Sediment Control Applications available in Pakistan
-
Premium
Determination of water-soluble forms of inorganic cations in soils, clays, peat, wastewater silt, activated sludge, and bottom sediments
Introduction The content of water-soluble forms of inorganic cations (ammonium, potassium, calcium, sodium, magnesium) is one of the substantial characteristics in agrochemical, land reclamation, and sanitary assessments of soils (arable, hayland, pasturable, forest nursery soils). The cation balance should be controlled during ecological soil monitoring for the human activity impact ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Water treatment solutions for the oil & gas industry
Production of oil and gas is usually accompanied by the usage and production of large volumes of water in several applications. The industry recognizes its dependency on water and is focused on minimizing its use, enhancing reuse and recycling opportunities, and improving treatment technologies and disposal options. Lenntech provides sustainable complete solutions for water and waste water treatment in oil and gas industry considering a wide range of technologies and ...
By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.
-
Premium
Weda underwater cleaning robots in lagoons and large fountains
The new Weda YT-5000 with a five (5) meter wide suction nozzler speeds up the cleaning process considerably. Estimated cleaning speed is up to 3000 sq. meters/hour. The cleaner removes efficiently bottom sedimentation (sand, algae etc.) from the bottom surface and pumps it to a selected discharge point (filter, waste ...
By Weda AB based in Sodertalje, SWEDEN.
-
Premium
Contactless Flow Measurement solutions for Wastewater Treatment Plant - Intake Area
Application: Concrete channel, width 1.2 m. Part filled. Measurement point upstream of screen and grit trap. High sedimentation ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Water treatment solutions for the mining & metallurgy industry
Contaminated mine water is generated when rock containing sulphidic minerals is exposed to water and oxygen, resulting in the production of acidity and high concentrations of metals and sulphate in the water. Mine drainage, process water and storm water associated with industrial activities are the main types of water produced in mining operation. The two primary aims of the treatment of contaminated mine water are to neutralize acidity and removal metals. Lenntech provides sustainable complete water treatment ...
By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.
-
Premium
Determination of water-soluble forms of inorganic and organic anions in soils, clays, peat, wastewater silt, activated sludge, and bottom sediments
Introduction The content of water-soluble forms of inorganic (chlorides, sulfates, nitrates, fluorides and phosphates) and organic (acetates, formates, and oxalates) anions is one of the substantial characteristics in agrochemical, land reclamation, and sanitary assessments of soils (arable, hayland, pastur able, forest nursery soils). These data are also important in investigation of the behavior of the soil processes, study of nutrient metabolism, and detection of salts harmful to plants. The anion balance ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Erosion and dust control solutions for construction industry
Envirotac line of polymers are commonly used on construction sites to control dust and reduce water. When an area has been mass graded contractors will use Envirotac to treat the disturbed areas as opposed to constantly watering them. One application of an Envirotac will last years and cost nearly one penny per square ...
By Environmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA).
-
Premium
Real-time turbidity and total suspended solids sensors solutions for agriculture industry
Phathom sensors can be used in a wide range of agricultural settings, including horticulture, livestock farming and crop farming. Applications include monitoring turbidity and suspended solids in wastewater and service water at influent and discharge, and monitoring stormwater sediment ...
By Phathom based in Pukekohe, NEW ZEALAND.
-
Premium
Flowing Waters - Irrigation & Drainage Systems solutions for Sludge Level Measurement Groundwater Treatment
Application: Multi-stage container plant. Chamber size 2.4 x 2.9 x 12.2 m (w x h x d). Aerated, limed groundwater with approx. 80 mg/l iron ochre contents. Built-in lamella ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Water Data Management Solution for Alpine Monitoring
KISTERS has developed a specific version of WISKI with unique benefits for those monitoring Alpine Regions. Some of its advanced features include specialized calculations for measuring precipitation, snow, sediment transport and water balances in ...
By KISTERS based in Aachen, GERMANY.
