Sediment Sampling Equipment For Soil And Groundwater In Latin America
-
PremiumManufactured by AMS, Inc.based in USA
The Russian Peat Borer (7.5 cm x 60cm model shown) is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling while the pivotal cover plate supports the cutting action of the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Rubber stop with seal to push the sample out of the tube by means of the sample discharge- and partitioning system of the Beeker ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Multisampler, rod operated, standard set, for sampling to a depth of 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Piston sampler (inclusive transport tube and sample gutter) bottom part, operational length 150 cm, ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Extension set to enable working with sample tubes with a length of 150 cm, consisting of set of steel strips for sample tube 150 cm and a piston rod 150 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Frame for suspended load sampler Delft bottle type, to be used to take samples at distances of 10, 20, 30, 40 and 50 cm from the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Double action piston, NBR rubber, with rod connector, for sample tube multisampler internal Ø 39-41 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Handle for Ekman grab, length 150 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sediment core sampler type Beeker, rod operated, with closable cutting head and piston. Standard set for sampling and discharging core samples, length 1 m, in bucket or jars. Suitable for sampling submerged soils to a depth of 5 m of very watery sediment to non-consolidated sand. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Core point to scan the lower boundary of the sediment ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Cap, polyethylene, for inside 40 mm, set of 20 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Aluminium tripod with 5/8" ...
-
PremiumManufactured by AMS, Inc.based in USA
Professional Series Multi-Stage Sediment/Sludge Sampler Kit! This sampling kit provides all of the components needed to collect sludge and sediment samples up to 4' in length. The 12" base section and three extra body sections allow you to assemble a sampler that is 12", 24", 36", or 48". in length. This kit was designed for soil sampling professional who wants the strongest, most durable ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Toolbag with appropriate tools for sediment core sampler type ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Piston rod with detachable handle for sample tube 1 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sample tube, Ø 63x57mm, length 100 cm, pvc transparant, inclusive covers, set of 3 ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily collect sediment or sludge with a technically enhanced core tip and cap. The AMS "valved core tip" fills the sampler without losing the sample upon retrieval. The sampler uses a disposable plastic soil catcher that fits on the end of a 3" x 12" plastic liner. The core tip allows the plastic soil core catcher and liner to fit snuggly over the lip of the core tip. Once the soil core catcher ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The visibility disc according to Secchi is a simple, although not very accurate, means of determining the visibility depth. The visibility disc is lowered into the water with a wire. When the disc is no longer visible in the water, a reading of the depth is made by means of the marks on the rope. The disc is lowered another 0.5 meter and is pulled up slowly. The second reading is done when the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The sediment level stave is part of a standard set for measuring the depth of a sediment layer 4 metres. The set comprises 4 sediment measuring rods of anodic aluminium with screw couplings. The rods are 1 m long and have a diameter of 25 mm. The sediment measuring rods are marked out in 5 cm markings. The set also includes an elbow fitting for the measuring rods so that depth measurements in the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Piston, double action, with scraper rubbers, Ø 56 mm, for sample tube sediment core sampler type ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you