Remediation Design Equipment For Soil And Groundwater Available In Burkina Faso
-
based in USA
Operation of the CETCO MONARCH CPI Separator is simple and efficient. Liquid flow is introduced into the CETCO MONARCH CPI separator via gravity or at a specific pressure. The CETCO MONARCH CPI Separator distributes flow and creates the necessary laminar flow for proper oil & water separation. The CETCO MONARCH CPI Separator and its internal CETCO MONARCH CPI Pack provides the necessary ...
-
Manufactured by Bio S.I. Technology LLCbased in USA
The Bio S.I. Remediation Kit is designed for small contaminated areas where control is needed for treatment programs around oil/gas well heads to insure proper treatment regimens are being followed and the correct amount of products are being used. This remediation kit comes with the products needed for cleaning up spills from equipment, refueling stations, and also of ruptured tanks etc. It has ...
-
Manufactured by Innovative Geotechnical Instrumentationbased in INDIA
The model IG 1401 piezometer consists of a rigid cylindrical housing, of diameter 20mm having the innovative vibrating wire sensor inside. The vibrating wire sensor element is completely isolated from the total stresses acting on the body by the help of O rings. The unique design gives a slimline body which accurately reads water pressure without being affected by the surrounding stresses. The ...
-
Manufactured by SiREMbased in CANADA
SiREM is pleased to announce a comprehensive passive sampler and interpretation service (SP3™) for the quantification of hydrophobic organic compounds, including PCBs and PAHs in pore water (sediment and soil), surface water and ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AP4+ Top Inlet Short, AP4+ Low Drawdown Top Inlet, AP4+ Bottom Inlet Short and AP4+ Low Drawdown Bottom Inlet AutoPump provide maximum capabilities and flow in a pump for 4” (100mm) diameter and larger wells and the need for an elevated inlet, such as pumping total fluids from wells contaminated with ...
-
Manufactured by Remediation Products Incorporated (RPI)based in USA
BOS 200 is a Trap & Treat in situ remediation technology specifically designed to degrade petroleum hydrocarbons, related solvents, and oils. BOS 200 is a complete system effecting accelerated biodegradation of various organic compounds on an activated carbon platform that includes micro and macro nutrients, time release terminal electron acceptors, and a blend of facultative organisms ...
-
Manufactured by FLIR Systems Inc.based in USA
The IBAC is a continuously-operating monitor that provides early warning of biological aerosol threats. The IBAC facilitates the process of identifying bio-terror agents to allow timely containment, treatment and remediation. Monitors are designed to detect concentrated levels of biological aerosols. Possible agents released in a bio-threat attack can include bacterial spores (such as B. ...
-
Manufactured by Evonik Active Oxygens (fka PeroxyChem)based in USA
EHC® Metals Reagent is a remediation product for immobilization of metals combining controlled-release carbon, micro-scale zero-valent iron & a slow-release of sulfate. Following placement of EHC Metals Reagent into the saturated zone, a number of chemical and microbiological processes combine to create strongly reducing conditions under which a number of heavy metals are sequestered via ...
-
Manufactured by EnviroLogicbased in USA
Bio-W is the first bio-remedial, floating absorbent designed to absorb and control hydrocarbons on water. This product has the ability to repel water, allowing it to 'hold' only the hydrocarbon it absorbs. When the hydrocarbons are 'locked' into the fibres of Bio-W the microbes will begin to bio-remediate the contaminant turning the hydrocarbon into harmless carbon dioxide (CO2) and water. Bio-W ...
-
Manufactured by GeoStream Srlbased in ITALY
The on-site treatment of soils and groundwater is a necessity involving any sector requiring environmental remediation. We design and develop solutions for the on-site remediation of contaminated soils and build systems for the treatment of groundwater and wastewater deriving from various processes. Our staff’s many years of experience and training allows us to accompany the client from the ...
-
Manufactured by Vulcan Drying Systemsbased in USA
Vulcan Drying Systems Indirect Fired Thermal Desorption Unit - new 6' diameter x 30' long heated zone indirect fired 304 stainless steel rotary kiln with combustion chamber, a total of 16.2 MMBtu/hr. of North American combination fuel burners (pre-piped for oil firing), and drive powered by a 7.5 hp motor. Designed to remediate soils and drilling muds contaminated with petroleum hydrocarbons. ...
-
Manufactured by Fiberlock Technologies, Inc.based in USA
Our EPA Category IV disinfectant, cleaner and odor neutralizer is effective in all restoration and remediation applications. Designed for general cleaning and disinfecting of hard, non-porous environmental surfaces, it cleans quickly by removing dirt, grime, mold, mildew and other common soils found in hospitals, nursing homes, schools and colleges, medical, dental offices and life science ...
-
Manufactured by C.E.R.E.S. Corporationbased in USA
BioGeoChemical Reduction (BGCR) BGCR combines physical, chemical, and microbiological (i.e. biogeochemical) processes to create strong reducing conditions that achieve rapid contaminant destruction by abiotic and biotic reduction. BGCR contains Zero Valent Iron, the highest purity microcrystalline cellulose combined with oxygen scavenger, nutrients, and Vitamin B12 for biostimulation of ...
-
Manufactured by Remediation Products Incorporated (RPI)based in USA
BOS 100 is a Trap & Treat in situ remediation technology specifically designed to degrade chlorinated solvents. It is a unique material manufactured from high grade virgin carbons (intended for use in food or drinking water applications). The food grade carbon is impregnated with metallic iron formed under reducing conditions at a temperature of roughly 850 degrees C. At this temperature, as ...
-
Manufactured by Cascade Drillingbased in USA
Successful and cost effective LNAPL site management requires a CSM, including detailed knowledge of NAPL location and distribution. The Ultra-Violet Optical Screening Tool (UVOST) provides these data with unmatched speed, detail, and efficiency. Optimize your remedial design by finding, delineating and quantifying aromatic LNAPL with UVOST, a laser induced fluorescence direct sensing tool. ...
-
Manufactured by RLC Technologies, Inc.based in USA
Drum Dimensions: 54 inch Diameter x 48 feet length. Processing Capacity: Light Oil Waste: 4-6 TPH. Heavy Oil Waste: 1-2 ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
CMT Multilevel System consists of 7 discrete zones. Zones are packed off using bentonite to eliminate vertical contamination between sand packed sampling ports. Depth discrete data obtained from CMT increases risk assessment accuracy, improves decision making, optimizes performance of site remediation, and provides vertical hydraulic head data for model calibration. Narrow 3-channel option as ...
-
Manufactured by EthicalChembased in USA
EthicalChem operates with a flexible business model providing chemical supply, technical support, full-scale remedial design, and/or implementation project management. Levels of support are based on client preference and site specific requirements. We provide our clients with cost effective approaches to achieve project goals. EthicalChem's products and technologies have been implemented at over ...
-
Manufactured by econ industries services GmbHbased in GERMANY
Remediation of mercury contaminated industrial site for future expansion of industrial area. 70,000 tons of mercury contaminated soil and building rubble have to be cleaned in an industrial facility in the south of France until 2013. For the realization of this remediation work, an econ industries VacuDry 12,000 has been in operation since early 2011. After the treatment the mercury free soils ...
-
Manufactured by Tarmac International, Inc.based in USA
Tarmac's 6' x 40' Indirect fired rotary thermal soil remediation plant has been designed to move as container sized loads. This thermal remediation system has a vertical equipment design and has a very small foot print. Thermal Soil Remediation projects can encompass higher ranges of Parts Per Million hydrocarbons as found in waste pits and drill cutting. Portable designs are available also with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you