Soil And Groundwater Services In Tennessee
-
PremiumManufactured by USA Borescopesbased in USA
Videoscope/Borescope inspections can be performed on several types of engines. Inspections are not limited to jet ...
-
PremiumManufactured by Finn Corporationbased in USA
FINN continues to develop and adapt our equipment to fit new applications. From oil field reclamation to fire suppression to the U.S. military, we are Covering New Ground. Depending on the industry application, we’ve modified units with tracks, equipped them with special axles and tires, designed special frames, and even tailored a collapsible rail system to meet unusual height ...
-
PremiumManufactured by Finn Corporationbased in USA
As the industry leader in erosion control equipment, we offer the industry’s best warranty on the industry's best ...
-
based in USA
ACME Industrial Piping specializes in manufacturing construction as a 'One Stop' solution in manufacturing construction. These specialties include the installation of machinery, equipment, pumps, as well as structural construction, rigging, and hoisting. We can take your idea from the drawing board to ...
-
Manufactured by Cascade Drillingbased in USA
Cascade Drilling now manages Investigation Derived Waste, both non-hazardous and hazardous. One of the biggest headaches in an Environmental Drilling project is the management and disposal of Investigation Derived Waste (IDW). To alleviate this issue, Cascade uses our National buying power to broker these wastes thereby saving you money and considerable time. You get the benefit of using licensed ...
-
Manufactured by Cascade Drillingbased in USA
Locating underground utilities and other subsurface improvements is not always possible. Some utilities are non-conductive or masked by debris in the surrounding back fill. Hitting buried utilities is expensive. To decrease the possibility of these encounters, Cascade Drilling operates a fleet of vacuum trucks to pre-clear the drilling locations to as deep as 10 feet below the ground depending on ...
-
based in USA
CJ Environmental, Inc. has a long history of excellence in the dental community along with an outstanding reputation for reliability and service. We are members of The National Association of Dental Laboratories, The International Precious Metal Institute and The Better Business Bureau. We refine Gold, Silver, Platinum & Palladium from dental scrap using the most technologically advanced ...
-
based in USA
PM Environmental, Inc. (PM) is experienced in designing and completing Phase II Environmental Site Assessments (ESAs) in accordance with the American Society for Testing and Materials (ASTM) Standard for Environmental Site Assessments: Phase II Environmental Site Assessment Process, State and Federal requirements and customized to meet client needs and budgets. PME has completed thousands of ...
-
Manufactured by Aqua Bailers, Inc.based in USA
Aqua Bailers is dedicated to ensuring your needs are met, whether it’s a last-minute express package or automatic monthly shipping. When you call our office, you will speak with a representative who can provide a knowledgeable response to your questions or take your order. Our goal is to provide you with superior service along with superior products. We can meet any custom bailer need. ...
-
based in USA
Where On-Going Operations and Fumes are a Concern.Negative Pressure Vacuum Systems Evacuate Exhaust Fumes.Floor Fans Positioned to Disperse Fumes.Low Clearance Rigs.Full Containment Drilling to Minimize Housekeeping ...
-
based in USA
Modified Contact Grouting (MCG) is a relatively new grouting technique. MCG utilizes the systems which are installed to divert water away from cast-in-place (CIP) installations to deliver grout to rock mass discontinuities, thus, essentially combining the contact grouting and consolidation grouting processes. The technique can generally be used on any structure for which contact grouting can be ...
-
based in USA
Consolidation grouting is a general term for grouting that is carried out within rock masses with the intent of filling rock mass discontinuities. Depending on the intent and timing of the grouting, any of the following grouting techniques may be consolidation grouting: Pre-excavation grouting, post-excavation grouting, grout curtains, water cut-off ...
-
based in USA
Chase project managers, engineers and field crews are committed to providing remediation and waste treatment services that meet your quality standards and budget. Chase has full bonding capabilities so we can provide you with: Hazardous and non-hazardous waste removal. Transportation, disposal and brokerage services. Treatment of soil and groundwater contamination. Lab packing and consolidation. ...
-
Manufactured by Cascade Drillingbased in USA
Cascade provides a full range of injection and emplacement services for aerobic degradation of petroleum hydrocarbons and anaerobic dechlorination of chlorinated solvents. We have designed and delivered millions of gallons of carbon substrates to support dechlorination of chlorinated solvents. As well as hundreds of applications of calcium peroxide for aerobic degradation at petroleum UST ...
-
Manufactured by Cascade Drillingbased in USA
Sonic technology is ideal for both deep and shallow drilling applications where undisturbed core sampling through almost any type of geological formation is required. This powerful technology provides many advantages over other types of drilling techniques. It is a low-impact technology that is safer by minimizing crew tool handling. By rotating and vibrating the rod, core barrel, and casing at ...
-
based in USA
Leak detection is the systematic search for leaks within a property’s entire distribution system. While many leaks are detected when utility personnel or citizens observe water flowing out of the ground, an effective leak detection program uses electronic equipment to identify leak sounds and pinpoints the precise locations of underground leaks. Because leaks can develop at any time, ...
-
Manufactured by Cascade Drillingbased in USA
Cascade Drilling, L.P. serves the mineral exploration and mine development markets. We operate Sonic, Air Rotary, Top Drive Hammer, Under Reamer and Reverse Circulation, Rock Coring and Mud Rotary drilling. Our customers can expect a consistent, safe and professional service at any ...
-
based in USA
The company has 30 employees with 12 drill teams with 19 different type of drill units. The drill crews average 15 years of experience, each, in the industry. All drilling personnel have updated hazardous waste training. The company has been involved with hundreds of environmental projects over the years. Included in these projects are typical UST sites, Landfill subsurface investigations and ...
-
based in CANADA
Rock and Soil Anchors are structural members that are used to provide temporary or permanent structural support. A rock or soil anchor consists of a tendon and an anchorage. The tendon can be one or more solid steel bars, a single hollow bar, or a bundle of high strength tensile steel strands. After drilling, installation and grouting, the anchors are tested to ensure that they are capable of ...
-
based in CANADA
Soil Mixing technology is the latest generation of soil mixing, injecting and mixing binding agents (generally cement) with the aid of water and air with in-situ soils to produce a final hardened product. Once cured, these mixed soil/cement elements are capable of supporting soils and retaining groundwater for deep excavations, environmental cut-off walls or carrying structural ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you