Perchlorate (Site Remediation) Equipment In Africa
-
PremiumManufactured by General Oceanics Inc.based in USA
Magnesium perchlorate, for analysis ACS, desiccant 500GM. Part number: ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep A Supp 5 - 100/4.0 allows highly efficient, rapid separations. This property makes the Metrosep A Supp 5 - 100/4.0 the standard column for short analysis times and the determination of anions which elute late (e.g., ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Kit, Scrubber & Desiccant Tube LICOR 7000. Also requires Magnesium Perchlorate and Ascarite II or (Soda Lime). Part number: 9960-093. ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Kit, Scrubber & Desiccant Tube LICOR 7000 Also requires Magnesium Perchlorate and Ascarite II or (Soda Lime) Kit, Scrubber & Desiccant Tube LICOR 7000 Also requires Magnesium Perchlorate and Ascarite II or (Soda ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep A Supp 10 - 100/4.0 separation column is based on a high-capacity polystyrene-divinylbenzene copolymer with a particle size of only 4.6 µm. This column is characterized by high plate numbers and high selectivity. Sulfite and sulfate thus can be reliably separated in the eluent without the addition of organic modifiers. These characteristics are supplemented by great flexibility ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep Dual 4 separation columns are based on a functionalized Monolith based on silica gel. The Monolith permits an eluent flow of up to 5 mL/min. Despite the high flow, the column is characterized by low backpressure. In contrast to traditional materials, the Monolith has a much larger surface due to its structure of macropores and mesopores. This contributes to the high column capacity ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep A Supp 5 - 50/4.0 separates the seven standard anions in less than 6 minutes. Even fluoride is still separated from the injection peak and can be integrated perfectly. Like all columns in the A Supp 5 product range, the column based on a polyvinyl alcohol polymer is characterized by high plate numbers and therefore by outstanding separating efficiency. The Metrosep A Supp 5 - 50/4.0 ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Hamilton-PRP-X300 ion exclusion column is a cation exchanger column with low capacity. The combination of a polystyrene-divinylbenzene copolymer with sulfonic acid groups as ion exchanger is ideal for the solution of simple separation problems. This column features the possibility of determining the salts of organic acids, in particular the very sensitive determination of formate. ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep A Supp 10 - 75/4.0 separation column is based on a high-capacity polystyrene-divinylbenzene copolymer with a particle size of only 4.6 µm. Under standard conditions, phosphate elutes between nitrite and bromide. Currently, applications can be optimized by modifying temperature, composition of the eluent and ...
-
by V:KIT Ltdbased in UNITED KINGDOM
HPLC Gradient system with UV Detector kit, suitable for qualifying gradient HPLC systems with UV/DAD/PDA detectors using Holmium Perchlorate in the range ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
The new carbon / sulfur analyzer ELEMENTRAC CS-i was developed for the accurate and safe analysis of carbon and sulfur in inorganic samples. The analyzer is equipped with a powerful induction furnace for sample combustion. Up to four highly sensitive infrared (IR) cells allow the analyzer to determine both high and low carbon and sulfur concentrations in only one measurement run. The measuring ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
ELTRA’s 580A analyzers (A = Autoloader) are equipped with an automatic sample loader, allowing for analysis of large numbers of samples without operator intervention. The sample loader is available in two versions to accommodate 36 or 130 crucibles. The CS-580A is based on the technology of the CS-580 analyzer and features a vertical resistance furnace with ceramic tube. The temperature can ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
ELTRA‘s CHS-580 is the ideal analyzer for the simultaneous determination of carbon, hydrogen and sulfur in organic samples.Thanks to sample weights of 500 mg and more, even inhomogeneous materials can be reliably analyzed. The temperature of the powerful horizontal resistance furnace with ceramic tube can be set in steps from 1 °C to a maximum of 1,550 °C. The analyzer can be ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
Thanks to sample weights of 500 mg and more, even inhomogeneous materials can be reliably analyzed. The temperature of the powerful horizontal resistance furnace with ceramic tube can be set in steps from 1 °C to a maximum of 1,550 °C. The analyzer can be equipped with up to four independent infrared cells according to the user‘s requirements, allowing for a great variety of ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
ELTRA‘s CHS-580A is the ideal analyzer for the simultaneous determination of carbon, hydogen and sulfur in organic samples. ELTRA’s 580A analyzers (A = Autoloader) are equipped with an automatic sample loader, allowing for analysis of large numbers of samples without operator intervention. The sample loader is available in two versions to accommodate 36 or 130 crucibles. The CHS-580A ...
-
Manufactured by Verder Scientificbased in GERMANY
The new carbon / sulfur analyzer ELEMENTRAC CS-i was developed for the accurate and safe analysis of carbon and sulfur in inorganic samples. The analyzer is equipped with a powerful induction furnace for sample ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
ELTRA's CS-2000 is the only analyzer on the market for thedetermination of carbon and sulfur in organic as well as inorganic samples. For this purpose, the CS-2000 is equipped with both an induction and a resistance furnace (ELTRA Dual Furnace Technology), covering the full range of carbon and sulfur analysis. The CS-2000 is available with up to four independent infrared cells, which allow the ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
The ELEMENTRAC OH-p determines oxygen and hydrogen in inorganic samples by inert gas fusion in an impulse furnace with temperatures in excess of 3,000 °C. The ELEMENTRAC OH-p guarantees precise and fast sample analysis. The analyzer covers a wide range of applications such as metal,ceramics and other inorganic materials. The ELEMENTRAC OH-p can be supplied with up to two infrared cells with ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
The ELEMENTRAC ON-p determines oxygen and nitrogen in inorganic samples by inert gas fusion in an impulse furnace with temperatures in excess of 3,000 °C. The ELEMENTRAC ON-p guarantees precise and fast sample analysis. The analyzer covers a wide range of applications such as metal, ceramics and other inorganic materials. The ELEMENTRAC ON-p can be supplied with up to two infrared cells with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you