seismic test (Seismic Monitoring) equipment available in Serbia

  • Cone Penetration Test

    Seismic test are carried out to measure shear (S wave) and compression wave (P wave) velocities in soils. The SCPT method combines the seismic test with results from the CPTU probe, and will give you a good basis for evaluation of a number of critical soil properties, e.g. the risk for liquefaction.

    By Ingenj├Ârsfirman Geotech AB based in Askim, SWEDEN. from Cone Penetration Test (CPT) Product line

  • Seismic Cone

    The seismic cone consists of an S15 piezocone below a tri-axial accelerometer array. The Seismic Cone Penetration Test (SCPT) is carried out like a normal CPT but paused at 1m intervals to perform a seismic test. By striking a nylon block anchored to the grounds surface, a seismic shear wave is generated. The use of nylon produces a cleaner ...

    By Lankelma Limited based in Iden, UNITED KINGDOM. from Cone Penetrometers Product line

  • Solgeo - Model SOL-CH - Cross-Hole Survey Device

    Cross-Hole survey consists in the direct measurements of horizontally travelling compression (P) and shear (S) seismic waves at test sites consisting primarily of soil materials. A borehole seismic source is used to generate a seismic wave train. One or more  receivers are used to detect the arrival of the seismic wave train in offset ...

    By Solgeo srl based in Seriate (BG), ITALY. from Geophysical Research Product line

  • Freedom Data PC - Nondestructive Testing Platforms System

    The Freedom Data PC represents the ultimate professional, versatile, battery powered NDT Platform, as it can be utilized for evaluation of structures/infrastructure and geophysical seismic engineering surveys. A custom module can be added to this platform for the purposes of Structural Health Monitoring, General Purpose Testing, and Data ...

    By Geomorph Instruments based in Nicosia, CYPRUS. from NDT Platforms Product line

  • Olson - Model NDE 360 - Nondestructive Evaluation System

    Simply put, the most versatile and expandable Nondestructive Evaluation (NDE) Platform for QA/QC. Add on any NDE System(s) as you need them without having to return the unit. The use of ultrasonic, sonic, seismic and vibration nondestructive testing techniques for investigating structural elements (e.g. measuring the thickness of a pavement or ...

    By Geomorph Instruments based in Nicosia, CYPRUS. from NDT Platforms Product line

  • Tecnopenta - Model G1- Cone 2S - In Situ Tests Indagini Penetrometriche

    The G1-cone 2S is a cone equipped with two seismic sensors. This device is used to establish the shear wave velocity into the ground. The two seismic sensors are MEMS accelerometers and they are located at 1 m from each other. The instrument is designed to work together with the D1-Sismi USB, a data acquisition card which transfers the data from ...

    By Tecnopenta s.r.l. based in Teolo PD, ITALY. from In Situ Tests - Piezocone System Product line

  • WZG-6A/12A Wave velocity Tester

    WZG-6A/12A is a 24-bit wave velocity tester, under Windows Operation System, based on WZG-24 engineering seismograph. It features multiple function, high precision, high speed, high reliability and fine expansibility. Industrial PC or notebook PC is required to collect data through USB interface; built-in rechargeable battery ensures the ...

    By W.T.S Limited based in Nanshan, CHINA. from Seismograph Product line

  • GunLink - Model MRM - Test Unit

    The GunLink Test Unit is a portable system designed for quick and easy onboard testing of individual GFSM and TEM. The unit provides onboard testing of individual Gun Fire and Sensor Module (GFSM) units and Termination Electronic Modules (TEMs). It’s capable of determining whether they are working correctly either before, in the case of ...

    By Seamap Inc. based in Huntsville, TEXAS (USA). from Seismic Products Product line

  • Model GS101 - Distributed High Precision Land Seismograph

    GS101 distributed high precision land seismograph adopt the 32-bit high precision Σ -Δ ADC. It supports ten thousand channel 2D and 3D seismic exploration. The instruments contain industry PC, master station, cross station, acquisition station. The connection structure is very flexible and light. Exploration depth can reach from ...

    By Geospace Survey Services based in Littleover, Derby, UNITED KINGDOM.

  • Vibration and Acceleration Values

    Knowledge of vibration and acceleration values generated by machines, states the health of these. It is one of the typical applications where accelerometers are used. There are many applications where it is needed to determine the vibration and acceleration values. Measurements in aerogenerators, structural tests, seismic analysis, vibration test ...

