Remote Controlled Dredging Equipment For Soil And Groundwater Available In Latin America
-
PremiumManufactured by Dragflow S.r.l.based in ITALY
The DRP60 is a remote-controlled dredge equipped with a dredge pump with a discharge diameter of up to 150 mm (6 inches). This dredge is designed to tackle the most challenging conditions in ports, quarries, mines, and industrial docks, offering operator safety and unrivaled ...
-
PremiumManufactured by Dragflow S.r.l.based in ITALY
The DRP120 is a remote-controlled dredge equipped with a dredge pump with a discharge diameter of up to 250 mm (10 inches). This dredge is designed to tackle the most challenging conditions in ports, quarries, mines, and industrial docks, offering operator safety and unrivaled ...
-
PremiumManufactured by SRS Crisafulli, Inc.based in USA
The FLUMP (floating lagoon pumper) solves industrial and municipal environmental problems in a low-cost, efficient manner. The FLUMP removes settled wastes and other by-products from settling ponds or lagoons, built to prevent wastes from leaching into the ...
-
PremiumManufactured by Dragflow S.r.l.based in ITALY
The DRP150 is a remote-controlled dredge equipped with a dredge pump with a discharge diameter of up to 300 mm (12 inches). This dredge is designed to tackle the most challenging conditions in ports, quarries, mines, and industrial docks, offering operator safety and unrivaled ...
-
PremiumManufactured by SRS Crisafulli, Inc.based in USA
The RDF is a perfect dredge for when you don't have access to adequate power to run an electric FLUMP, and want to operate the dredge remotely. The RDF solves industrial and municipal environmental problem in a low-cost, efficient manner. The RDF removes settled wastes and other by-products that no longer may be scattered over the countryside, but, instead, must be contained in settling ponds or ...
-
PremiumManufactured by Dragflow S.r.l.based in ITALY
The DRP18 is a remote-controlled dredge equipped with a dredge pump with a discharge diameter of up to 100 mm (4 inches). This dredge is designed to tackle the most challenging conditions in ports, quarries, mines, and industrial docks, offering operator safety and unrivaled ...
-
Manufactured by Dragflow North Americabased in CANADA
The DRP dredge is a portable, cable dredge based on submersible pump. Configured as a remote control dredge, the DRP becomes an automated system reducing the cost of operation while improving ...
-
Manufactured by Vortex International Limitedbased in NEW ZEALAND
The VORTEX 2 1/2 inch dredging system carries the same patent pending technology as our larger range of dredges making this the most powerful 2.5" inch ROV and diver dredge in the world. Operator safety has been considered with use of large, yellow name tags on all high pressure fittings and minimal component weightand comprehensive manuals. Our environmental concerns are addressed through high ...
-
Manufactured by VVV-Spetstekhnikabased in UKRAINE
Dimensions in working position: maximum length 20 m, maximum width 4.4 m, maximum height 2.8 m, board height 1 m, draft 0.65 m . Weight: 7 t. The hydraulic dredger is equipped with an arrow. Suction pipe length is 17 m with hydraulic washing-out (jet), with pump capacity 11 kW, the water supply is 70 m3 per hour with hydraulic drop of 85 ...
-
Manufactured by Vortex International Limitedbased in NEW ZEALAND
New to the market, the VORTEX EASYDREDGE has been developed with direct input from several key customers and has been designed to simplify and maximize diver bottom time by allowing the diver to grab the suction nozzle, pull the pre-installed hose off the rack and begin ...
-
Manufactured by Vortex International Limitedbased in NEW ZEALAND
General specification: 2 ½” dredge Motor. 3ph 2 pole star wound Squirrel cage motor. 660V 60hz. Output 5kW. Full load current – 6.2 amps. Forced cooling oil circulation. External compensator. 49kg in air. ...
-
Manufactured by VVV-Spetstekhnikabased in UKRAINE
Dimensions in working position: maximum length 12 m, maximum width 4.4 m, maximum height 2.8 m, board height 1.0 m, draft 0.65 m . Weight: 7.5 t. The hydraulic dredger is equipped with an arrow. Suction pipe length is 7 m with cutter ripper, power 10 kW, frequency 30 rev/min, hydraulic drive. Power unit: electrical, power 85 kW, 1500 rev /min, 380 W) or ...
-
Manufactured by Zeta Crezen Co., Ltd.based in SOUTH KOREA
FEATURE: Triangular chassis with 130mm rubber track. Big ground clearance. Auger with swing & tilting motion. Auger with Ø100 discharge. Standing spin. Mobile controller with joystick. Built-in front HD resolution camera. LED light. Separated ...
-
Manufactured by Vortex International Limitedbased in NEW ZEALAND
The VORTEX 3-inch carries the same patent pending technology as our 4-inch range of dredges making this the most powerful 3-inch ROV and diver dredge in the world. Smaller ROV not previously able to bid on work with dredge, now have a variety of dredge ...
-
Manufactured by VVV-Spetstekhnikabased in UKRAINE
Dimensions in working position: maximum length 12 m, maximum width 4.4 m, maximum height 2.8 m, board height 1 m, draft 0.65 m . Weight: 6.5 t. The hydraulic dredger is equipped with an arrow. Suction pipe length is 7 m with hydraulic washing-out (jet), with pump capacity 11 kW, the water supply is 65 m3 per hour with hydraulic drop of 80 ...
-
Manufactured by VVV-Spetstekhnikabased in UKRAINE
Dimensions in working position: maximum length 12 m, maximum width 4.4 m, maximum height 2.8 m, board height 1.0 m, draft 0.55 m . Weight: 6.0 ...
-
Manufactured by Scanmudring ASbased in NORWAY
The ROV Dredge system is an advanced add-on dredging kit that can be used on most common Work Class ROVs. The system is assembled, operated, maintained offshore and dismounted by the customer’s ...
-
Manufactured by VVV-Spetstekhnikabased in UKRAINE
Dimensions in working position: maximum length 12 m, maximum width 4.4 m, maximum height 2.8 m, board height 1 m, draft 0.55 m . Weight: 6.5 ...
-
Manufactured by VVV-Spetstekhnikabased in UKRAINE
Dimensions in working position: maximum length 20 m, maximum width 4.4 m, maximum height 2.8 m, board height 1 m, draft 0.65 m . Weight: 7 t. The hydraulic dredger is equipped with an arrow. Suction pipe length is 17 m with hydraulic washing-out (jet), with pump capacity 11 kW, the water supply is 70 m3 per hour with hydraulic drop of 85 ...
-
Manufactured by VVV-Spetstekhnikabased in UKRAINE
Dimensions in working position: maximum length 12 m, maximum width 4.4 m, maximum height 2.8 m, board height 1.0 m, draft 0.65 m . Weight: 7.5 t. The hydraulic dredger is equipped with an arrow. Suction pipe length is 7 m with cutter ripper, power 10 kW, frequency 30 rev/min, hydraulic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you