Rock Testing Services For Soil And Groundwater Available In Austria
-
PremiumManufactured by Vista Clara, Incbased in USA
In addition to offering the industry-leading Helios Core & Soil Analyzer for sale or rental, Vista Clara also provides a service to our customers by processing your samples in our laboratory. This service uses Helios systems at our headquarters facility to enable measurement of a wide range of soil and core samples, with diameters up to 4 inches, and with a unique combination of short echo ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
Solexperts collaborates with national and international organisations in radioactive waste repository research. These include NAGRA, ENSI, Swisstopo, PSI, EAWAG, ETHZ, EPFL and CHYN (Switzerland), ANDRA, CEA and IRSN (France), BfS, BGR, GRS, DBE, RWTH and KTI (Germany), ENRESA (Spain), SCK-CEN and ONDRAF (Belgium), CRIEPI, JAEA, NUMO (Japan), KRMC/KAERI (Korea) and BRIUG (China). Repository ...
-
by GeoServbased in IRELAND
GeoServ are equipped to conduct professional thermal conductivity measurements on a wide variety of materials. We utilise the steady state method with a custom engineered Divided Bar setup this is the most practical method for testing rock core samples in the laboratory. We also employ the transient heat method with the use of a thermal probe, this test method is applicable for both undisturbed ...
-
by Fugrobased in NETHERLANDS
For nearshore projects, our marine plant and equipment enables Fugro to offer a range of drilling, testing and installation work in a safe and efficient manner. Capable of operating from high water level to water depths of around 40 metres, our jack-up platforms can be mobilised to almost any coastal ...
-
based in USA
Advanced Terra Testing's (ATT) Geosynthetics testing services were introduced to complement the soils and rock testing services provided by ATT in response to a clear demand by many of the firm's clients. ATT utilizes state of the art techniques and equipment in the testing process applying the most current American Society for Testing and Materials (ASTM), Federal Test Method Standards (FTMS), ...
-
Manufactured by Stratum Reservoirbased in USA
Rock and fluid samples provide a direct link to your reservoir or source rock. With decades of skill and expertise spread across the globe, our laboratory services play a pivotal role in reservoir completion strategies. With production success increasingly dependent on what is known about a reservoir, laboratory analyses help quantify the unknown and reduce risk. The result is better wells with ...
-
by Fugrobased in NETHERLANDS
As the largest global supplier of marine geotechnical site investigation services, Fugro conducts tailored investigations in all offshore regions of the world. From shallow continental environments to the newer remote ultra-deepwater plays, we deploy our dedicated drillships and robotic drilling equipment to provide you with seabed soil investigations in water depths down to 3,000 ...
-
based in UNITED KINGDOM
As a RISQS qualified supplier Dunelm can provide PTS qualified staff to undertake the ...
-
by GD TEST srlbased in ITALY
Rock mechanics laboratory is certified by the italian ministry of infrastructure and transport. Geomecanical and geotechnical characterisation. Tests for mechanised excavation. Tests for natural stone for use in ...
-
based in ISRAEL
Geo-Prospect Ltd. is involved in locating deposits of raw materials such as dolomite, limestone, clay, basalt, quartz, sand, flagstone, salt and different metal ores in Israel and around the world. Geo-Prospect Ltd. works regularly with most of the quarries in Israel. We have a geo-technical lab for testing rock quality and suitability to the Israeli standards. The company oversees the projects ...
-
based in USA
Sand production and the sand control technique selected to mitigate or eliminate it, can have a critical influence on the operation of oil and gas wells. A well completion that provides adequate sand control is usually required, but an overly conservative design can have an unnecessary, negative consequence on well productivity or ...
-
based in CANADA
WE PROVIDE LABORATORY TESTING SERVICES WITH PRECISE MEASUREMENTS, PROMPT TURNAROUND TIMES, AND INDUSTRY-LEADING REPORTING AND DIGITAL DATA. The design and analyses of any rock engineering project requires careful mechanical characterization of the host rock. For this purpose, rock cores are drilled on-site and rock samples are prepared for laboratory testing. These samples then go through various ...
-
based in USA
Zonge is a full-service resource providing professional geophysical services to project managers, engineers, and consultants at exploration companies, government agencies, engineering firms, design-to-build contractors and other ...
-
based in USA
Obtaining accurate rock mass strengths requires an understanding of the intact rock and joint properties of each geotechnical unit and the in-situ stress state. To estimate rock mass strengths, Itasca uses the full gamut of engineering approaches, including analytical, empirical, and numerical modeling approaches. ...
-
based in USA
Advanced Terra Testing's Rock Mechanics division is responsible for performing a wide range of tests under varying conditions and test parameters. Over the past eighteen years, tests have been performed on projects for over 100 clients world wide, ranging from North Sea oil wells, to rock fill dams in Peru, to coal mines in Colorado, to dams in Virginia, to landslides in Utah and Wyoming, to gold ...
-
based in UNITED KINGDOM
Dunelm have their own in-house geotechnical laboratory facility allowing a quick turnaround for test results. The laboratory is equipped with a range of equipment to carry out the following tests specified to BS1377:1990 “Methods of Tests for Soils for Engineering ...
-
Manufactured by Cascade Drillingbased in USA
Cascade Drilling, L.P. serves the mineral exploration and mine development markets. We operate Sonic, Air Rotary, Top Drive Hammer, Under Reamer and Reverse Circulation, Rock Coring and Mud Rotary drilling. Our customers can expect a consistent, safe and professional service at any ...
-
Manufactured by Cascade Drillingbased in USA
Sonic technology is ideal for both deep and shallow drilling applications where undisturbed core sampling through almost any type of geological formation is required. This powerful technology provides many advantages over other types of drilling techniques. It is a low-impact technology that is safer by minimizing crew tool handling. By rotating and vibrating the rod, core barrel, and casing at ...
-
by Fugrobased in NETHERLANDS
A wide range of engineering services means that we can respond professionally to your geotechnical engineering requirements, both onshore and nearshore. Using advanced exploration tools, field and laboratory testing and analytical/computer methods we identify, evaluate and resolve geotechnical design challenges. We specialise in challenging projects and some of our most complicated assignments ...
-
based in SAUDI ARABIA
Technology Experts Labs offer distinguished services in the fields of Radiation and Chemical analysis for different kinds of samples. Our labs are equipped with advanced instruments and devices to perform the required tests from well known International Companies such as: Canberra Industries Inc, (USA) which is specialized in production and manufacture of Nuclear Electronics and Radiation ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you