Thermal Soil Remediation Equipment For Soil And Groundwater Near Kyrgyzstan
-
PremiumManufactured by CETCObased in USA
HIGH TC GEOTHERMAL GROUT is a specially blended high solids bentonite that can be mixed with sand in a two-part, thermally conductive grouting material to improve the performance of ground source heat loop applications. HIGH TC GEOTHERMAL GROUT is an easy pumping grout that has been carefully developed to efficiently suspend solids (silica sand) for enhanced thermal conductivity. HIGH TC ...
-
PremiumManufactured by CETCObased in USA
GEOTHERMAL GROUT is a specially blended high solids bentonite that can be mixed with sand in a two-part thermally conductive grouting material to improve the performance of ground source heat loop applications. GEOTHERMAL GROUT is an easy pumping grout that has been carefully developed to efficiently suspend solids (silica sand) for enhanced thermal conductivity. GEOTHERMAL GROUT can be mixed to ...
-
based in CHINA
There is money in oily waste. Our automated oil recovery system reclaims up to 99.7% of the contained hydrocarbons, turning waste into profit. You save money from minimized discharge costs and make money from valuable oil at the same time. Discover the technology behind the zero oil-waste ...
-
based in CHINA
Indirect thermal desorption is the process of indirectly transferring heat to oil-contaminated soil in an oxygen-deficient atmosphere. This way, the hydrocarbons vaporize without degrading in quality. After condensing the oil and water fractions, the effluent sediment is non-toxic (PHC max ...
-
Manufactured by H-Screeningbased in CHINA
Thermal desporption drill cuttings management system was introduced to protect the oilfield area and environment. The goal of any thermal desorption technology is to produce oil-free or ultra-low Total Petroleum Hydrocarbons (TPH) solids for disposal by distilling the oils from cuttings and recovering it to be reused as drilling fluid. The material to be treating including but not limited ...
-
Manufactured by Babcock & Wilcox Vølund ABbased in SWEDEN
Mercury is often emitted from thermal treatment installations during brief periods creating extremely high mercury concentration spikes in untreated flue gases. Many traditional flue gas cleaning systems have limited buffer capacity, which means such concentrations cannot be reduced as much as desired. In such cases, or in applications in which the mercury content in untreated flue gas is usually ...
-
Manufactured by econ industries services GmbHbased in GERMANY
Remediation of hydrocarbon contaminants from oil lagoons and refinery waste; In 2007 econ industries delivered an indirectly heated thermal desorption plant to a client in Kuwait. The plant was designed to treat various types of waste with hydrocarbon contaminant content, in particular refinery waste, oil lagoons and down hole drilling waste. The aim is to recover the waste hydrocarbons from the ...
-
Manufactured by econ industries services GmbHbased in GERMANY
A combination of rising prices for resources and the improvement in technology make treatment of mill scale and grinding swarf an extremely environmentally friendly and economical solution. The first VacuDry® plant for the recovery of oil solvents and metals from sludges began operating in autumn ...
-
based in USA
Remediating the subsurface environment can be a daunting challenge, as subsurface heterogeneity and groundwater flow dynamics make it extremely difficult to contact the contamination with remediation fluids. Further, simply digging it up and hauling it away can be prohibitively expensive. Heating the subsurface essentially eliminates these issues, as we know how to apply heating technologies in ...
-
by Nocon BVbased in NETHERLANDS
The efficiency of in-situ remediation can be strongly limited due to low permeable or heterogeneous lithology's, because many in-situ methods are based at mass transport of gasses and fluids. This mass transport is difficult in low permeable layers and selective in heterogeneous soils. Soil heating strongly effects the kinetics of many organic contaminants like benzene, trichloroethene and ...
-
based in BELGIUM
Thermal Conductive Heating using Smart Burners Technology was specifically developed to solve soil pollution problems and may be the perfect answer in urban ...
-
Manufactured by Global Advantech Resources Limitedbased in UNITED KINGDOM
Drill cuttings arise from drilling exploration wells, new production wells and workovers on producing wells. They contain agglomerates of rock fragments, oils, hydrocarbons, salts, drilling muds and other chemicals, some of which are hazardous and toxic. The chemistry of many modern oil-based drilling muds is formulated to remain stable under the high temperature and pressure conditions present ...
-
Manufactured by Global Advantech Resources Limitedbased in UNITED KINGDOM
-
by Geostream UKbased in UNITED KINGDOM
Fast and Effective Treatment of Lasting Contamination. In-Situ Thermal Remediation is often the most effective treatment for lasting contamination, achieving strict contaminant reduction targets faster than alternative technologies. It works well on sites with complex geologies – such as fractured rock or where there are multiple sand lenses within clays – and on operational ...
-
based in USA
GTR™ is a system that is also used for onsite soil treatment, when the soil is treated on site after excavation (no transportation off ...
-
based in USA
In Situ Thermal Conductive Heating using Gas Thermal Remediation (GTR™) was specifically developed to be the most flexible ISTR platform. ...
-
based in USA
Batch Pile Treatment is one of the most commonly applied methods of Ex Situ Thermal Desorption for the remediation of soils. When soil is heated, the organic contaminants extracted from the soil pile or are destroyed in ...
-
based in USA
GEO’s proprietary Electrical Resistance Heating (ERH) Technology is an intensive in situ environmental remediation method that uses the flow of alternating current electricity to heat soil and groundwater and vaporize contaminants. Alternating electric current is passed through a targeted soil volume between subsurface electrode elements. Operating voltages can be varied to adapt for ...
-
based in USA
Containerized thermal desorption systems for remediation of contaminated soils, sludge, sediments & assorted media. GEO designs, constructs and operates or leases its patented containerized thermal desorption (“CTD”) systems for onsite remediation of contaminated media, including soils, sludge, sediments and mixed waste streams. The CTD systems were designed for crude oil recovery ...
-
Manufactured by Iron Creek Group LLCbased in USA
Enhanced Thermal Conduction (ETC) is a patented onsite thermal process that heats stationary contaminated soil, volatilizes the contaminants, and destroys the off-gases. This design allows for much lower operating costs through higher thermal efficiency, compared to other thermal technologies. It is no longer necessary to relocate petroleum or explosives contaminated soils to landfills. We offer ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you