Soil Gas Monitoring Equipment For Soil And Groundwater Available In Central African Republic
-
PremiumManufactured by AMS, Inc.based in USA
The 9520-D (Diesel) PowerProbe runs off of a 60 hp liquid-cooled, turbo-charged diesel engine. It comes standard with a 350 ft-lb hydraulic hammer for direct push, groundwater, soil gas, and remedial injection type sampling. Like the 9520-VTR, this model can also be equipped with our 4,000 ft/lb auger motor and 3,000lb winch assembly. This model comes standard with an 80” probe stroke that ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Lost or expendable tips are widely used by the geotechnical industry for numerous reasons, such as the placing of piezometer standpipes for groundwater profiling, soil gas, grouting, ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS 6-inches (152mm) Gas Vapor Implant Installation Kit are used for permanent soil gas monitoring, UST monitoring, groundwater sampling, air sparging, vapor extraction monitoring, and as a pressure measurement point in vacuum testing. This kit allows a user to obtain or collect a soil gas sample by positioning or placing a 6” implant in the subsurface, and subsequently withdrawal a sample ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily and economically sample soil gas vapors at shallow depths for preliminary testing. The AMS "original" gas vapor probe can take vapor samples in soils to depths of 12' depending on soil conditions. This kit is an excellent choice for shallow gas vapor sampling in soft soil. The kit includes a base section with a probe tip and soil gas access holes above. An included liner rod with tip is ...
-
PremiumManufactured by AMS, Inc.based in USA
Sample for volatile organic and inorganic compounds from beneath floor slabs. Sub-slab sampling and routine monitoring has become an integral part of vapor intrusion investigations. The AMS Sub-Slab Gas Vapor Probe Kit provides a semi-permanent probe, designed to allow repeated sampling over time in order to assess the potential of contaminated vapor intrusion from beneath buildings and offers an ...
-
PremiumManufactured by AMS, Inc.based in USA
Soil gas sampling and monitoring with direct push methods are commonly used with soil gas surveys for the investigation of volatile organic compounds. AMS offers soil gas sampling systems with several options to allow sampling for a wide variety of regulatory and standard ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Series 2600 system allows the analysis of ultra-trace levels of total mercury in laboratory prepared environmental samples (water, biota, soil, sediments, gas cartridges, effluents and more). It offers unparalleled sensitivity and flexibility for those who require truly sensitive total mercury analysis. The Series 2600 is capable of providing a fully automated implementation of EPA ...
-
PremiumManufactured by AMS, Inc.based in USA
Add Torque to your Gas Vapor Probe system!.The heavy-duty gas vapor probe kits have all of the components included in the regular GVP kits, but with the added benefit of flighted augers which allow you to penetrate rocky and hard soil conditions. The kit comes with enough flighted extensions to pre-bore a hole to a depth of 9 feet! The heavy duty GVP kits also come with a larger 2 1/2” ...
-
PremiumManufactured by AMS, Inc.based in USA
Probe up to 20' with extensions!: AMS extendible tile probes are made from high carbon stress relieved steel and are not plated. Designed for probing depths of 12' or more, they may also be used to prepare holes for insertion of small diameter soil or or gas vapor probes. At deeper depths, use an AMS slide hammer or compact slide hammer. Tile Probe Complete Includes: Base extension (3' or 4' ...
-
PremiumManufactured by AMS, Inc.based in USA
Fluoropolymer Tubing and Polythylene Tubing are used with AMS Retract-A-Tip, the AMS dedicated tip, AMS Gas Vapor Probe Kits, and vacuum pumps for collecting soil gas ...
-
PremiumManufactured by AMS, Inc.based in USA
Direct Push Drilling Technology allows for a wide variety of direct push tooling and instrumentation to be advanced into a subsurface lithology using the static weight of the rig, hydraulic down pressure, and rapid hydraulic hammering. Direct Push Tooling is used to perform soil, soil gas, and groundwater sampling. It is also used for soil remediation, and geotechnical sampling and testing. Many ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil gas analysis can yield a lot of information concerning the soil environment. Using a ‘piercing probe’ and an oxygen content meter the growing conditions for shrubs and trees can be defined. And who would not want to be able to measure the extent of soil pollution in an area without timeconsuming soil ...
-
PremiumManufactured by AMS, Inc.based in USA
Prevent cross contamination with a cased access hole. The portable AMS Hollowstem auger kit provides the tools needed to reach a 6' depth. The augers cut a 3' diameter hole and have an ID of 1 1/8', making them suitable for soil, soil gas and groundwater sampling through a cased hole. A special Hollowstem soil probe, 7/8' OD by 24' long with slide hammer is included to allow collection of a soil ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS offers Hand Vacuum Pumps and Electric Vacuum Pumps to assist in soil gas and groundwater sampling. The Hand Vacuum Pump allow for samples to be taken into suitable test containers at sites where electricity is not accessible. They have a vacuum gauge release valve and fittings. The 12-volt Electric Vacuum Pump includes a 15 foot ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Vapor Implants have double woven stainless steel wire screens with a .0057-in. (0.15mm ...
-
PremiumManufactured by AMS, Inc.based in USA
Designed to be driven into the soil, opened for sample extraction, and removed for subsequent use. The AMS Retract-A-Tip is a survey tool for collection of discrete soil vapor samples below the ground surface, usually at discrete depths. The sampler is 300 series stainless steel, with a 400 series stainless steel drive tip. It may be driven to the sampling depth using an AMS slide hammer or ...
-
PremiumManufactured by AMS, Inc.based in USA
Install as permanent sample point, or leave in ground as a disposable point. AMS dedicated gas vapor tips are used for detecting hydrocarbon spills, underground storage tank and pipe leaks, landfill contamination and hazardous waste sites. Soil gas monitoring with the AMS dedicated gas vapor tip is easily accomplished using an available AMS gas vapor probe ...
-
PremiumManufactured by AMS, Inc.based in USA
Excellent for monitoring and sampling hydrocarbon spill sites, underground storage tanks and pipelines. AMS GVP kits use an AMS slide hammer or an electric rotary drive hammer and GVP drive extensions to insert a stainless steel GVP tip to the desired sampling depth. Fluoropolymer tubing is attached to a barb fitting on the GVP tip for remote sampling from the surface. Two GVP tips are available ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
SurfMoG: unsaturated zone, soil gas up to 1 m depth is an IoT tool for gas monitoring in the unsaturated zone down to a depth of approximately 1 metre with the following features: ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
In many land use systems all over the world soil deformation is a major problem due to increasing land use intensity. On arable soils machine traffic is continuously intensified with respect to load and wheeling frequency leading to (sub-)soil compaction and deeper soil degradation concerning hydrologic or pneumatic functions. Altered soil functions, in particular reduced hydraulic conductivities ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you