Only show results in Virginia? Ok

seismic survey (Seismic Surveys) equipment

  • Geometics - Model GeoEel - High Resolution 2D Seismic Survey

    Geometrics SolidTM GeoEel’s elegant design offers superior performance for high resolution 2D seismic surveys.

    By Geomatrix Earth Science Ltd based in Leighton Buzzard, UNITED KINGDOM. from Land Geophysical Equipment - Seismic Product line

  • Premium

    Model SOILSPY - Multichannel Seismograph

    Bringing the past of multichannel seismographs to a new life. SOILSPY is the MoHo’s multichannel digital system for active and passive seismic surveys. A number of unique features make it a very special seismograph. The signal is amplified and digitized where it is produced and not at the end of long cables: this ensures better recording ...

    By MoHo s.r.l. based in Marghera (Venice), ITALY. from Soilspy Product line

  • Premium

    Portable (BackPack) Manual Winch Direct Drive

    The HR-1 and HR-2 are designed for line handling duties. The HR-1 is direct drive, while the HR-2 has two speeds available.

    By General Oceanics Inc. based in Miami, FLORIDA (USA). from Blocks and Sheaves Product line

  • Premium

    Portable (BackPack) Manual Winch 2 Speed

    Winch, Portable (Backpack) Manual 2 Speed. HR-1/HR-2 Backpack Winch. The HR-1 and HR-2 are designed for line handling duties. The HR-1 is direct drive, while the HR-2 has two speeds available.

    By General Oceanics Inc. based in Miami, FLORIDA (USA). from Blocks and Sheaves Product line

  • Premium

    Model TROMINO - Reactive Tromograph for Geology

    TROMINO is an ideal solution in Engineering Geology for seismic site effect assessment, seismic microzonation, Vs30 estimates, passive seismic stratigraphy, bedrock mapping. Supporting geologists, geophysicists and geotechnical engineers in their daily activities. TROMINO was specifically conceived and designed for the dynamic characterization of ...

    By MoHo s.r.l. based in Marghera (Venice), ITALY. from Tromino Product line

  • Model Elvis III S8/P8 - Surface Vibrator Source

    The Vibrator Source ElViS III is used to generate P- or S-wave sweep signals. The source consists of a moving mass driven by a cascaded linear motor. The source is fully cased. An adjustable pneumatic suspension ensures a maximum release of seismic energy under different surface conditions. The source is most suitable for reflection seismic ...

    By Geotomographie GmbH based in Neuwied, GERMANY. from Surface Sources Product line

  • Model IPG5000 - Impulse Generator

    The Impulse Generator IPG5000 (formerly named IPG1005) is the high voltage supply to the seismic borehole sources BIS-SH and SBS42. The energy is stored in a large capacitor bank which discharges through a mechanical switch. The IPG5000 is controlled by a Remote Control Unit (RCU). The RCU allows the user to start the seismic survey by a single or ...

    By Geotomographie GmbH based in Neuwied, GERMANY. from Power Supply Product line

  • Geostuff - Land Streamer System

    A land streamer is an array of geophones designed to be towed along the ground. The name originates from marine streamers: arrays of hydrophones towed behind boats for marine seismic surveys. Land geophysicists have long envied the high productivity achieved in marine surveys. Now it appears that highly-productive reflection, refraction, and ...

    By Geostuff based in Lincoln, CALIFORNIA (USA).

  • Marine and freshwater sparkers

    Sparker is a marine seismic source, which generates acoustic signal by discharging an electrical pulse and is typically used for high-resolution (HR), ultra-high-resolution marine seismic surveys and VSP. Typically, sparkers are used in marine seismic acquisitions in seas and oceans, as salt water is a good current conductor. Salt Water Sparkers ...

    By GEODEVICE based in Saint Maximin La Sainte Baume, FRANCE. from Marine seismic complexe Product line

  • Energy source MultiJack

    MultiJack energy source is designed to supply operations of sparker and boomer sound sources that are typically used for high resolution (HR), ultra-high-resolution (UHR) marine seismic surveys and VSP.MultiJack is a unique device with the fastest charging rate available on the market, which results in possibility to acquire marine seismic ...

