Singer Valve Soil And Groundwater Equipment In South Africa
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RF and 206-RF rate of flow control valves are based on the 106-PG or 206-PG main valves. The valve is ideal for limiting the flow to a pre-determined maximum (via maintaining a continuous pressure differential across an orifice). When the pressure differential is less than the set-point, the valve opens, allowing flow to meet predetermined demand. At the desired maximum set-point, the ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 420-DC or 420-AC provide for a reliable, simple and cost efficient way to automate today’s water systems. A sturdy slow speed 24 VDC motor actuator drive can be installed on a variety of Singer pilots. The motor actuator responds to a 4-20 mA signal, rotating the pilot adjusting screw corresponding to the change in signal. The number of turns is adjustable and may be programmed to suit ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-S and 206-PR-S pressure reducing valves with downstream surge control are based on the 106-PG or 206-PG main valve. Pressure reducing pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-48 and 206-PR-48 series pressure reducing valves with low flow by-pass are based on the 106-PG or 206-PG main valve. In addition, a direct acting pressure reducing valve is piped in parallel, using the main valve back port connections. The pilot valve senses the downstream pressure through a connection at the main valve outlet. Under flowing conditions, the pilot reacts to small ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-A-Type 1 and 206-A-Type 1 altitude control valves are based on the 106-PG or 206-PG main valve and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 1 allows normal forward flow to fill the reservoir to the maximum level and then closes drip-tight at the set-point. It opens to allow ...
-
Manufactured by Mueller Water Productsbased in CANADA
The X107 position indicator stem is designed to provide direct indication of the diaphragm / inner valve position. The indicator stem moves up and down within its protective hexagonal brass housing. Within the housing is clear Pyrex sight glass, which allows viewing from both sides. Singer main control valves are designed with a separate stem cap that makes installation of the X107 safe and ...
-
Manufactured by Mueller Water Productsbased in CANADA
For use with grooved Iron Pipe Size (IPS) Pipe Coupling Products, grooved ends allows you to benefit from the simplicity and convenience of grooved end piping and fittings in an automatic control valve. There are a wide range of applications where grooved ends are relevant, but typical applications include municipal water, waste water, fire protection and ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer models 106-2SC-MV and 206-2SC-MV electronic flow control and metering valves are based on the 106-PG or 206-PG main valve. The pressure in the upper operating chamber is controlled by operating the pilot solenoids. The PLC within the MV1-TP control panel determines whether the opening solenoid or the closing solenoid is operated. The change in valve position is dependent upon which ...
-
Manufactured by Mueller Water Productsbased in CANADA
Micrometer flow control valves allow for precise flow control. There is full flow in one direction and adjustable restricted flow in the opposite direction. They are standard on certain models, such as BPC pump control valves and available as an option for other applications. Standard end connections are female-to-female 1/4 in / 6.35 mm ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-F-Type 5 and 206-F-Type 5 non-modulating float valves are based on the 106-PG or 206-PG main valve. It is ideal for allowing normal forward flow to fill water reservoirs to a desired high level and where the pilot and valve of the reservoirs are easily ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PG series control valve is designed to suit a large variety of applications such as pressure, flow or level control. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively maintain accurate water control. Refer to Main Valve Options and Pilots & Accessories to customize the valve to suit specific ...
-
Manufactured by Mueller Water Productsbased in CANADA
The SPC pump control panel provides the interface between the pump motor starter and the Singer pump control valve. The SPC ensures that the pump starts and stops without causing line ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Internal Drop Check (IDC) ensures quick positive shut-off whenever normal forward flow stops, this action will prevent reverse flow while reducing surge events. The IDC assembly is a spring assisted, silent, mechanical check option for standard Singer main valves and comes in sizes ranging from 2 in / 50 mm – 36 in / 900 mm. The IDC is a standard feature on the 106-PTC and 206-PTC ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer 106/206-2PR-630 Pressure Management Valve is a simple package to save water loss and money. It meets system needs by providing higher pressure when called for 24/7 and reduced pressure to save water leakage (and money) at all other times. An orifice with a low pressure drop 1.0 psi, (0.07 Bar) is installed upstream of a standard pressure reducing valve fitted with an extra pressure ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 852-B needle valve is a pilot speed control valve. The body is brass and the stem is stainless steel with a fine thread for controlling flow. O ring packing assures leak proof, trouble free service. 1/4 in / 7.5 mm NPT female to female end connections. ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-R and 206-PR-R pressure reducing and pressure sustaining valves are based on the 106-PG or 206-PG main valve with the addition of the sustaining pilot 81-RP and pressure reducing pilot PR-160. Provided the upstream pressure setting is satisfied, the 81-RP pilot is kept open, permitting the valve to be controlled by the 160 pilot. The 160 pilot senses downstream pressure and under ...
-
Manufactured by Mueller Water Productsbased in CANADA
The SCP-TP Controller is a simplified process controller designed to complement the Dual Solenoid Control Valve. It offers quick and easy configuration for any single process application as well as on/off applications. The SCP-TP is also equipped to be configured to control the Singer 420DC Motor. Range of application is dependent on the process variable (feedback) transmitter used, which ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 26 flow stabilizer is a self-cleaning, opening speed control. It is used in conjunction with a fixed restriction orifice that is usually threaded into port 3. The 26 stabilizer allows free flow down to the bonnet (port 1) and restricts flow up from port 1. The 26 stabilizer is used as the standard flow stabilizer (opening speed control) on model 106-PR or 206-PR pressure ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS and 206-RPS pressure sustaining valves are based on the model 106-PG or 206-PG main valve. The 81-RP pilot senses the upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RW and 206-RW series control valves offer superior corrosion resistance performance in grey or reclaimed water applications and can be used in all standard and special applications. It’s constructed from materials which are selected specifically to address corrosion concerns from chlorine, chloramine, and other corrosive elements typically found in grey or reclaimed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you