Magnetometers Equipment For Soil And Groundwater Available In Austria
-
ShowcaseManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The Falmouth Scientific HMS-624 Side Scan Sonar System utilizes advanced technology to provide superior imaging capabilities for deep and shallow water ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs GPS-Aided Inertial Navigation System (INS-U) is an IP67 rated version of the new generation, fully-integrated, combined Inertial Navigation System (INS) + Attitude & Heading Reference System (AHRS) + Air Data Computer (ADC) high-performance strapdown system, that determines position, velocity and absolute orientation (Heading, Pitch and Roll) for any device on which it is ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs GPS-Aided Inertial Navigation System (INS-U-OEM) is OEM version of new generation, fully-integrated, combined GPS, GLONASS, GALILEO, QZSS and BEIDOU GNSS and high-performance strapdown system, that determines position, velocity and absolute orientation (Heading, Pitch and Roll) for any device on which it is mounted. Horizontal and Vertical Position, Velocity and Orientation are ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN multi-purpose CPT penetrometer platform is an economical skid-based rig with full CPT testing capabilities. It comes with CW-couplings for quick and easy attaching to a hydraulic excavator. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Railway Motion Control Unit – RMCU is a high-performance strapdown system developed for Railway applications to determine the absolute orientation (Heading, Pitch, and Roll) and motion parameters (Angular Rates and Linear Accelerations) for any Railway Platforms on which it is mounted. Orientation is determined with high accuracy for both motionless and dynamic ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
The Series 10031-M Multi-Purpose Hydrographic Winch is compact and portable, engineered for long-term durability, and reliability necessary for towing geotechnical equipment such as side-scan sonars, sub-bottom profilers, and magnetometers. It is also used for geophysical applications such as sediment sampling and coring, in addition to hydrographic work including CTD and sound velocity ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
Developed by Inertial Labs, the Optically-enhanced Attitude and Heading Reference System – OptoAHRSTM-II is a small size, lower power consumption, precise North-finding and North-keeping system. It combines technologies of inertial sensors with optical image tracking resulting in a robust and reliable 3DOF orientation module capable of operation in virtually any ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
This super portable Poseidon ROV is a premium underwater drone designed on more than 8 years of experience manufacturing underwater video and lighting equipment for commercial diving and Remote Operated Vehicles. These systems are tailor made for commercial diving and have been used in many underwater applications including fish farming, harbor surveillance, testing tanks for leaks, aquarium ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
Inertial Labs has developed Motion Reference Units (MRU) to meet requirements from marine and hydrographic applications. MRU is enhanced, high-performance strapdown Motion Sensor, that determines Pitch & Roll, Heave, Sway, Surge, Accelerations, Angular rates, Heading, Velocity and Positions for any device on which it is ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Measure excess pore pressure that is generated during soil penetration with our digital CPTU piezocone testing system. In the quotations, Gouda Geo-Equipment issues a clear distinction is made between on one hand the CPT penetrometer pusher (this could either be a truck-based, crawler-based, trailer-based or stand-alone unit) and on the other hand the CPT system (this could either be mechanical ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The MS-IMU3030 Inertial Measurement Unit delivers unmatched low drift performance in an ultra-compact aluminum package. The IMU contains triaxial MEMS gyros, accelerometers and magnetometers that are extensively tested and calibrated over the full operational temperature range to ensure the highest performance and robust operation. The gyro bias stability of 0.55 degrees per hour and accel bias ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
The Series 10031 is a Heavy Duty, Compact Winch with a remarkable capacity for its size. This configuration is ideally suited for handling larger diameter tow cables required by side-scan sonar, sub-bottom profilers, magnetometers, or towed vehicles from small to medium-sized vessels. The Series 10031 is available with level wind, grooved drum, slip ring, and either electric or hydraulic drive ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
Turn your buoy into an intelligent data collecting platform with the Aanderaa MOTUS Stand-Alone Sensor. There are numerous ways of measuring Ocean Waves. At Aanderaa we have focused on three different types of measurement. One option is the MOTUS Directional Wave Sensor suitable for integration on different buoy types. It is intended for commercial as well as research use. The sensor processes ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
LaserNet 200 Series is a contamination and wear debris analyzer that monitors lubricant condition for predictive maintenance. Particle Analyzer: The LaserNet 200 Series allows reliability professionals to quickly and easily assess machinery health in just minutes. By testing only a few milliliters of fluid, users see a complete picture of machine wear and particulate contamination. This enables ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The digital CPT-logger is the heart of the data acquisition system for geotechnical and environmental testing procedures, such as cone penetration testing (CPT). It is to be used in combination with a standard laptop or industrial computer and data acquisition software, such as a CPT-Explorer. You can order this innovative product at Gouda ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
Monitoring lubricant condition in machine wear when and where it is needed significantly reduces the time required for laboratory analysis and improves machine reliability. Spectro Scientific offers a wide range of portable devices with field simplicity and lab accuracy. The product combinations are powerful for different applications as together they provide more comprehensive analysis of oil ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs Wave Sensor (WS) product line is the latest tactical-grade MEMS-based inertial sensor solutions release. In 2016 Inertial Labs responded to the research and development sectors of many biology and geographic analysis facilities for a device that can monitor Ocean Characteristics for Maritime Observation and Analysis. Inertial Labs has developed its Wave Sensors (WS) to meet ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
Inertial Labs has developed a professional version of Motion Reference Units (MRU-PD) to meet the requirements from marine and hydrographic applications. The MRU-PD is an enhanced, high-performance strapdown Motion Sensor - affordable solution for survey, that determines Pitch & Roll, Heave, Sway, Surge, Accelerations, Angular rates, Heading, Velocity and Positions for any device on which it ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs Attitude and Heading Reference Systems, AHRS-II is the next generation of enhanced, high-performance strapdown systems that determines absolute orientation (Heading, Pitch and Roll) for any device on which it is mounted. Orientation is determined with high accuracy for both motionless and dynamic ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The FerroTec FT 10 helps you safely and reliably locate concealed shaft covers, sliding rods and caps, as well as pavement markers and other objects. The only requirement is that they are made of iron, cast iron or steel. The ergonomic design, convenient operation and precise measuring technology make your work fast and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you