Seepage Equipment For Soil And Groundwater Available In New Jersey
-
PremiumManufactured by CETCObased in USA
Reliable and adaptable REACTIVE CORE MAT gives you the versatility for underwater containment mitigation when shallows and slopes rule out the use of other sediment treatments. It goes where you need ...
-
PremiumManufactured by Rapid Barrier Systems Inc.based in CANADA
Our Premium 72 inch high barriers are currently available in 2 lengths, 25 ft. and 50 ft. They may be used for flood control or cofferdams. All Premium 72 inch barriers are available utilising our heavier weight material. These barriers are 108 inches in width and the effective seepage control is equivalent to a barrier 216 inches wide when used in conjunction with the attached apron; the weight ...
-
Manufactured by BENE Environmental Technologies GmbHbased in GERMANY
Physical adsorption and emulsion separator ...
-
Manufactured by Princebased in USA
PRIMO® SEAL GP (Coarse, Medium, Fine) – Patented, naturally oil-wet, resilient fibers for OBM . ...
-
Manufactured by Taian Jingwei Geosynthetics Co., Ltd.based in CHINA
Our LDPE geomembrane is made from polyethylene virgin resin and has a density ranging from 0.916 to O.SMg/cm3. In addition this transparent LDPE liner is also flexible, chemically stable, elastic, and resistant to high temperatures as well as being electrically insular. With a high mechanical strength, this LDPE geomembrane can work even at a low temperature of -70°C. Compared with HDPE pond ...
-
Manufactured by Innovative Geotechnical Instrumentationbased in INDIA
The model IG 1401 piezometer consists of a rigid cylindrical housing, of diameter 20mm having the innovative vibrating wire sensor inside. The vibrating wire sensor element is completely isolated from the total stresses acting on the body by the help of O rings. The unique design gives a slimline body which accurately reads water pressure without being affected by the surrounding stresses. The ...
-
Manufactured by Openchannelflowbased in USA
The Parshall flume is an economical and accurate way of measuring the flow of water in open channels and non-full pipes. The flume was originally developed to measure surface waters, water rights apportionment, and irrigation flows, but its use has expended to include measuring the flow of sewage (both in pipe and treatment plants), industrial discharges, and seepage from dams. As a class of 22 ...
-
Manufactured by Enventivesbased in USA
A premium blend of micronized, surface modified organic fibers for the prevention and remediation of seepage loss in drilling fluid ...
-
Manufactured by Openchannelflowbased in USA
The Dust Bowl experienced by the United States during 1930’s saw the establishment of the Soil Conservation Service (SCS) on April 27, 1935. The SCS was established as a permanent agency the US Department of Agriculture with a mission to conserve the nation’s soil and water ...
-
Manufactured by Best Project Material Co., Ltd (BPM)based in CHINA
Geomembrane Liner which is made by heat-bonding nonwoven or woven geotextile to HDPE geomembranes by calendaring processing technology is called composite Geomembrane liner. BPM brand composite Geomembrane liner is automatically formed by pressing one or two geotextile layer to the geomembrane layer in the continuous far infrared ray heating oven, polymer and anti-aging materials are added in ...
-
Manufactured by Flood Protection Solutions Ltdbased in UNITED KINGDOM
Puddle pumps are a special kind of submersible pump that have the ability to pump to very low levels of water. They are ideal for draining water from flat surfaces and dealing with seepage. A normal submersible pump is unable to pump to low levels of water, and if not fully submersed, may burn out. A puddle pump does not require any prior installation works, and it is portable so can be used in ...
-
Manufactured by Flood Protection Solutions Ltdbased in UNITED KINGDOM
Sump pumps are fantastic in flood defence schemes, but they must be submersed in water to function correctly. They are often permanently wired in and installed into sumps. When coupled with an automatic float switch they are perfect for passive flood defence ...
-
Manufactured by Zydex Industriesbased in INDIA
Water infiltration causes seepage, leading to cracking of cement / plaster / concrete surfaces, efflorescence, rebar corrosion and fungal growth. Most of the seepage control and water seepage repair chemicals have failed because they interact with the surfaces only from the outside by forming a protective layer. The best and most cost effective seepage solution is treating surfaces and ...
-
Manufactured by Shandong Luyuan Engineering Materials Co. Limitedbased in CHINA
Composite geomembrane is widely used in canal seepage control engineering. In recent years, the large number of applications and the good results of geosynthetics in civil engineering, especially in the flood control engineering have caused the attention of the engineering personnel. For the application technique of geosynthetics, China government brings forward the specification request from the ...
-
Manufactured by Custom Pipe & Coupling Inc.based in USA
All wall pipe configurations employ wall collars which may be of cast ductile iron or mild steel. The wall collar’s primary function is to control seepage. it may also provide varying degree of thrust restraint depending upon application. Currently, no ANSI/AWWA standards exist for wall pipe and sleeves. They are routinely fabricated from component material; pipe. threaded flanges, cast or ...
-
Manufactured by Encardio-Rite Electronics Pvt. Ltd.based in INDIA
The model ESM-12S digital seepage monitoring system is designed for precision measurement and monitoring of seepage in dams or water flow in open channels. Quantity of water seeping through, around or under a dam is of great importance in analyzing structural behaviour of a dam. The seepage or the flow rate data provided by the weir and seepage monitoring system provides important information for ...
-
Manufactured by Yixing Shenzhou Earth Working Material Co., Ltd.based in CHINA
Greatvision brand HDPE geomembranes are a kind of large molecule (macromolecule) polymer as the basic raw material composed of waterproof and cut-offs(insulation & separation) geosynthetic material. type: HDPE geomembrane, composite ...
-
Manufactured by Best Project Material Co., Ltd (BPM)based in CHINA
HDPE liner is the low permeable synthetic membrane liner and geotechnical engineering materials which are widely used for solid waste containment, mining and water containment applications. BPM smooth geomembrane HDPE liner is made of finest quality high density polyethylene (HDPE) with specially formulated, virgin polyethylene resin, combined with specified quantity carbon black, antioxidant, ...
-
Manufactured by Advanced Geosciences, Inc.based in USA
AGI’s Multi-Electrode Switch Box is an accessory to the SuperSting Wi-Fi. It allows the SuperSting Wi-Fi to automatically control and switch passive electrodes connected by a passive multi-electrode cable for automatic data acquisition in 2D, 3D, and 4D surveys. The rugged and sealed design makes it ideal for harsh environments like sub-surface, marine and borehole measurements, and ...
-
Manufactured by Western Environmental Linerbased in USA
Selecting the right geomembrane liner for an application can be a confusing process. There are a wide variety of geomembrane liners available in the market today due to the unique needs of the various industries they are used in. The type of geomembrane that would work best for a specific application can depend on several different factors. These factors include, but are not limited to, size of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you