Sediment Sampler (Sediment Control) Equipment Available In Vanuatu
-
PremiumManufactured by AMS, Inc.based in USA
Stops caving sediment! Use this manually-driven sampler for discrete interval sediment sampling in rivers, lakes, wetlands, and estuaries. To obtain a sample, the sampler is lowered to the surface as a dual tube or driven down to the desired depth where sampling is to begin below the surface. Upon reaching the desired sampling ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Suspended load sampler, Delft bottle type, standard set for sampling particles larger than 50 mu. Applicable in velocities till 2.5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The sampler ‘Watertrap’ has been designed to take representative samples from running water up to a depth of approx. 25 meter. Samples are taken with the stainless steel device by catching part of a horizontal moving column at a certain moment at a certain ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Suspended load sampler, Delft bottle type, inclusive accessories and spare ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sampler for suspended sediment, type "Watertrap". Standard set for sampling to a depth of 25 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Bed-load transport meter frame with stabilising tail fin and ...
-
Manufactured by KC-Denmark A/Sbased in DENMARK
Application: Sampler for collecting bottom sediments for biological, hydrological and environmental ...
-
Manufactured by Halltech Environmental and Aquatic Research Inc.based in CANADA
Sediment samplers, depth integrating, point integrating or bed material samplers are available through Halltech in either rod suspended or cable suspended systems. Some sediment samplers may require power to actuate a valve or gate to allow entry of sediment through the entry tube and into the ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS offers a variety of dredges designed for sampling sand and silt as well as most types of non-cohesive material. AMS sampling dredges are placed onto the bottom sediment, then closed and pulled up to retrieve a sample. Careful release of the sample distributes the sample approximately as it appeared on the bottom – making sediment ...
-
Manufactured by Qingdao Watertools Technology Co., Ltd.based in CHINA
The Bottom Sampler acc. to Ekman-Birge is a quantitative sampler with precise sampling area to achieve nearly undisturbed samples in soft grounds. It consists of a sturdy-walled metal cabinet equipped with two spring-loaded jaws which are released by a messenger. Two light plates cover the top opening of the sampler to prevent the sample ...
-
Manufactured by Qingdao Watertools Technology Co., Ltd.based in CHINA
The Bottom Sampler acc. to Van Veen is a qualitative sampler to achieve low-disturbed sediment samples in soft or medium hard grounds from any desired depth. It consists of two clamshell jaws connected by a hinge. During descent both levers are locked wide apart and the jaws are open. Upon touching the water bed the locking mechanism is ...
-
Manufactured by Kisters AGbased in GERMANY
The lightweight hand sampler DH48 is used for the collection of suspended sediment samples by wading rod suspension. The easy-to-use sampler consists of an epoxy coated, streamlined aluminium casting (weighing approx. 2 kg), which partially encloses the sample container. An intake nozzle extends horizontally from the nose of the ...
-
Manufactured by Kisters AGbased in GERMANY
DH59 is an easy-to-use medium-weight suspended sediment sampler. The sampler consists of an epoxy coated, streamlined bronze casting weighing approx. 10 kg, which partially encloses the sample container. It is equipped with a tail vane assembly to orient the intake nozzle into the approaching flow as the sampler enters the water. ...
-
Manufactured by HyQuest Solutionsbased in GERMANY
The lightweight hand sampler DH48 is used for the collection of suspended sediment samples by wading rod ...
-
Manufactured by Lindorm, Inc.based in USA
The Nilsson sampler, also known as the Uppsala or Swedish sampler, is a vertically integrating water sampler for suspended sediment ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This sampler is used to measure bed-load of coarse sand and fine gravel in rivers and other water- ...
-
Manufactured by Kaizen Imperialbased in INDIA
This is the most common type of suspended sediment Sampier(Punjab Type), Offered Sediment Silt Sampler is made to take the samples of silt in order to determine several parameters of that form of soil. This sampler is made out of optimum quality metal which provides high bearing strength to this bottle shaped instrument.. The ...
-
PremiumManufactured by AMS, Inc.based in USA
The Russian Peat Borer is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling while the pivotal cover plate ...
-
PremiumManufactured by AMS, Inc.based in USA
The Russian Peat Borer (7.5 cm x 60cm model shown) is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily collect sludge samples from the bottom of petroleum tanks with this unique & user friendly sampling kit. Based on the popular design of the ‘AMS Multi-Stage Sediment Sampling Kit’, the components in this kit are similar, only they are made from lightweight aluminum. This proves to be crucial, as often times tanks can be ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you