Sediment Sampler (Sediment Control) Equipment In Europe
-
PremiumManufactured by KISTERSbased in GERMANY
DH59 is an easy-to-use medium-weight suspended sediment sampler. The sampler consists of an epoxy coated, streamlined bronze casting weighing approx. 10 kg, which partially encloses the sample container. It is equipped with a tail vane assembly to orient the intake nozzle into the approaching flow as the sampler enters the water. ...
-
PremiumManufactured by AMS, Inc.based in USA
Stops caving sediment! Use this manually-driven sampler for discrete interval sediment sampling in rivers, lakes, wetlands, and estuaries. To obtain a sample, the sampler is lowered to the surface as a dual tube or driven down to the desired depth where sampling is to begin below the surface. Upon reaching the desired sampling ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Suspended load sampler, Delft bottle type, standard set for sampling particles larger than 50 mu. Applicable in velocities till 2.5 ...
-
PremiumManufactured by KISTERSbased in GERMANY
The lightweight hand sampler DH48 is used for the collection of suspended sediment samples by wading rod suspension. The easy-to-use sampler consists of an epoxy coated, streamlined aluminium casting (weighing approx. 2 kg), which partially encloses the sample container. An intake nozzle extends horizontally from the nose of the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sampler for suspended sediment, type "Watertrap". Standard set for sampling to a depth of 25 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This sampler is used to measure bed-load of coarse sand and fine gravel in rivers and other water- ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The sampler ‘Watertrap’ has been designed to take representative samples from running water up to a depth of approx. 25 meter. Samples are taken with the stainless steel device by catching part of a horizontal moving column at a certain moment at a certain ...
-
Manufactured by KC-Denmark A/Sbased in DENMARK
Application: Sampler for collecting bottom sediments for biological, hydrological and environmental ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS offers a variety of dredges designed for sampling sand and silt as well as most types of non-cohesive material. AMS sampling dredges are placed onto the bottom sediment, then closed and pulled up to retrieve a sample. Careful release of the sample distributes the sample approximately as it appeared on the bottom – making sediment ...
-
Manufactured by HyQuest Solutionsbased in GERMANY
The lightweight hand sampler DH48 is used for the collection of suspended sediment samples by wading rod ...
-
Manufactured by Lindorm, Inc.based in USA
The Nilsson sampler, also known as the Uppsala or Swedish sampler, is a vertically integrating water sampler for suspended sediment ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily collect sludge samples from the bottom of petroleum tanks with this unique & user friendly sampling kit. Based on the popular design of the ‘AMS Multi-Stage Sediment Sampling Kit’, the components in this kit are similar, only they are made from lightweight aluminum. This proves to be crucial, as often times tanks can be ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Bed-load transport meter frame with stabilising tail fin and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Suspended load sampler, Delft bottle type, inclusive accessories and spare ...
-
PremiumManufactured by AMS, Inc.based in USA
The Russian Peat Borer is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling while the pivotal cover plate ...
-
PremiumManufactured by AMS, Inc.based in USA
The Russian Peat Borer (7.5 cm x 60cm model shown) is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you