    By GEODEVICE based in Saint Maximin La Sainte Baume, FRANCE. from Marine seismic complexe Product line

  • MAE Sysmatrack - 12 Channel Seismograph, Expandable to 24 Channels, 24 Bit Resolution With Integrated Battery

    24 bit seismograph for seismic prospecting with refraction, reflection survey, active and passive MASW (Re.Mi.), SASW, Down-hole, Cross-hole methods. Unit is equipped with 24 bit resolution acquisition board and is available in 12 channels version expandable to 24. Two 24 pole connectors for seismic cables of 12 channels each, starter connector, ...

    By M.A.E. Advanced Geophysics Instruments based in Frosolone (IS), ITALY. from Seismics - Active Seismic Monitoring Product line

  • Ocean Sound Meter

    The Ocean Sound Meter is an over-the-side underwater sound level meter and acoustic recorder specifically designed for environmental noise assessments: Precisely calibrated to quantify sound from: Pile driving. Seismic surveys. Low- and mid-frequency sonar. Ambient/background noise. Displays acoustic data and computed levels in real time with ...

    By JASCO Applied Sciences (Canada) Ltd. based in Victoria, BRITISH COLUMBIA (CANADA).

  • Geomative - Model GS201 - Distributed Seismograph System

    The GS-201 distributed high-precision terrestrial seismometer uses a 32-bit high-precision Σ-Δ ADC that supports 10,000-channel 2D and 3D seismic surveys and supports 4000 channels at 1ms sampling interval. The instrument adopts the topology of industrial notebook, main control station, cross station and collection station, ...

    By ST Geomative Co., Ltd. based in Nanshan, CHINA. from Seismograph Products Product line

  • Seismoelectrics - Model DC-4800 - Ground-flow Locator (Vertical Penetration Depth 15,000 ft)

    Seismic Source: The nature of generation of the seismic source is critical to the seismic and seismoelectric survey results. The seismic source includes: Sledge Hammer, “Buffalo Gun”, and Weight Drop Seismic Source.

    By Seismo Electronic LLC. based in Houston, TEXAS (USA).

  • Model SGD - Seismic Equipment

    Seismic station SGD-SEL for profile survey. Seismic station SGD-SEL is designed for engineering geophysical investigations.

    By Zond Software based in Saint-Petersburg, RUSSIA.

  • Freedom Data PC - Non-Destructive Testing Platforms System

    The Freedom Data PC represents the ultimate professional, versatile, battery powered NDT Platform, as it can be utilized for evaluation of structures/infrastructure and geophysical seismic engineering surveys. A custom module can be added to this platform for the purposes of Structural Health Monitoring, General Purpose Testing, and Data ...

    By Geomorph Instruments based in Nicosia, CYPRUS. from NDT Platforms Product line

  • AnySeis - Cableless Exploration Seismograph System

    AnySeis is an entirely new concept in an exploration seismic system−it's cableless; freeing you from the bondage of spread cables! AnySeis modules clamp onto standard 2-conductor lamp cord in Any spacing, Any configuration, and Any channel count to dramatically simplify your survey setups.

    By Geostuff based in Lincoln, CALIFORNIA (USA).

  • PASI - Model CHE - Cross Hole Energizer P/S

    Specially designed for small-scale cross-hole surveys, this compact hammer can be used to generate both P and S waves.The hammer can be downloaded using the steel cable and clamped to the requested depth by a pneumatic clamping system manually controlled by a lever from the surface; simply pushing up the steel cable to execute the first shot, the ...

    By PASI s.r.l. based in Torino, ITALY. from Seismic - Energizer Product line

  • Tecnopenta - Model G1-CPLS D - Piezocone System

    G1-CPLS D is the latest release of the famous G1-CPLS equipment to perform SCPTU geotechnical survey. It contains all the technology and the knowledge acquired by Tecnopenta, in a shorter case.

    By Tecnopenta s.r.l. based in Teolo PD, ITALY. from In Situ Tests - Piezocone System Product line

  • Ground Conductivity

    Ground Conductivity Mapping is an electromagnetic technique used to investigate lateral variations in overburden material and variations in depth to bedrock. This EM31 survey technique (shown below) determines the apparent conductivity of the ground material from 0-6 m bgl.

    By Apex Geoservices Ltd based in Wexford, IRELAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you