Seismic Testing Equipment For Soil And Groundwater Available In Slovakia
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Seismic cone penetration testing (SCPT or SCPTu) is an accurate and reliable geotechnical instrument and system used to determine low strain in-situ compression (P) and shear (S) wave velocity profiles. Our seismic CPT system is made for the international ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
A 200 kN trailer-based CPT penetrometer rig is a lightweight and economical rig with full CPT testing capabilities. It is suitable for both electrical and mechanical CPT testing. It can be towed easily by a 4-wheeldrive car. It comprises a sturdy 2-axle trailer base, a 2-cylinder CPT penetrometer pusher, a diesel-hydraulic power-pack with load-sensing pump, manually operated valves, a work ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Truly robust crawler-based CPT penetrometer pushing rig with rubber tracks, Hatz 3-cylinder diesel engine incorporated in a sound insulating enclosure, load-sensing hydraulic pump, a 200 kN CPT penetrometer pusher, unique anchoring system on reaction arm. Practically all functionalities are controlled by means of a wireless remote control. The Griffin 200 kN is made of the highest quality ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
A complete range of cables is available for the P- and S-type electric CPT cones / piezocones. The string of cables connects the electric CPT cone / piezocone to the CPT-Logger data acquisition unit. Please have a look at the information underneath for detailed information on CPT sounding cables. If you are in doubt, please consult the Gouda-Geo sales department to determine the appropriate cable ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Electrical CPT cones and piezocones are high-precision measuring instruments purposely developed for geotechnical soil investigation. You can find these products at Gouda Geo-Equipment. We take great pride in being one of the market-leading brands when it comes to CPT products. Count on our innovative products to help you gather the most accurate soil characteristics ...
-
Manufactured by Geotomographie GmbHbased in GERMANY
The Deviation Probe DevProbe1 is used to measure the borehole deviation. A three-axis magnetometer measures the azimuthal direction of the borehole and a dual tilt sensor provides information about the inclination. The probe is sealed and temperature compensated. Borehole deviation is required to determine the precise XYZ location of a seismic source or geophone inside a borehole. A software is ...
-
Manufactured by LiTeM Life Testing Machinesbased in ITALY
The RTC 9001 controller range has been developed and assembled in Italy, using the best available technologies; essential to perform precise and reliable mechanical structural tests, allowing for the management of different types of actuators and motors. The RTC 9001 is a mono-axial controller (non-expandable); it can run static and cyclical tests both in displacement control, force control, aux ...
-
based in USA
With our Core rooftop units (formerly Series 12R), you can get the exact fit you need plus the features you want. From USB data transfers to innovative refrigerant, with our Core units you can literally have it all. Save time and money on installation with this reliable unit. Our Core units come available in two compact cabinet sizes, two footprint sizes and two height options. Enjoy the ...
-
Manufactured by Bremer Valves S.r.l.based in ITALY
For LNG service and for all applications where low temperature, liquefied medium or safe environment protection are the main focus, BREMER VALVES has designed a new “side ball type” top entry ball valve, putting together characteristics and advantages of traditional trunnion ball valves with “C” or sector valve. At the heart of this valve is the innovative “side ball ...
-
Distributed by instrutechSOLUTIONSbased in SPAIN
Knowledge of vibration and acceleration values generated by machines, states the health of these. It is one of the typical applications where accelerometers are used. There are many applications where it is needed to determine the vibration and acceleration values. Measurements in aerogenerators, structural tests, seismic analysis, vibration test in automotive, flight test, measurement in ...
-
Manufactured by Geotomographie GmbHbased in GERMANY
The Impulse Generator IPG5000 (formerly named IPG1005) is the high voltage supply to the seismic borehole sources BIS-SH and SBS42. This generator is applicable for seismic tomography and crosshole tests in depths greater than 60 m. The energy is stored in a large capacitor bank, which discharges through a mechanical switch. The IPG5000 is controlled by a Remote Control Unit (RCU). The RCU allows ...
-
Manufactured by Bularmex-IKbased in BULGARIA
The KiP globe valve (manometric) has pressure seal construction for sizes from DN8-15 PN250 and working temperature up to 600°C. The seat of the stem is produced from welded-on hard alloy material (Stellite) with body of stainless steel Wâ„–1.4541/X6CrNiTi18-10. Connection: on welding; on thread; union; nipple connection for manometer. The model successfully replaces the ...
-
Manufactured by Olson Instruments, Inc.based in USA
Sonic Echo-Impulse Response is used for low strain integrity testing of piles and determination of deep foundation length. The Sonic Echo-Impulse Response test method (also known as the Pile Integrity Test, or PIT) is designed to determine the length and integrity of foundations when the top or part of the upper side of the foundation is accessible. This method can be used on both new and ...
-
Manufactured by Olson Instruments, Inc.based in USA
Impact Echo Scanning (IES) investigations are performed on large structural members with smooth concrete where shallow voids, honeycomb, cracking or delaminations are of primary concern. The Impact Echo Scanning (IES) system is designed for large area investigations of shallow voids, debonding/delamination, cracking, or honeycomb often found between an overlay on a bridge deck or ...
-
Manufactured by Olson Instruments, Inc.based in USA
The Slab Impulse Response method is excellent for evaluating the condition of slab subgrade support. The Slab Impulse Response (SIR) system is designed to identify subgrade voids below slabs-on-grade less than two feet thick. In addition, the Slab IR test method can be used on other concrete structures to quickly locate areas with delaminations or voids in the concrete, if the damage is ...
-
Manufactured by Olson Instruments, Inc.based in USA
Ultrasonic Pulse Velocity (UPV) investigations are performed to assess the condition of structural members if access to both sides is available. Sonic Pulse Velocity (SPV) is performed on mass concrete over 10 ft (3 m) thick. The Ultrasonic Pulse Velocity (UPV) systems are designed to identify and map voids, honeycomb, cracks, delaminations, and other damage in concrete, wood, masonry, stone, ...
-
Manufactured by Cirtexbased in NEW ZEALAND
The Allan Block success began three decades ago with the introduction of their patented segmental retaining wall product – The Original Allan Block. The success story continues with the development of creative and innovative construction products, aiming to revolutionise the way the world builds. The Allan Block stacks beautifully and creates a smooth and fluid finish for every wall, ...
-
Manufactured by Bremer Valves S.r.l.based in ITALY
The BREMER bottom tank ball valve has a geometric design that allows a smooth flow and prevents stagnating of the ...
-
Manufactured by LiTeM Life Testing Machinesbased in ITALY
The RTC 9002 controller range has been developed and assembled in Italy, using the best available technologies; essential to perform precise and reliable mechanical structural tests, allowing for the management of different types of actuators and motors. The RTC 9002 is a bi-axial controller (non-expandable); it can run static and cyclical tests both in displacement control, force control, aux ...
-
Manufactured by Geobit Instrumentsbased in GREECE
The S-20 seismometer is a three-component velocity output near broad band seismic sensor. The design is based on the electronic velocity feedback which is applied to single coil low period geophone. The frequency bandwidth is extended from 50Hz, down to 20sec. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you