Eijkelkamp Soil And Groundwater Equipment Available In Tonga
-
ShowcaseManufactured by Royal Eijkelkampbased in NETHERLANDS
Auger set for heterogeneous soils, standard set for augerings to a depth of 5 m. With unpainted augers for environmental ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 6 measuring elements with a measuring range of 100 cm so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
In principle it is possible to design the soil water permeameters in any required size. The size is determined by the number of soil samples of which the saturated water permeability is to be determined simultaneously. Designs for 5 up to 25 soil sample rings can be supplied. The permeameters are available for soil sample rings with an external diameter of 53 or 60 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The hand penetrometer for top layers is a device that is used to determine the penetration resistance of top layers. Because of the limited overall length of the device, the hand penetrometer can also be used for horizontal measurement, for instance in the walls of profile ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The filter apparatus, suitable for field and laboratory, has a net filtration area of 130 cm2. The medium to be filtered only has contact with the chemically inert teflon. The rest of the apparatus consist of stainless steel. If the proper filter membrane is used, very agressive fluids and gasses can also be filtered. The filter apparatus can be connected in-line to a peristaltic pump, nitrogen ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Monitoring well lock to lock monitoring wells with an inner Ø of 28 mm (total range 27-29 mm), with vandalism proof inner socket head screw, hexagonal. Also suitable for installation of the DIVER in a monitoring well. Set of 3 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Membrane apparatus for pF determination pF 3.0 - 4.2 (1.0 - 15.0 bar). Standard set for maximal about 15 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Monitoring well lock to lock monitoring wells with an inner Ø of 51 mm (total range 50-53 mm), with vandalism proof inner socket head screw, hexagonal. Also suitable for installation of the DIVER in a monitoring well. Set of 3 pieces. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Geologist hammers can be obtained pointed or with a blade. They are used to obtain a rough indication of the hardness of soil or rock, the removing of fossils, scraping stones, emptying gouges and many other ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This self-priming (up to a depth of 6 meter) centrifugal pump is used primarily for (fast) purging or emptying of monitoring wells and bore holes. Other applications are pumping water for irrigation, drinking water for cattle, etc. The pump has a quiet, reliable starting, economical fourstroke engine running on ordinary or unleaded petrol. The pump is not sensitive to polluted water and the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Handle, normal, 60 cm, bay. (incl. coupling ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Monitoring well lock to lock monitoring wells with an inner Ø of 25 mm (total range 24-25 mm), with vandalism proof inner socket head screw, hexagonal. Also suitable for installation of the DIVER in a monitoring well. Set of 3 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Granular composition test set, complete set with sieve shaker and standard set of sieves for dry and wet ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Probing rod Ø 9 mm for penetrologger CBR, set of 3 pieces for depth measurements till 70 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil gas analysis can yield a lot of information concerning the soil environment. Using a ‘piercing probe’ and an oxygen content meter the growing conditions for shrubs and trees can be defined. And who would not want to be able to measure the extent of soil pollution in an area without timeconsuming soil ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture meter to read out the Thetaprobe, the W.E.T. sensor, the profile probe and the SM300 soil moisture sensor. With 25-way D socket. Inclusive operating instructions, PC software and RS 232 cable. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Double ring infiltrometer, standard set for synchronic measuring in threefold. Measurements according to ASTM D3385-03. Standard test method and DIN ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Root research is executed to improve the insight in the possibilities for root growth (depth and concentration) of the root system of trees and plants. In general it is important to all plants to have a dense and extensive root system in the soil. An extensive root system allows the plant to benefit from a large volume of soil. If sufficient quantities of nutrients and water are present the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This translucent teflon and stainless steel sampler is specially suitable for the indication of layers, measuring the thickness of the floating layer and the sampling of drums, tanks on lorries, gully holes and shallow oil separators. With the liquid layer sampler also depth specific samples can be taken. The translucent sample tube allows for immediate research in the field of for instance the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. In this product information leaflet a number of gouge augers are described. Their mutual quality is that they are all fitted with an almost half cylindrical operational part with parallel cutting edges running vertically, justifying the name gouge auger. This operational part may vary in length as well as in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you