Remediation Wells Equipment For Soil And Groundwater Available In Nunavut
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The compact service unit has been specially designed for very small SF6 gas quantities and is perfectly suited for applications such as SF6 gas handling on medical devices, electron microscopes or in research centres. The small and compact device includes all functions required for professional and emission-free SF6 gas handling: recovery down to 2 mbar, liquid storage in an external pressure ...
-
PremiumManufactured by CETCObased in USA
A liquid, LBA is certified by NSF International. LBA is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
We also deliver custom-tailored solutions for the SF6 gas handling of electron accelerators. Compared to the "normal" gas handling in the energy sector, larger SF6 gas volumes – usually several tons – have to be handled in the field of electron accelerators. Therefore, high-performance system components as well as large supply lines (up to DN 100) are needed, so that the gas volume ...
-
PremiumManufactured by CETCObased in USA
PUREGOLD CLEANDRILL is a bentonite free powder designed for special conditions associated with drilling horizontal directional recovery wells for groundwater remediation. PUREGOLD CLEANDRILL controls and helps maintain formation permeability and ...
-
Manufactured by Blackhawk Technology Companybased in USA
The Atlas 2.5 Pneumatic Piston Pump is Blackhawk’s most powerful pneumatic reciprocating piston pump. It is designed for difficult and heavy-duty applications, including hot and/or harsh environments, remediation, high discharge pressure, deep wells, angled or horizontal pumping, winter running and extended duty. At 11.0 gpm (41.6 lpm), Model 103 has the most powerful lift of the Atlas line ...
-
Manufactured by Cornelsen Umwelttechnologie GmbHbased in GERMANY
Soil vapour extraction systems can be used for a number of potential applications including: Volatilisation of residual NAPL within the soil matrix; Enhanced biodegradation of organics within the soil matrix by oxygenation; Vacuum Enhanced product recovery; Recovery of vapours from air sparging and/or steam ...
-
Manufactured by Pentair Filtration Solutions, LLCbased in USA
Hydrocarbon Streams are contaminated by soluble polar (or ionic) contamination in a variety of ways (viz., caustic treatment, amine treatment, acid catalysts etc). The contaminant typically exists within the hydrocarbon phase in a soluble form, and in some cases it may not even be ionized within the non-polar hydrocarbon. Nevertheless, it is generally necessary to remove these contaminants. In ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The Easy Fitting Quick-release Connectors is a new type of lower-cost, quick fitting for the AutoPump (Patent Pending), designed for severe duty downwell conditions at landfills and remediation sites. The Easy Fitting allows the AutoPump to be quickly disconnected from its tubing and hose sets, eliminating the need to cut the tubing. Constructed of high-quality, stainless steels the Easy Fitting ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AutoSkimmer Pump System automatically recovers LNAPL layers and pumps on demand when the pump is filled. Combining the industry-leading AutoPump with the rugged SPG floating inlet, the AutoSkimmer delivers higher LNAPL flows for wells with very high floating layer recovery rates. The system can then be switched to even higher flow, total fluids pumping by removing the floating inlet. When ...
-
Distributed by Geoquip Water Solutionsbased in UNITED KINGDOM
The ideal solution for critical service, non-compliant and limited access wells. Top-head-drive piston pumps are heavy duty pumps sited above the wellhead. The pumps provide continuous operation and can pump any liquid, in any environment, at any depth and at any angle, providing the ideal solution for critical service, non-compliant and limited access wells. Easy to service and repair, the pumps ...
-
based in USA
The Trident Automation System is a customized controls solution designed to manage the process variables of advanced liquid waste management. Based on specific input parameters provided by sensors and customized event action circuits, the controls ensure optimal performance of the system, even under changing conditions. ...
-
Manufactured by Franklin Electric Co., Inc.based in USA
The Franklin Electric Stainless Super 4-inch submersible motor has been the driving force behind residential and light commercial submersible pumps for decades. Designed and patented in 1950 by our founder, Ed Schaefer, this motor has proven to be the industry’s most trusted residential pump motor. Franklin offers a 4-inch submersible motor in a full line of single- and three-phase ...
-
Distributed by Oak Environmental Inc.based in CANADA
Oak Environmental's SHP (slim hole piston) pump is specially designed to meet the demands of sub-surface contaminant and contaminated groundwater extraction projects. The combination of rapid setup and low maintenance ensures efficient containment and recovery of sub-surface plumes. The SHP pump is cost effective with a proven track record on sites with chemical, oil, or gasoline ...
-
based in CANADA
The environmental benefits of recycling the fibre used in paper and cardboard manufacturing are well known: fewer trees are cut down, less water and energy are used and green-house gas emissions are reduced. In fact, most of us make use of these recycled materials on a daily basis, and the recovery chain is well established. 2M Ressources plays a key role in improving the paper and cardboard ...
-
Manufactured by Leakwisebased in ISRAEL
PS-220 Analog Leakwise Controller is a power supply and signal processor that interfaces with a single Leakwise ID-220 Series Sensor to report hydrocarbons spill/leak alerts, including layer buildup and thickness, to users via outputs for local or remote reporting. PS-220 has well-proven reliability and is cost-effective for a basic monitoring system. It can be AC or DC line ...
-
Manufactured by Carbtrol Corporationbased in USA
CARBTROL offers a complete line of proven, high quality equipment equipment wash water recycling and treatment systems for commercial, industrial, and military use. Our equipment wash water recycle systems are ideal for public works garages and highway equipment wash operations. Equipment wash water is reclaimed, treated and recycled, which conserves water and reduces or eliminates contaminant ...
-
Manufactured by Scientific Specialties, Inc. (SSIbio)based in USA
Citadel Deep-Well Plates are ideal for high-throughput screening processes and long-term storage. It all begins with high-clarity, ultra-pure polypropylene, combined with proprietary injection molding techniques to produce high-clarity vessels that are exceptionally robust, chemically-resistant, and ...
-
based in UNITED KINGDOM
In-situ bioremediation is the remediation of soils and/or groundwater utilising the indigenous naturally occurring microorganisms in order to biologically degrade contaminants. The development of the microbial culture within the remediation zone can be with oxygen, (aerobic or oxidising) or without oxygen (anaerobic or anoxic). This is dependant on the nature of the contaminants that require ...
-
Manufactured by IEG Technologie GmbHbased in GERMANY
The remediation of a chlorinated hydrocarbons (CHC) contaminated aquifer always contains a risk, because of the possibility of uncontrolled downwards mobilization of the CHC into deeper parts of the aquifer. This scenario would be even more harmful to the environment. The application of well known remediation techniques for CHC as e. g. pump-and-treat is not useful because of its extremely long ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Genie skimmers are safe, reliable and complete systems for removing floating LNAPL layers from wells. The SPG and SOS Programmable Genie skimmers are air-operated selective LNAPL removal systems with a high suction pump and a floating inlet designed to follow the LNAPL layer as the ground water level fluctuates. The SPG version uses a specific gravity float and the SOS version uses a hydrophobic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you