Inclinometers Equipment For Soil And Groundwater In New Jersey
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-BEND Bending Weir System is designed to maintain maximum water levels upstream of the weir, thus allowing full usage of all the available upstream storage volume, while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The ACU-BEND’s unique, patented and extensively tested design operates by only allowing any excess water in the system ...
-
Manufactured by Arlington Scale Companybased in USA
Using a forklift to transfer cargo from a warehouse to a floor scale, and then to a final destination, wastes time, money and floor space. Now you can weigh, transfer and collect data in one efficient operation and reassign the space previously occupied by the floor scale. Rice Lake?s CLS-420 cargo lift scale saves operator time and equipment costs by eliminating the middle ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-BEND Overflow Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The TRU-BEND’s unique and extensively tested design operates by only allowing any excess water in the system to ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The SURE-BEND Hydraulically Operated Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The SURE-BEND’s unique and extensively tested design operates by only allowing any excess water ...
-
Manufactured by Campbell Scientific, Inc.based in USA
Campbell Scientific’s CSAT3B 3-D Sonic Anemometer is an update and replacement to the original CSAT3, and remains the 3-D sonic anemometer of choice for eddy-covariance measurements. It has an aerodynamic design, a 10 cm vertical measurement path, operates in a pulsed acoustic mode, and withstands exposure to harsh weather conditions. Three orthogonal wind components (ux, uy, uz) and the ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SkyVUE 8 LIDAR Ceilometer is ideal for measuring cloud base heights and vertical visibility at airports, helipads (onshore or offshore), and other meteorological applications. The SkyVUE™8 measures the atmosphere with high stability and repeatibility, providing you with information on cloud base heights, sky condition (up to five layers), vertical visibility, and raw backscatter ...
-
Manufactured by Gill Instruments Limitedbased in UNITED KINGDOM
The HS-100 3-axis anemometer features a horizontal head design, which allows for accurate measurement of vertical flows with minimum flow interruption from the anemometer geometry.Ideal for scientific research applications, HS-100 is capable of monitoring wind speeds of 0-45m/s and offers a fast update rate of 100Hz for precision wind analysis.The head of the anemometer features a built-in ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SkyVUE™8M Tactical LIDAR Ceilometer is ideal for quick tactical deployment (for permanent or temporary installation) for military or civilian applications in all climates. The ceilometer's robust construction requires minimal maintenance and enables continuous use and multiple deployments in the harshest of environments. Designed to be easily portable, the SkyVUE™8M has unique quick-deploy ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CSAT3BH is ideal for stations that are deployed in cold climates. The easy-to-use CSAT3BH sonic anemometer features smart heating that delivers just the right amount of heat to keep the instrument free of ice and snow, enabling continuous and reliable measurements in cold environments. The CSAT3BH is designed to prevent ice accumulation on the sensor, avoiding prolonged periods of data ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AVW206 is a vibrating-wire analyzer module that includes an internal 910 to 918 MHz spread-spectrum radio for wireless communication, typically used in the U.S. and Canada. With this vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety of ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AVW211 is a vibrating-wire analyzer module that includes an internal 920 to 928 MHz spread-spectrum radio for wireless communication, typically used in Australia and New Zealand. With this vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SkyVUE™8M Tactical LIDAR Ceilometer is ideal for quick tactical deployment (for permanent or temporary installation) for military or civilian applications in all climates. The ceilometer's robust construction requires minimal maintenance and enables continuous use and multiple deployments in the harshest of environments. Designed to be easily portable, the SkyVUE™8M has unique ...
-
Manufactured by Rico GmbHbased in GERMANY
The FW100CT.2 is a versatile camera carriage for sewer inspection from a pipe diameter of 100 mm and bigger. The carriage can be optimally configured for every pipe diameter. The steerable carriage is driven by 6 easily exchangeable quick change wheels, which can be changed in seconds without tools. The FW100CT.2 can handle larger pipe diameters with the electric elevator. This is recommended for ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SkyVUE PRO LIDAR ceilometer measures cloud height and vertical visibility for meteorological and aviation applications and is ideal for long-term research applications where a high level of detail is required. Its robust construction is ideal for long-term installation, as it requires minimal maintenance and features a unique stratocumulus calibration procedure—allowing the ceilometer ...
-
Manufactured by Gill Instruments Limitedbased in UNITED KINGDOM
The HS-50 horizontal-head anemometer has been designed for scientific research applications requiring accurate 3-axis wind speed and direction information.This instrument utilises advanced ultrasonic measurement technology, with a unique horizontal head design that allows for more accurate measurement of vertical flows with minimal interruption from the anemometer geometry. The head features a ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SkyVUE™PRO LIDAR ceilometer measures cloud height and vertical visibility for meteorological and aviation applications and is ideal for long-term research applications where a high level of detail is required. Its robust construction is ideal for long-term installation, as it requires minimal maintenance and features a unique stratocumulus calibration procedure—allowing the ...
-
Manufactured by Campbell Scientific, Inc.based in USA
With an AVW200 vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety of structural, hydrological, and geotechnical applications because of their stability, accuracy, and durability. The VSPECT technology is protected under U.S. Patent No. ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AVW216 is a vibrating-wire analyzer module that includes an internal 2.4 GHz spread-spectrum radio for wireless communication in many countries worldwide. With this vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety of structural, ...
-
Manufactured by Gill Instruments Limitedbased in UNITED KINGDOM
The R3-100 anemometer is ideal for scientific research applications, with a fast sampling rate of 100Hz. This 3-axis ultrasonic anemometer is used extensively for the determination of fluxes using the Eddy Covariance method.R3-100 will monitor wind speeds of 0-45m/s at environmental operating temperatures of -40ºC to +60ºC. Analogue, sonic temperature, speed of sound and U,V,W vector ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you