Soil Mixing Services For Soil And Groundwater Available In Washington
-
based in USA
August Mack provides complete and innovative remediation services for addressing contaminated sites and assists clients in all areas of waste management for RCRA, TSCA and non-hazardous wastes. All August Mack personnel have completed 40 hours of hazardous waste operations health and safety training in accordance with Occupational Safety and Health Administration (OSHA) regulations to participate ...
-
based in CANADA
Soil Mixing technology is the latest generation of soil mixing, injecting and mixing binding agents (generally cement) with the aid of water and air with in-situ soils to produce a final hardened product. Once cured, these mixed soil/cement elements are capable of supporting soils and retaining groundwater for deep excavations, environmental cut-off walls or carrying structural ...
-
based in AUSTRALIA
On site treatment is a massive cost saver. If your environmental waste requires disposal, then trucking and landfill charges can be exorbitant. But what if after on site treatment, the quantity of waste sent for disposal substantially reduces, and what if that contaminated waste was converted into a benign waste that can be accepted at any general waste tip. Our experience is that with on site ...
-
by ENTACT, LLCbased in USA
The industry utilizes a number of different acronyms to describe vertical auger mixing including: DSM (Deep Soil Mixing), SAM (Single Axis Mixing), or ISS (In-Situ Solidification/Stabilization). ENTACT performs soil mixing with large diameter augers (typically 3 to 12 ft in Diameter) equipped with mixing paddles and grout ports. As the auger is advanced into the ground, grout is pumped through ...
-
based in SWEDEN
In current projects, Envytech is stabilizing PFAS-contaminated masses by using Rembind Plus. The treatment takes place at an adjacent landfill where the masses are mixed with Rembind Plus and are to be deposited after stabilization. All in accordance with the environmental authority guidelines. This alternative is economical in relation to other available treatment methods and in cases where the ...
-
based in FRANCE
Former industrial sites often involve pollution transfer through groundwater. In these cases, removal or control of the sources is insufficient and action on groundwater flow is required. Sol environment designs and implements tailor-made solutions in this area, based on its signature techniques and 20 years of project experience in France and ...
-
based in USA
There are various treatment techniques that are available to improve the condition of poor or unstable ground by altering the nature of the soil insitu. For example, where loose sands or man- made fill are encountered, deep densification methods can be used to increase the density of the material to a degree that allows for construction of shallow foundations or, in the case of loose sands, ...
-
based in USA
DeepEarth Technologies, Inc. (DTI) is an environmental restoration company specializing in providing Cool-Ox® technology for cleaning up contaminated soils and groundwater. Cool-Ox® has been awarded fourteen (14) patents in the US, Canada, Europe and Australia. The Cool-Ox® process is designed to eliminate a wide variety of contaminants including petroleum hydrocarbons, chlorinated organics ...
-
based in CANADA
Jet Grouting creates in-situ columns of grouted soil using very high pressure grout injection. Grouting is performed by pumping high velocity jets of grout (or sometimes grout and air or grout, water and air) through the side of a grout monitor, attached at the end of the drill string. The jets erode and mix the soil as the drill string and the monitor are being rotated and ...
-
based in USA
At CRG Texas, our primary focus is to help clients navigate the complex challenges associated with environmental contamination. We work closely with businesses, industries, government agencies, and communities to identify areas where contamination exists, evaluate the extent and severity of the contamination, and develop effective remediation ...
-
based in CANADA
Heavy metals and organic contaminants can pose risks to the environment through migration and leaching from soil into surface water or groundwater. They can also be taken up by plants and vegetation. Stabilization and Sequestration supports the use of risk based remediation by amending soils to capture or bind the contamination in place and prevent exposure. Our unique solutions ensure that the ...
-
based in USA
BEI offers timely and experienced service for release remediation using a variety of approved methods, including; dig and haul, bioremediation Land Farming and Air-Sparging.Dig and Haulis the excavation and removal of hydrocarbon-contaminated soils,and transported an approved disposal facility. The process includes backfilling, compaction, and site reclamation.to approved disposal facilities. ...
-
based in USA
August Mack provides complete and innovative remediation services for addressing contaminated sites and assists clients in all areas of waste management for RCRA, TSCA and non-hazardous wastes. All August Mack personnel have completed 40 hours of hazardous waste operations health and safety training in accordance with Occupational Safety and Health Administration (OSHA) regulations to participate ...
-
based in USA
Complex solutions for any remediation project. Engineering, and construction-support lines, are essential service components of any natural, remediation project. NRC is a leading provider of geotechnical solutions, and provides an impressive suite of structural and excavation-support services. Our scope of installation and operational specialties includes the installation of slurry and reactive ...
-
Manufactured by Elcan Industriesbased in USA
Toll Blending, or also referred to as contract blending or a blending service, is a turn key solution where companies dropship their raw materials to us and we take your formula and turn it into finished product that is ready for shipment according to your ...
-
based in USA
Ceres Environmental Services, Inc. operates wood waste recycling facilities located in Minnesota and Texas. These operations take in wood waste from tree services, land clearing companies, and local citizens. Through a mechanized reduction process, some of the wood waste is manufactured into organic mulches, and some is composted and aged over time into flowerbed mixes and soil ...
-
based in USA
SSTT provides treatment for heavy metals contaminated soil. We use patented field-proven methods that allow for cost-effective disposal or safe on site reuse. Reagents can be added directly into the soil and mixed with either excavators of specialized blending equipment. This process ensures proper reagent contact and dispersion. In another option, soil is first excavated and stockpiled in a ...
-
based in USA
Geosyntec provides nationally recognized expertise and specialized geotechnical and geological engineering (geoengineering) services to evaluate and improve the design and construction engineering properties of soil and rock foundations. Our geoengineering specialists form one of the leading practices in the United States. They are recognized for their ability to develop practical guidance, and ...
-
based in USA
ORIN’s chemical remediation approaches apply in situ and ex situ processes that cost-effectively reduce contaminants to site or regulatory levels or nonhazardous to meet the Toxicity Characteristic Leaching Procedure (TCLP) requirements and Universal Treatment Standards (UTS). These chemical processes include chemical oxidation, bioremediation, metal stabilization, and reductive ...
-
Manufactured by Allied International Speciality Chemicalsbased in USA
We offer custom blending, chemical mixing, and toll blending to provide your company with the solution to its chemical needs. We have experienced lab technicians and chemical blenders that specialize in compounding, formulating and manufacturing specialty chemicals for many industries. We have an in-house laboratory that maintains high standards of quality control. Our facility has an extensive ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you