Soil Monitoring Equipment For Soil And Groundwater Near Bosnia & Herzegovina
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
OCMA-550 to measure residual oil on components and concentrations of oil adhered on solids such as soil. Measurement can be easily made only by injecting the extracted water sample into the attached cell and setting it to the equipment. This model features a simple design which allows opening/closing of the door to setting of cell with just one hand. This is best for measurement of extracted ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Wet sieving method, complete set to determine the aggregate stability of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Without too much effort the gouges can be extracted from the soil by using rod pullers, which can be provided in different designs. The first gouge can easily be extracted using a rod puller fitted with a rod puller extension system (art. no. 04.18.07.05). If the gouge still is partially stuck in the top soil, then it can be removed using a lifting jack (art. no. 05.07.03) with lever and chain ...
-
based in UNITED KINGDOM
The Micro-Chamber/Thermal Extractor™ (µ-CTE™) is a versatile and compact unit with up to six small cylindrical chambers that enables the sampling of chemicals released from products or materials. Released volatile and semi-volatile organic compounds (VOCs and SVOCs) are collected onto sorbent tubes for analysis by TD–GC–MS. 4 inert micro-scale chambers (114 mL) - ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil sampling and classification set, standard set to a depth of 2 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This bi-partite gouge auger distinguishes itself from other gouges by the cylindrical tapered cutting head at the bottom side of the gouge that, when the auger is pushed into the soil, cuts a cylinder shaped piece from the soil. As a result the auger does not need to be revolved around its axis after being inserted, as the other gouge augers need to be (less sensitive to torsion). The tapered ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The air pycnometer is supplied as a complete set, including a calibration block. The apparatus is suited for sample rings with a maximum diameter of 53 or 60 mm (max. height 51 resp. 40 mm). The instrument has a measuring range of 0-115 cm3. The time period of the measurement is approximately 1 minute. The maximum measuring accuracy equals ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Thetaprobe soil moisture measuring set. Complete standards set consisting of soil moisture meter (read-out unit), Thetaprobe sensor, adjusting block for installation of sensor, set of 12 pieces spare pins for sensor and carrying case. Warranty 5 years. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Flap gouge auger for depth specific samplings in dry or wet material, standard set to a depth of 2 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The filter apparatus, suitable for field and laboratory, has a net filtration area of 130 cm2. The medium to be filtered only has contact with the chemically inert teflon. The rest of the apparatus consist of stainless steel. If the proper filter membrane is used, very agressive fluids and gasses can also be filtered. The filter apparatus can be connected in-line to a peristaltic pump, nitrogen ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The typical design of the Edelman auger allows for a minimum of friction during penetration into the soil, and the extraction of the auger from the soil, which means less physical effort. To achieve optimal results, the auger type should be chosen in respect of the soil type in question. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sample ring kit model E, with heavy duty sample ring holder for sampling in hard soils. Standard set for a depth of 2 m. For soil sample rings Ø 53 mm. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Core cutter method, according to Dutch RAW-standard 2010, test no. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Pocket vane tester for measurement up to 250 kPa (2,5 kg/cm2). The pocket vane tester is a shear strength measuring tool that is used in profile pits or on the surface. The small, practical format also makes the tool very suitable for testing on soil samples. The short period of time the test takes allows for several measurements in the same soil or layer which in turn allows for the calculation ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard bailer boring auger set is suitable for augerings to a depth of about 7 meter. The set is very suitable for in addition to exploratory soil augering and sampling inserting monitoring well pipes for groundwater level measurements and for sampling. This compact set can be carried easily in a station car and is easy to use in the field. It can be used by one person. The set contents ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
A tripod is an essential part of a bailer boring set (cable tool drilling equipment). Also drillings at greater depths, or the application of heavier augering or soil core sample equipment require the use of a tripod. In selecting a tripod, working height, weight, and maximum load capacity (= tensile force) are usually determinant factors. However, the range of application is of such a magnitude, ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Drilling a bore hole is often combined with sampling and describing a profile. If both these activities are not necessary during the drilling procedure then drilling can be executed fast and efficient applying the so-called lost cone drilling method. Eijkelkamp Soil & Water developed a manually controlled set using an electrical percussion hammer to hammer the lost cone and the accompanying ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Van der Horst core sampler. Set for sampling to a depth of 7 ...
-
Manufactured by Geokon Incbased in USA
The Model 3400 Semiconductor Piezometers and Pressure Transducers are intended for dynamic measurements of fluid and/or pore water pressures in standpipes, boreholes, embankments, pipelines, pressure vessels, reservoirs, etc. They are also used for static pressure movement where the readout system is incompatible with vibrating wire type transducers. Three transducer output options are ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The "pocket penetrometer" is specifically used to determine the penetration resistance of top layers (measuring depth 5 mm) and of samples in the field or in the laboratory. Measuring range 0.5 MPa. When pushing the instrument into the ground, the pin encounters a force of the ground. The spring is compressed by this force. A slip ring is taken along during this operation, which shows on the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you