Only show results in Virginia? Ok

Thermal Remediation Applications

  • Thermal Remediation in Fractured Rock

    Thermal Conduction Heating (TCH) is applicable in fractured rock and other complex formations such as: Tight and fractured clays,
    Saprolite, Shale, Sandstone, Limestone, Dolomite, Fractured igneous and metamorphic rock, Permeable basalt, Karst limestone.

    By TerraTherm, Inc. based in Gardner, MASSACHUSETTS (USA).

  • Thermal Remediation Inside & Near Buildings & Infrastructure

    In Situ Thermal Remediation (ISTR) Beneath and Around Existing Buildings and Infrastructure; In Situ Thermal Remediation (ISTR) technologies, including In Situ Thermal Desorption (ISTD), the Electro-Thermal Dynamic Stripping Process (ET-DSP™), which is an advanced form of electrical resistance heating, and Steam Enhanced Extraction (SEE) have been demonstrated effective in treating source zones with limited access and those adjacent to or beneath buildings and other infrastructure.

    By TerraTherm, Inc. based in Gardner, MASSACHUSETTS (USA).

  • Drill Cuttings Remediation

    With a VulcanĀ® Systems Thermal Desorption Unit, Hydrocarbons are separated from the solids in the sludge. The treated solids have little to no residual hydrocarbons, resulting in an end product that can be disposed of easily and cost-effectively. What makes our equipment unique? The ability to recover diesel or oil in a way which maximizes the resaleability of use as a fuel.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • Premium

    Electric Resistance Heating (ERH) Remediation

    By TRS Group, Inc. based in Longview, WASHINGTON (USA).

  • Premium

    Boiler Water Testing / Cooling Tower Water Testing

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be determined by the Ryznar or Langlier indices and correlated to a conductivity or TDS range. Most people recognize problems associated with corrosion. Effects from scale deposits, however, are equally important. For example, as little as 1/8` of scale can reduce the efficiency of a boiler by 18% or a cooling tower heat exchanger by 40%!

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Thermal Desorption

    Trilliant Oilfield Services (TOS) operates the largest mobile Thermal Desorption Unit (TDU) in the United States with a throughput of 50 tons per hour of contaminated soil.

    By Trilliant Oilfield Services, LLC. based in Casper, WYOMING (USA).

  • Mercury Removal from Ash

    A by-product from burning pulverized coal in electric power generating plants, fly ash can contain substantial levels of mercury which can negatively impact human health and the environment. Responding to the threat of mercury exposure, the EPA has established tough standards for the power industry to meet. VulcanĀ® Systems Thermal Desorption Units remove mercury from fly ash, making the end product reusable for concrete production. Through this process, power plants are able to create a new revenue stream through the sale of clean fly ash, eliminate expensive disposal costs, and protect the environment. Besides solving the disposal problem, adding fly ash to concrete improves the quality of the concrete. As a replacement for Portand Cement, the use of fly ash saves on material expenses, decreases permeability, and prevents expansion, thermal cracking, and efflorescence. It also increases working time, and makes pumping and finishing much easier.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you