Hydrocarbon Contamination Equipment For Soil And Groundwater Available In Newfoundland
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The BEAM 2 series perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 2 series guarantee frictionless industrial use for different applications (example: high power UV-lasers (>300 nm)). The Generator produces a continuous flow of hydrocarbon-free air. The flow is controlled stable. All Generators reduce the total quantity of ...
-
PremiumManufactured by CETCObased in USA
Our second finest grain media, ORGANOCLAY PM-199 features high adsorption capacity of oils, greases, and other NAPL. When used as an in-series filtration media prior to an activated carbon vessel, ORGANOCLAY PM-199 extends the life and adsorbency of the activated carbon by removing larger molecular organics that can cause fouling. ORGANOCLAY PM-199 also works as a standalone treatment media to ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The AirGen series ZA-TOTAL is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. It is also able to remove other pollutant like Humidity, CO2, CO, NOx, SO2 and Hydrocarbons. Very small in size, the ZA-TOTAL can filter up to 30 L/min of compressed Air and can withstand a pressure up to 8 bar (115 PSI). The reduction of hydrocarbons, including methane, and ...
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
MICROBE-LIFT/ HYDRO is a highly active dry culture consortium design specifically for use in petrochemical, refining, power generation, coal gasification, textile, steel cocking and land farming facilities to enhance overall biological oxidation capabilities. MICROBE-LIFT/ HYDRO – cultures significantly increase the oxidation of difficult to degrade compounds increasing overall wastewater ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The BEAM 1.0 performs in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments Beam 1.0 guarantee frictionless industrial use for different applications (example: high power UV-lasers (>300 nm)). The Generator produces a continuous flow of hydrocarbon-free air. The flow is controlled stable. All Generators reduce the total quantity of ...
-
PremiumManufactured by Sauereisen Inc.based in USA
ConoGlaze HC 222 is a two-component, NovolaK epoxy lining system that is used to protect concrete, steel and other substrates from chemical attack. ConoGlaze HC 222 is specifically formulated for maximum resistance to heat and chemical attack typically found in flue-gas and refining applications. When used as a topcoat for ConoCrete or FibreCrete systems, ConoGlaze improves appearance and ease of ...
-
PremiumManufactured by Vista Clara, Incbased in USA
Dart packs the power of magnetic resonance logging into a highly portable, battery-powered system operable by a single user. With Dart, any small-diameter bore—no matter how remote—becomes an opportunity for a high-resolution hydrogeologic log. Dart’s single-person deployment and operation enables measurement in remote or environmentally sensitive locations while eliminating the ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The AirGen series ZA TOTAL C HP is able to remove the total hydrocarbons to less than 0.05 ppm and other pollutant like Humidity, CO2, CO, NOx, SO2. ZA TOTAL C HP is available with a smart low noise built-in pistons compressor, 100% oil-free. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen ConoSpread – Epoxy NovolaK 260 Series is a group of epoxy coatings that provides a corrosion-resistant flooring system. The 260 is a pour and spread material for quick and easy application. By virtue of its NovolaK epoxy formulation, 260 is suitable for severe chemical environments. Where greater skid resistance is required, use the 261 Broadcast system in conjunction with the ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
Today, marine engine suppliers recommend daily monitoring of the Base Number (BN) to optimize cylinder lubrication feed rate and determine the residual BN of the piston underside oil. Changes in vessel operation are driving innovation in engine monitoring .The shift to “slow steaming” and the resulting “cold corrosion” affects every vessel in operation. Increased instances ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen 600 and 610 Sulfur-Based Mortars are used for concrete test cylinders and as a compound in the manufacturing of abrasive grinding wheel arbor holes. 600 is also used in the assembly of porcelain ceramic insulators in electrical transmission ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-5100 is a portable SO2 analyzer adopts ultraviolet fluorescence technique and combines advanced micro processing technology, which could provide accurate and reliable SO2 detection at low level ppb~ppm.This SO2 gas analyzer can be applied to atmospheric monitoring and dilution-based CEMS monitoring ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Acidproof Concrete 54 - with almost a half century of successful, varied service - is the original acid-resistant material for gunite construction. For those applications that require a lower K factor, lightweight materials, or higher temperature resistance, 54LW is available. 54 Gunite is potassium silicate, acid-resistant refractories for use as monolithic linings in chimneys, ...
-
PremiumManufactured by Sauereisen Inc.based in USA
A two component epoxy lining system that is used to protect steel and other substrates from chemical attack and abrasion. ConoGlaze AR 207 is a two component epoxy lining system that is used to protect concrete, steel and other substrates from chemical attack and abrasion. ConoGiaze AR 207 is specifically formulated for maximum resistance to abrasion, heat and chemical attack typically found in ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data is subject to reasonable ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The BEAM 2.0 performs in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 2.0 guarantee frictionless industrial use for different applications (example: high power UV-lasers (>300 nm)). The Generator produces a continuous flow of hydrocarbon-free air. The flow is controlled stable. All Generators reduce the total quantity of ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
MicroLab all-in-one automated lubricant analysis system for comprehensive, on-site testing. The MicroLab combines automation and artificial intelligence in an all-in-one oil analysis tool, making on-site oil analysis possible for any ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen High Temperature Membrane No. 89 is a single-component, asphaltic mastic recommended as an impervious membrane under corrosion-resistant monolithic linings or acid-resistant brick masonry for the protection of metal or concrete substrates. Spray application with airless equipment results in a flexible coating resistant to acids, alkalies and salts associated with flue gas environments ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data is subject to reasonable deviation. Data should not be used for specification ...
-
PremiumManufactured by CETCObased in USA
ORGANOCLAY F: A proprietary granular filtration media that reliably adsorbs oils and similar organics from water. It is a brown and black mixture of 30% active ORGANOCLAY and 70% anthracite filter media, which allows for maximum utilization of the large sorption capacity of ORGANOCLAY without excessive pressure build-up in the column. When used as an in-series filtration media prior to an ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you