Remediation Design Equipment For Soil And Groundwater Near Virginia
-
Manufactured by RLC Technologies, Inc.based in USA
Drum Dimensions: 96 inch Diameter x 56 feet length. Processing Capacity: Light Oil Waste: +10 TPH. Heavy Oil Waste: 5-8 ...
-
Manufactured by RLC Technologies, Inc.based in USA
Drum Dimensions: 76 inch Diameter x 48 feet length. Processing Capacity: Light Oil Waste: 7-9 TPH. Heavy Oil Waste: 2-4 ...
-
Manufactured by RLC Technologies, Inc.based in USA
Drum Dimensions: 54 inch Diameter x 48 feet length. Processing Capacity: Light Oil Waste: 4-6 TPH. Heavy Oil Waste: 1-2 ...
-
Manufactured by Nikro Industries, Inc.based in USA
The PS1000 portable air scrubber is constructed of dent and corrosion resistant polyethylene and has been specifically designed for remediation, restoration and abatement contractors. The uniquely designed filtration system with a 99.97% Certified HEPA Filter is located after the motor assembly. This design not only filters particulate from the work area, but also prevents carbon and bearing ...
-
Manufactured by FLIR Systems Inc.based in USA
The IBAC is a continuously-operating monitor that provides early warning of biological aerosol threats. The IBAC facilitates the process of identifying bio-terror agents to allow timely containment, treatment and remediation. Monitors are designed to detect concentrated levels of biological aerosols. Possible agents released in a bio-threat attack can include bacterial spores (such as B. ...
-
Manufactured by Fiberlock Technologies, Inc.based in USA
Our EPA Category IV disinfectant, cleaner and odor neutralizer is effective in all restoration and remediation applications. Designed for general cleaning and disinfecting of hard, non-porous environmental surfaces, it cleans quickly by removing dirt, grime, mold, mildew and other common soils found in hospitals, nursing homes, schools and colleges, medical, dental offices and life science ...
-
Manufactured by Cascade Drillingbased in USA
Successful and cost effective LNAPL site management requires a CSM, including detailed knowledge of NAPL location and distribution. The Ultra-Violet Optical Screening Tool (UVOST) provides these data with unmatched speed, detail, and efficiency. Optimize your remedial design by finding, delineating and quantifying aromatic LNAPL with UVOST, a laser induced fluorescence direct sensing tool. ...
-
Manufactured by Provectus Environmental Products, Inc.based in USA
Developed in collaboration with AquaBlok, LTD subaqueous caps can be constructed more effectively by minimizing gas ebullition and contaminant ...
-
Manufactured by Evonik Active Oxygens (fka PeroxyChem)based in USA
EHC® Metals Reagent is a remediation product for immobilization of metals combining controlled-release carbon, micro-scale zero-valent iron & a slow-release of sulfate. Following placement of EHC Metals Reagent into the saturated zone, a number of chemical and microbiological processes combine to create strongly reducing conditions under which a number of heavy metals are sequestered via ...
-
Manufactured by EnviroLogicbased in USA
Bio-W is the first bio-remedial, floating absorbent designed to absorb and control hydrocarbons on water. This product has the ability to repel water, allowing it to 'hold' only the hydrocarbon it absorbs. When the hydrocarbons are 'locked' into the fibres of Bio-W the microbes will begin to bio-remediate the contaminant turning the hydrocarbon into harmless carbon dioxide (CO2) and water. Bio-W ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
CMT Multilevel System consists of 7 discrete zones. Zones are packed off using bentonite to eliminate vertical contamination between sand packed sampling ports. Depth discrete data obtained from CMT increases risk assessment accuracy, improves decision making, optimizes performance of site remediation, and provides vertical hydraulic head data for model calibration. Narrow 3-channel option as ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AP4+ Top Inlet Short, AP4+ Low Drawdown Top Inlet, AP4+ Bottom Inlet Short and AP4+ Low Drawdown Bottom Inlet AutoPump provide maximum capabilities and flow in a pump for 4” (100mm) diameter and larger wells and the need for an elevated inlet, such as pumping total fluids from wells contaminated with ...
-
based in USA
With over 15 years of chemical amendment addition experience by industry-leading design engineers, ARS uses a wide range of materials/chemicals when designing remediation options involving chemical oxidation. ARS’ Design Engineers will select the chemical and an activator as needed based on site specific factors, including the target contaminants, lithology, and hydrogeology. Equally as ...
-
Manufactured by Product Level Control Inc. (PLC)based in USA
Product Level Control provides a full line of thermal, electric, and catalytic oxidizers to the Soil and Groundwater Industry. By specializing in lower air flow oxidizers, specifically designed for remediation applications, we meet your individual project goals for the best possible value. e accurately size and specify model type according to your air flow requirements, the type and concentration ...
-
Manufactured by ModuTank Inc.based in USA
In a growing number of applications, custom above ground water storage tanks or modular storage systems are increasingly utilized as alternatives to conventional round tanks. Among the advantages claimed for modular systems are lower per-gallon storage costs, ready availability from inventory, and rapid shipment and installation for permanent or emergency storage and remediation. By design, ...
-
based in USA
EZ-Ox is a proprietary (patents pending) solid-chemical composition that provides a sustained release of oxygen and phosphate nutrients into contaminated aquifers and environmental media.EZ-Ox was specifically developed to provide improved means for the aerobic bioremediation of dissolved-phase hydrocarbons in ground-water aquifers and aquifer media.EZ-Ox contains more than 50% more oxygen, ...
-
based in CANADA
The BEAST1000 portable air scrubber is constructed of dent and corrosion resistant polyethylene and has been specifically designed for remediation, restoration and abatement contractors. The uniquely designed filtration system with a 99.97% Certified HEPA Filter is located after the motor assembly. ...
-
Manufactured by SiREMbased in CANADA
SiREM is pleased to announce a comprehensive passive sampler and interpretation service (SP3™) for the quantification of hydrophobic organic compounds, including PCBs and PAHs in pore water (sediment and soil), surface water and ...
-
Manufactured by EthicalChembased in USA
EthicalChem operates with a flexible business model providing chemical supply, technical support, full-scale remedial design, and/or implementation project management. Levels of support are based on client preference and site specific requirements. We provide our clients with cost effective approaches to achieve project goals. EthicalChem's products and technologies have been implemented at over ...
-
Manufactured by Eckel Industries Inc.based in USA
Eckel’s Acoustic Lay-in Panels (ALPs) provide an effective noise and reverberation solution specifically for rooms with lay-in ceilings. Unlike regular acoustic ceiling tiles, ALPs enable maximum noise reduction and sound absorption as their perforated and corrugated design combined with acoustic rated infill absorb considerably more sound at various frequencies than the more reflective ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you