    By instrutechSOLUTIONS based in Las Rozas de Madrid, SPAIN. from Measurement Sensors Product line

  • MAE - Model S485 - Multichannel Digital Seismic Acquisition System

    Seismograph for active and passive seismic tests with distributive architecture and freely configuration of the number of channels from 1 to 24. S485 System is made by a series of miniaturized loggers/digitizers, equipped by standard sockets with Mueller connection for geophones, distributed along the cable. Distributive architecture allows a ...

    By M.A.E. Advanced Geophysics Instruments based in Frosolone (IS), ITALY. from Seismics - Active Seismic Product line

  • TIGERFLOW - HVAC Pumping Systems

    Any Pump from any Manufacturer. Certified Factory Testing. Air separators, Expansion Tanks. Seismic Isolation Bases. Custom Dimensional Requirements. Up to 12000 gpm. Complete Controls with TIGERFLOW MARK VI. May include Chiller, Tower, and/or Boiler Controls.

    By TIGERFLOW Systems, Inc. based in Dallas, TEXAS (USA). from HVAC Product line

  • Fiber Optic Technologies

    Paulsson, Inc. offers state-of-the-art Fiber Optic Technologies for multiple purposes. Paulsson, Inc. is the developer of the Fiber Optic Seismic Vector Sensor (FOSS) system. The Paulsson, Inc. FOSS system outperforms any comparable sensor to date. Test data available upon request.

    By Paulsson, Inc. (PI) based in Van Nuys, CALIFORNIA (USA).

  • Ref Tek - Model 125A - Miniature Seismic Recorder

    The 125A Miniature Seismic Recorder (Texan) is an important advancement in the seismology industry. The Texan self-contained, compact design allows greater flexibility and the ability to easily integrate into system operations. Typically used for active source crustal reflection & refraction, exploration 3-D Noise testing & aftershock studies the ...

    By Geomatrix Earth Science Ltd based in Leighton Buzzard, UNITED KINGDOM. from Land Geophysical Equipment - Seismic Product line

  • Vertek - Model DataPack 2010 - CPT Data Acquisition Unit

    Vertek’s DataPack 2010 is a field portable Cone Penetrometer Test (CPT) data acquisition and analysis package combining the capabilities of our digital CPT cones, the FFD (Fuel Fluorescence Detector) probes, seismic geophone equipped cones, and other specialized Vertek probes. Developed as a simple ‘all-in-one’ solution for the ...

    By Vertek a Division of ARA based in Randolph, VERMONT (USA). from VTK Series CPT Equipment Product line

  • Model GSX - Land Based Recorder

    The GSX is designed for cable-free/radio-free seismic data recording. The self-contained unit in-cludes 1 to 4 channels of 24-bit digitization, an integrated/high sensitivity GPS receiver, built-in test signal generator, up to 16 GB per channel of non-volatile solid-state data storage, and a high-speed data port. The unit is housed in a sealed ...

    By Geospace Technologies Corporation based in Houston, TEXAS (USA). from Land Seismic Data Acquisition Products Product line

  • Douce Hydro - Viscous Fluid Dampers

    In July 2008, Douce-Hydro took over the activities of Jarret Structures, which specializes in the design and manufacture of viscous fluid dampers for the protection from shock and vibration in the seismic and civil engineering industries. Jarret Structures offers a wide range of patented damping devices and, by utilizing its extensive design ...

    By Douce-Hydro SAS based in Albert cedex, FRANCE. from Other Products Product line

  • Cummins - Model RS100 - Natural Gas & LPG Generator

    Tested and certified per the latest EPA, UL and IBC Seismic standards and is capable of meeting NFPA 110 requirements when equipped with the necessary accessories and properly installed. The innovative, flexible exercise mode enables the generator to exercise at a specific day, time, duration and with or without load. The aesthetically appealing ...

    By MTS Power Products based in Miami, FLORIDA (USA). from MTS Generator Sets Product line

  • Cummins - Model RS22 - Natural Gas & LPG Generator

    Tested and certified per the latest EPA, UL and IBC Seismic standards and is capable of meeting NFPA 110 requirements when equipped with the necessary accessories and properly installed. The innovative, flexible exercise mode enables the generator to exercise at a specific day, time, duration and with or without load. The aesthetically appealing ...

    By MTS Power Products based in Miami, FLORIDA (USA). from MTS Generator Sets Product line

  • Allan - Block

    The Allan Block success began three decades ago with the introduction of their patented segmental retaining wall product – The Original Allan Block. The success story continues with the development of creative and innovative construction products, aiming to revolutionise the way the world builds. The Allan Block stacks beautifully and ...

    By Cirtex based in Kopu, NEW ZEALAND. from Block Retaining Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you