-
Premium
Environmental technology solution for sediment remediation sector
Providing solutions for all types of Sediment Remediation projects. Many factors go into the decision for a remedial design of contaminated sediments. CETCO can assist engineers with design evaluations and provide technical assistance with modeling cap life or potential stabilization or solidification mix designs. Regardless of the remedy, our technical team is able to ...
By CETCO based in New York, NEW YORK (USA).
-
Premium
Drinking water solutions for the coagulation optimization - TOC, UV254
Problem: Drinking water plants that use surface water or ground water under the influence of surface water are susceptible to high levels of organic matter in the raw water. Reduction of organic matter through coagulation/sedimentation and filtration is important to lower the potential for disinfection by-product formation (DBP) and limit operational problems. In addition, organics in water consume the polymers used for the coagulation process, which reduces the efficiency of the treatment. Therefore, optimization ...
By Real Tech Inc. based in Whitby, ONTARIO (CANADA).
-
Premium
Real-time turbidity and total suspended solids sensors solutions for construction industry
Phathom sensors can be deployed on construction sites to help manage sediment and erosion control. Applications include monitoring sediment retention ponds, use in dewatering systems in combination with silt busters, clarifiers, flocculant dosing, and other equipment, and stormwater ...
By Phathom based in Pukekohe, NEW ZEALAND.
-
Premium
Plastic Film Washing And Pelletized Line
Enerpat plastic film washing line is suitable for all kinds of films and woven bags with high toughness and thickness of about 1 to 25 mm. The production line covers: Conveyor, crusher, friction washing machine, separation sedimentation tank, extruder, ...
By Enerpat Group based in Nantong, CHINA.
-
Premium
Erosion and dust control solutions for erosion control sector
Our Envirotac line of erosion control polymers works great to protect slopes and embankments from Erosion. Envirotac being an acrylic polymer will penetrate the earth soil and upon curing will bond the soil particles together. This will "laminate" the area reducing water and wind penetration keeping soil sediment in place. Unlike mulch applications, it will not sheet off but will stay adhered to the soil. Also it will not harm vegetation and in many instances will increase germination ...
By Environmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA).
-
Premium
Chemical Water Treatment for membrane treatments
Membrane units, in our days are widely used in the water pre-treatment preparation and are becoming one of the most important technologies in the production of high pure water. Nevertheless they often face problems with scaling and fouling and are therefore limited by frequent maintenance, downtime and high costs. Our treatment programs are specifically designed for membrane units like reverse osmosis, ultra- and nanofiltration and enable to remove or preventive control scaling and fouling. Our main target is to ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Determination of mercury in soil, bottom sediments, and geological materials
Introduction Analysis of soils and bottom sediments for mercury content is one of the most common analyses in the monitoring of environmental pollution. Background mercury concentrations in these objects are 10–100 μg/kg and in the polluted areas they exceed 10,000 ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Water treatment solutions for pulp & paper industry
The Pulp & paper industry is characterized by high operational water usage. Rising water costs due to increasing water scarcity and more stringent environmental regulations have led pulp and paper companies to seek innovative and efficient water treatment solutions to assist them to reduce their water footprint, decrease operational cost and maintain regulatory compliance. Therefore, water quality management and conservation through the utilization of an advanced pulp and paper water treatment system is ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Erosion control solutions for scour protection sector
North American Green’s Erosion Control Systems have proven solutions for your scour protection needs. Pipe outlets, channel bottoms and shoreline transition areas all present unique scour protection and soil stabilization challenges. That is why project designers prefer the aesthetics and safety offered by our flexible revetment mats - especially our ShoreMax Transition ...
By North American Green based in Poseyville, INDIANA (USA).
-
Water quality solutions for nitrification areas
The Fast Response Early Boost (FREB) strategy has provided effective control in chloraminated potable water tanks during warm months when these problems are most ...
By Ixom Watercare based in Dickinson, NORTH DAKOTA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you