Inclinometers Equipment For Soil And Groundwater Near Europe
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
The HP5 heated sampling probe is ideal for the determination of particulate matter and chemicals in the gas phase.Its unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, which is needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2 – this also allows it to be easy to move it with just two ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
The new electronic NDW 2 inclinometer utilises a modern measurement method based on MEMS technology for gravitational inclination measurement (rotational angle ...
-
Manufactured by Vectory Sensor Systems ApSbased in DENMARK
The Vectory Sensor Systems Millirad is a low power subsea tilt sensor / inclinometer, ideally suited for accurate long-term monitoring of subsea installations. ...
-
Manufactured by Vectory Sensor Systems ApSbased in DENMARK
The Vectory Sensor Systems Microrad is a rugged, versatile, very high accuracy tilt sensor / inclinometer, ideal for any kind of application where reliable, accurate tilt measurements are needed. The Microrad consists of 3 high accuracy state-of-the art low-noise MEMS accelerometers. These are used to measure the apparent gravity to output values of pitch, roll and inclination. ...
-
Manufactured by Beanair GmbHbased in GERMANY
Available in several versions (±30°or ±90° bi-axis), the BeanDevice INC is a wireless accelerometer with integrated data logger.Characterized by a waterproof (IP67/Nema 6) and a lightweight aluminum casing (80x55x21mm, 155g), an ultra-low power (30 µA in sleeping mode), an integrated data logger that can store up to 1 million data logs, as well as a tiny radome omni ...
-
Manufactured by Beanair GmbHbased in GERMANY
Available in several versions (±15° or ±30° in mono-axis/bi-axis), the BeanDevice® HI-INC is a wireless accelerometer with integrated data logger. Characterized by a waterproof (IP67/Nema 6) and a lightweight aluminum casing (80x55x21mm, 155g), an ultra-low power (30 µA in sleeping mode), an integrated data logger that can store up to 1 million data logs, as well ...
-
Manufactured by Ruptelabased in LITHUANIA
Ruptela developed and manufactured fuel level sensor (FLS) for fuel monitoring, control and theft prevention. It is the latest company product created for fuel control. Available in PRO and ECO ...
-
Manufactured by Poul Tarp A/Sbased in DENMARK
MWS Mobile Weighing Systems are designed and manufactured for on-board weighing on ...
-
Manufactured by Ingenjorsfirman Geotech ABbased in SWEDEN
The Geotech Nova CPTU probes are designed for use on land as well as off shore, and give accurate measurements of cone resistance (qc), sleeve friction (fs), pore pressure (u) and inclination. The probes can optionally be equipped with temperature sensor. Options for sintered pore pressure filters in u1 and u2 positions as well as slot filters are available. The equipment is available with ...
-
Manufactured by Gemac Chemnitz GmbHbased in GERMANY
The 1-dimensional inclination sensor IS1TK360-O-RL is suitable to measure the inclination in the range of 360°. To ensure a high accuracy, the sensor is calibrated at the ...
-
Manufactured by Gemac Chemnitz GmbHbased in GERMANY
The 2-dimensional inclination sensor IS2TK090-C-RL is suitable to measure the inclination in 2 dimensions (X/Y) in a range of ±90°. To ensure a high accuracy, the sensor is calibrated at the ...
-
Manufactured by Gemac Chemnitz GmbHbased in GERMANY
The 1-dimensional inclination sensor IS1TK360-C-RL is suitable to measure the inclination in the range of 360°. To ensure a high accuracy, the sensor is calibrated at the ...
-
Manufactured by Gemac Chemnitz GmbHbased in GERMANY
The GEMAC Motus series XC is a 2-axis tilt sensor and a 6-axis inertial measuring unit consisting of an acceleration and gyro sensor. It allows the measurement of acceleration, rotation rate, and tilt in one device. It is characterized by high accuracy, which is achieved by a factory ...
-
Manufactured by Gemac Chemnitz GmbHbased in GERMANY
The GEMAC Motus® series XB is a 2-axis inclination sensor and a 6-axis inertial measuring unit consisting of an acceleration and gyro sensor. It allows the measurement of acceleration, rotation rate, and tilt in one device. It is characterized by high accuracy, which is achieved by a factory ...
-
Manufactured by Gemac Chemnitz GmbHbased in GERMANY
The GEMAC Motus series XB is a 2-axis inclination sensor and a 6-axis inertial measuring unit consisting of an acceleration and gyro sensor. It allows the measurement of acceleration, rotation rate, and tilt in one device. It is characterized by high accuracy, which is achieved by a factory ...
-
Manufactured by Campbell Scientific, Inc.based in USA
Campbell Scientific’s CSAT3B 3-D Sonic Anemometer is an update and replacement to the original CSAT3, and remains the 3-D sonic anemometer of choice for eddy-covariance measurements. It has an aerodynamic design, a 10 cm vertical measurement path, operates in a pulsed acoustic mode, and withstands exposure to harsh weather conditions. Three orthogonal wind components (ux, uy, uz) and the ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AVW206 is a vibrating-wire analyzer module that includes an internal 910 to 918 MHz spread-spectrum radio for wireless communication, typically used in the U.S. and Canada. With this vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety of ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AVW211 is a vibrating-wire analyzer module that includes an internal 920 to 928 MHz spread-spectrum radio for wireless communication, typically used in Australia and New Zealand. With this vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SkyVUE 8 LIDAR Ceilometer is ideal for measuring cloud base heights and vertical visibility at airports, helipads (onshore or offshore), and other meteorological applications. The SkyVUE™8 measures the atmosphere with high stability and repeatibility, providing you with information on cloud base heights, sky condition (up to five layers), vertical visibility, and raw backscatter ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CSAT3BH is ideal for stations that are deployed in cold climates. The easy-to-use CSAT3BH sonic anemometer features smart heating that delivers just the right amount of heat to keep the instrument free of ice and snow, enabling continuous and reliable measurements in cold environments. The CSAT3BH is designed to prevent ice accumulation on the sensor, avoiding prolonged periods of data ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you