Sediment Modeling Equipment For Soil And Groundwater Available In New Jersey
-
Distributed by BASCO, Incbased in USA
Stop silt, sediment, and other debris from entering curb inlets and catch basins. For use with combination catch basins with a street grate and curb opening. Heavy-duty tension rod secures DrainGuard inside curb inlet, stopping sediment and other contaminants from entering curb portion of storm drain. Fits grate sizes up to 40"" x 40"" and curb inlets up to 60"" wide. The Oil & Sediment Plus ...
-
Manufactured by GEI Works, LLCbased in USA
This stormwater drain guard functions as a catch basin that can be inserted into a storm drain to block sediments and other pollutants from entering a water ...
-
Manufactured by GEI Works, LLCbased in USA
Need storm drain covers that are strong and effective? These inlet guards from UltraTech are manufactured with reinforced materials that can withstand large flows of ...
-
Manufactured by Halltech Environmental and Aquatic Research Inc.based in CANADA
Sediment samplers, depth integrating, point integrating or bed material samplers are available through Halltech in either rod suspended or cable suspended systems. Some sediment samplers may require power to actuate a valve or gate to allow entry of sediment through the entry tube and into the sampler ...
-
Manufactured by Ultra Tech International, Inc.based in USA
The Ultra-Drain Guard is engineered to filter stormwater waste before it becomes a problem in the water system. As a storm drain filter, it removes contaminants like litter, sand, and oil from stormwater flow. It’s geotextile fabric and easy installation makes it ideal for industrial facilities, construction sites, and parking lots where stormwater runoff is likely to carry oil, eroded ...
-
Manufactured by Ocean Imaging Systems, A Division of EP Oceanographic, LLCbased in USA
The Ocean Imaging System (OIS) Sediment Profiling Camera has evolved from the original Model 3731 sediment camera designed at Benthos in the early 1980’s with a 4000 meter depth rating. The original camera was developed in cooperation with Dr. Donald Rhoads and Dr. Joseph Germano who pioneered Sediment Profile Imaging (SPI) at Yale ...
-
Manufactured by Quatrex Environnement Inc.based in CANADA
Keeps sediment and other polluant from entering the water system with ultra-drain guard catch basin ...
-
Manufactured by Marine Systems Technology, Inc.based in USA
The Ocean Imaging System (OIS) Sediment Profiling Camera has evolved from the original Model 3731 sediment camera designed at Benthos in the early 1980’s with a 4000 meter depth rating. The original camera was developed in cooperation with Dr. Donald Rhoads and Dr. Joseph Germano who pioneered Sediment Profile Imaging (SPI) at Yale University. The original Benthos design used a 35mm film ...
-
Manufactured by MySpring Co.based in GREECE
The RO-475 is the best choice of a professional reverse osmosis system where the feed water has conductivity up to 2.500 μS and the need of daily production is 1500 ...
-
based in USA
Sub-bottom profiling systems identify and measure various marine sediment layers that exist below the sediment/water interface. A sound source emits an acoustic signal vertically downwards into the water and a receiver monitors the return signal that has been reflected off the seafloor. Other portions of the acoustic signal will penetrate through the seabed and be subsequently reflected as they ...
-
by Partrac Ltdbased in UNITED KINGDOM
We operate two benthic flumes for the in situ measurement of sediment stability - these are seabed lander systems designed for coastal and offshore use. The flumes are submersible marine instruments which rest unattended on the seabed and apply a controlled flow across the seabed. Sensors are used to measure seabed erosion as it occurs, typically over a 1 to 2 hour experiment time. Data on the ...
-
Manufactured by Synthetex, LLC.based in USA
Synthetex installs fabric formed concrete supports, mattresses, covers, sleeves and shells to prevent pipeline damage and scour, and support pipeline freespans. Jack-up supports can be used to raise a pipeline or structure. The flexible, high-strength synthetic woven fabric bags are cost effective to make and are easy to deploy by an ROV or ...
-
Manufactured by Ultra Tech International, Inc.based in USA
The ultimate in catch basin inserts removes dirt, sediment, hydrocarbons, and utilizes an effective antimicrobial coating. Same hydrocarbon and sediment removal capabilities as the Ultra-Drain Guard, Oil & Sediment Plus Model but with additional antimicrobial properties. 1.5” x 20” strips of Ultra-X-Tex AM (Antimicrobial) hang from the bottom of the Drain Guard and become immersed ...
-
by Gybe Inc.based in USA
Our product algorithms combine data from Gybe's ground sensors with remote sensing imagery, and gives you the real time data you need to make management decisions and improve water stewardship. We make it easy for you to continuously monitor the quality of water including harmful algae blooms, turbidity, sediments, without ever needing to leave the ...
-
Manufactured by Terrapin Waterbased in CANADA
In partnership with Milne Technologies we can provide detailed hydroacoustic surveys for any water body. This can be applied to various site specific problems, including sludge mapping, macrophyte mapping, and substrate classification. See below for examples from a recent (2016) project in Stratford, ...
-
Manufactured by Vulcan Industriesbased in USA
The Model ESK Grit Classifier separates organic materials from heavy inorganic ...
-
Manufactured by GEI Works, LLCbased in USA
A storm drain grate guard is an easy solution for cleaning stormwater runoff that has been polluted by contaminants such as sediment and ...
-
Manufactured by SimPure Sub-Brand of Membrane Solutions, Incbased in USA
SimPure DC5S Whole House Anti Scale Spin Down Water Filter with Siliphos | 40 Micron. ...
-
Manufactured by Chemtronic Waltemode GmbHbased in GERMANY
The laboratory turbidimeter model TurbiLab-FS uses the principles of 12° forward- and 90° side scattered light, to detect suspended particles in liquids. The instrument detects the turbidity of the liquid only, product- or bottle colour will not affect the measuring results The measurement will be done directly in a bottle or in a cuvette. The bottle respectively cuvette, turns around its ...
-
based in USA
The Ambient Water Quality Monitoring System (AWQMS) is a web-based data management system for ambient water quality data. AWQMS provides a single, intuitive tool for consolidating, validating, analyzing, assessing, and sharing your sampling results, observations, and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you