Soil Monitoring Equipment For Soil And Groundwater Available In Serbia
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The typical design of the Edelman auger allows for a minimum of friction during penetration into the soil, and the extraction of the auger from the soil, which means less physical effort. To achieve optimal results, the auger type should be chosen in respect of the soil type in question. ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
HDPE, PTFE, Clear Poly and PVC Bailers. Save time in the field and work smarter by using Single Sample Disposable bailers. SingleSample disposable bailers eliminate field cleaning and cross contamination. Features include an improved top and stainless steel weight design so they fill and empty as fast or faster than any other bailer on the market plus our patented, Dome Design top and bottom to ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS 2" flighted auger kit is equipped to drill access holes up to 9' deep. The included 1 1/2" x 6" soil core sampler may then be used to collect soil samples in liners. Additional extensions may be added to obtain deeper depths. Kit Includes Bosch 11245, 5/8" threaded male to SDS Max adapter, 1 1/2" x 6" soil core sampler, slide hammer, 2" flighted lead auger with hard surfaced tip, 2" ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS multi-stage sludge sampler, multi-stage sludge core tip, 12" multi-stage SCS base, three 12" multi-stage SCS sections, three 4' extensions, plastic liner, plastic end caps, 2" soil core catcher, universal slip wrench, two crescent wrenches, SST cross handle, slide hammer, and the AMS deluxe carrying ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Grass plot sampler large, Ø 23 mm, operational length 10 cm, total length 95 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Core cutter method, according to Dutch RAW-standard 2010, test no. ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Capel-105M is a capillary electrophoresis system for fast and effective solutions in food industry, environmental applications, pharmaceutical and chemical industries, biochemistry and forensic ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With these sets, with bayonet connection, undisturbed soil samples can be taken in a liner applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push/pull handle. The set contains, among other things: a hand auger for pre- and clean drilling of the bore hole, the core sampler with the sampler tubes, the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Determination of the shear strength of a soil is a commonly used method to determine the structural strength of that soil. The electric vane tester is an excellent field instrument for in-situ measurement and evaluation of the undrained shear strength (su) and the remoulded shear strength. Furthermore it gives a good indication of the over-consolidation ratio, the stress-strain relationship and ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Cross Handles are connected to AMS extensions – which are then connect to AMS augers and other samplers. AMS 18in and 22in rubber-coated handles are made of chromoly and are coated with textured rubber. The 18in rubber-coated handles are available with signature series, 3/4in threaded, 5/8in threaded, and quick connect connections. 22in models are only available with a 3/4in threaded ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
In many land use systems all over the world soil deformation is a major problem due to increasing land use intensity. On arable soils machine traffic is continuously intensified with respect to load and wheeling frequency leading to (sub-)soil compaction and deeper soil degradation concerning hydrologic or pneumatic functions. Altered soil functions, in particular reduced hydraulic conductivities ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With these sets, with conical screwthread connection, undisturbed soil samples can be taken in a thin walled tube applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push-/pull handle. In hard soils the sampler tube can be driven into the soil using the hammer with two nylon heads (shock-absorbing) or ...
-
PremiumManufactured by AMS, Inc.based in USA
All stainless steel for environmental sampling. Used in soils with low levels of contaminants or where equipment will be cleaned using an acid bath technique. Contains the same components as the basic kit but in all stainless. Includes: Regular, sand and mud augers, cross handle, split soil core sampler, slide hammer, three 4' extensions, plastic liner, plastic end caps, wrenches, and cleaning ...
-
PremiumManufactured by AMS, Inc.based in USA
One-Piece Mud Augers are powder-coated (black) for rust resistance and come equipped with an 16" rubber-gripped cross handle. This lightweight (4 to 5 lbs) one-piece wet soil auger is an inexpensive alternative to our mud auger, extension, and cross handle system for anyone needing to dig holes less than 4'. The complete mud auger set up is 53" in length. It has carbon steel auger bits that are ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS professional soil sampling kits are designed for soil sampling professionals who want the strongest, most durable connection on all of their new and imporoved augers, extensions, cross handles, slide hammers, and split-core samplers. They are AMS's newest and most impressive soil sampling kits to date. AMS professional series sampling kits come with 3/4in threaded professional regular auger ...
-
PremiumManufactured by AMS, Inc.based in USA
The 2" X 12" Multi-Stage Soil Core Sampler Complete collects an approximate 2" diameter undisturbed core sample down to 48" deep when optional extension sections are attached. This sampler has an outside diameter of 2-3/8" and accepts a 2" liner. The cap, sampler base, extension section, and auger tip are constructed of 300 series stainless steel (SST). The core tip is constructed of 400 series ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Monitoring well pipes are used to compose monitoring wells and piezometers. Monitoring well pipes are available in different materials and diameters, and are supplied in PE ...
-
PremiumManufactured by IMKO Micromodultechnik GmbHbased in GERMANY
PICO-PROFILE: Easy and modular to configurate. TRIME radar technology supports a precise measurement of moisture and salinity in selected soil profiles. The technology is ideal to control irrigation, to create soil and water balance models and to check the saline load in different soil ...
-
PremiumManufactured by CETCObased in USA
CETCO COATED TABLETS are coated using an aqueous carrier to apply the coating. These untreated organic tablets are compressed into 1/4” (0.64 cm) and 3/8” (0.95 cm) sizes. CETCO COATED TABLETS are certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
Measuring tube made of HPVC, telescopic coupling made of brass with high-precision conical measuring stop. Option: Water pressure-tight measuring tubes (double O-ring seal). Used for high-precision measurement axial displacement measurements in soil, rock and in boreholes in concrete ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you