Seismic Profiling Equipment For Soil And Groundwater Available In Papua New Guinea
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Seismic cone penetration testing (SCPT or SCPTu) is an accurate and reliable geotechnical instrument and system used to determine low strain in-situ compression (P) and shear (S) wave velocity profiles. Our seismic CPT system is made for the international ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
Deep water sub-bottom profiling applications (1Km to 12Km) require an array of 4 to 36 low frequency transducers installed in a hull-mounted sea chest. The HMS-12KM system with the HMS-622 CHIRPceiverTM and hull mounted transducer arrays fills this range of survey requirements. The frequency bands supported by the HMS- 12KM include LF (1KHz-10KHz) and HF (8KHz-23KHz) with a standard 2 channel ...
-
Manufactured by Sentek Instrument LLCbased in USA
Distributed acoustic sensing (DAS) is demanded in many applications. Traditionally, fiber optic DAS systems are based on time domain detection of Rayleigh backscatters produced by a laser pulse in the sensing fiber. Due to the extremely weak nature of the Rayleigh scattering, these systems often have an acoustic detection sensitivity limited to the order of nanostrains, as a measure of the ...
-
Manufactured by Güralp Systems Ltd.based in UNITED KINGDOM
The 3T borehole system designed for borehole diameters of 99 to 203 mm. The 3T analogue sensors can be combined with a DM24 borehole digitiser and EAM data acquisition module to build a fully networked authenticating digital instrument inside a single borehole. The instrument is supplied with surge protection and a strain relief mechanism to isolate the sensors in the instrument from motions in ...
-
Manufactured by MoHo s.r.l.based in ITALY
TROMINO is an ideal solution in Engineering Geology for seismic site effect assessment, seismic microzonation, Vs30 estimates, passive seismic stratigraphy, bedrock mapping. Supporting geologists, geophysicists and geotechnical engineers in their daily activities. TROMINO was specifically conceived and designed for the dynamic characterization of subsoils with the highest accuracy and the lowest ...
-
Manufactured by Vinci Technologies SAbased in FRANCE
GEOREC is a downhole digital tool designed for seismic acquisition in HP & HT conditions. Each GEOREC single level includes 3 fixed or gimballed geophones, with pressure and temperature gauges, and is provided with its own power supply and telemetry. Up to 48 GEOREC levels can be successively connected with a 7 conductors standard ...
-
Manufactured by MoHo s.r.l.based in ITALY
TROMINO is an ideal solution in Civil Engineering for the operational modal analysis of structures, vibration monitoring and soil-structure interaction studies. Supporting engineers and architects in the design, monitoring, modelling and retrofitting of structures. TROMINO, originally conceived for the dynamic characterization of subsoils, has been increasingly used for the operational modal ...
-
Manufactured by Geodevicebased in FRANCE
DAQLink-4 is a cutting-edge performance portable multichannel 24-bit digital seismograph. It can operate as a stand-alone unit for small and fast near-surface surveys, acquisition system for larger projects with online monitor and data quality control, as well as passive monitoring and automated event ...
-
Manufactured by Güralp Systems Ltd.based in UNITED KINGDOM
The Radian Bore-hole is designed for installations in cased bore-holes of between 60 mm and 100 mm diameter, up to depths of 2000 ...
-
Manufactured by OptaSensebased in USA
The ODH5X Interrogator Unit is an ultra-high performance quantitative distributed fiber sensing solution delivering outstanding output with an operational range up to 50,000 meters. ...
-
Manufactured by Vinci Technologies SAbased in FRANCE
GEOREC-S is a slim downhole digital tool designed for seismic acquisition in HT conditions. Each GEOREC-S single level includes 3 fixed geophones (optionally, the geophones can be replaced by accelerometers), pressure and temperature gauges and the level is provided with its own power supply and telemetry. Up to 48 GEOREC-S levels can be successively connected with a 7 conductors standard ...
-
Manufactured by PASI s.r.l.based in ITALY
POLARES32, the best resolution with unlimited number of electrodes. Compact, simple and intuitive, POLARES32 electrical imaging system can simultaneously measure and display all survey parameters: earth resistivity, current, voltage, self potential (SP), induced polarization (IP) and quality index of the measurements. It can manage the most used multi-electrode arrays for apparent resistivity ...
-
Manufactured by Paulsson, Inc. (PI)based in USA
Large channel-count geophone arrays, up to 400 3C receivers, at custom intervals for 1D/2D/3D/4D Vertical Seismic Profiling (VSP) are Paulsson's specialty. Real-time micro seismic monitoring can effectively be derived from this cutting-edge deployment ...
-
Manufactured by Güralp Systems Ltd.based in UNITED KINGDOM
The Radian Posthole is operational at any angle, meaning it can be deployed in uncased holes up to 100 m deep. The pilot cone at the end of the Radian Posthole is designed to aid direct ...
-
Manufactured by Oy Meridata Finland Ltdbased in FINLAND
Boomers are seismic reflection profiling equipment that typically operate at frequencies ranging from 0.7 to 2 kHz, and give good resolution while providing improved sub-bottom penetration in comparison with higher frequency ...
-
based in RUSSIA
Seismic station SGD-SEL for profile survey. Seismic station SGD-SEL is designed for engineering geophysical ...
-
Manufactured by Geodevicebased in FRANCE
Jack energy sources ensure the operation of sparker and electrodynamic sources used in geophysical surveys in boreholes by methods of crosshole seismic testing (CST), vertical seismic profiling (VSP), vertical seismoacoustic profiling (VSaP) and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you