Sediment Control Equipment For Soil And Groundwater Near Australasia
-
based in AUSTRALIA
For control of sediment movement from building sites, Landloch supplies two separate options for the flocculation of suspended sediment in sedimentation ponds. Developed from work with Sunshine Coast Regional Council and using recent New Zealand advances, rainfall activated dosing systems available from Landloch include: Eco-doser unit using direct displacement, suited to smaller catchment areas ...
-
Manufactured by KC-Denmark A/Sbased in DENMARK
Application: Battery box 100.217 rated for 6000 m depth. With room for programmable timer (USB or RS-485 interface) and pressure transmitter (optional) which can be used for Niskin rosette racks, sediment trap stations, plankton pumps, small multi water sampler station and lander ...
-
Manufactured by KC-Denmark A/Sbased in DENMARK
General: The construction of the sediment trap array ensures a permantly vertical position of the sampling tubes during deployment. The steering fin (optional) and the pivot joints force the array to be held at right angle to the ...
-
Manufactured by KC-Denmark A/Sbased in DENMARK
Application: Sediment sampling with time lapsed ...
-
Manufactured by KC-Denmark A/Sbased in DENMARK
Application: Sampler for collecting bottom sediments for biological, hydrological and environmental ...
-
Manufactured by KC-Denmark A/Sbased in DENMARK
General: The construction of the sediment trap array ensures a permantly vertical position of the sampling tubes during deployment. The steering fin (optional) and the pivot joints force the array to be held at right angle to the ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
Sub-bottom profiling applications in diverse sediments in shallow water environments require compact tools as well as multiple frequency bands to support a variety of survey requirements. The HMS-621 CHIRPceiver LittTM and transducer arrays fill this wide range of survey needs. The user selectable frequency bands supported by the HMS-621 include standard LF (1KHz-10KHz), or HF (8KHz-23KHz). It ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
Sub-bottom profiling applications in diverse sediments require multiple frequency bands to support a wide variety of survey requirements. The HMS-622 CHIRPceiverTM and its Family of Transducer Arrays and Vehicles can fill this wide range of survey needs. The frequency bands supported by the HMS-622 include standard LF (1KHz- 10KHz), and optional ULF (200Hz-2KHz) and HF (8KHz- 23KHz). It can be ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620 Bubble GunIM systems use low-frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620 ORD Bubble Gun systems use low-frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620LF Bubble Gun uses Low-Frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate sediments. Low power requirements and small sub-system component size make this a valuable tool for any survey ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
Deep water sub-bottom profiling applications (1Km to 12Km) require an array of 4 to 36 low frequency transducers installed in a hull-mounted sea chest. The HMS-12KM system with the HMS-622 CHIRPceiverTM and hull mounted transducer arrays fills this range of survey requirements. The frequency bands supported by the HMS- 12KM include LF (1KHz-10KHz) and HF (8KHz-23KHz) with a standard 2 channel ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sampler for suspended sediment, type "Watertrap". Standard set for sampling to a depth of 25 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Suspended load sampler, Delft bottle type, standard set for sampling particles larger than 50 mu. Applicable in velocities till 2.5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Suspended load sampler, Delft bottle type, inclusive accessories and spare ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This sampler is used to measure bed-load of coarse sand and fine gravel in rivers and other water- ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Bed-load transport meter frame with stabilising tail fin and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The sampler ‘Watertrap’ has been designed to take representative samples from running water up to a depth of approx. 25 meter. Samples are taken with the stainless steel device by catching part of a horizontal moving column at a certain moment at a certain ...
-
Manufactured by UV-Guard Australia Pty Ltdbased in AUSTRALIA
UV Guard's CWP-Series purifies water to allow it to be safely consumed or used throughout your home or commercial facility. The unit delivers complete water treatment in 3 stages - filtration, adsorption and UV disinfection - to remove sediment, bacteria and other pathogens while improving taste, clarity and odour. Suitable for rainwater bore water and townwater ...
-
Manufactured by Chatoyer Environmental Pty Ltdbased in AUSTRALIA
We’ve fabricated floating turbidity curtains for extreme environments like open ocean, tropical tidal ranges, high velocity winds and fast flowing rivers. We’ve used special materials for acidic tailings dams. We’ve made curtains 20m deep. We’ll advise on anchoring. We are very familiar with the waterways around Australia. Our use of high-quality materials, attention to detail and workmanship ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you