Water Table Software For Soil And Groundwater Available In Panama
-
based in CZECH REPUBLIC
This program is used to create digital terrain models (DEM, DTM) from inputted points and holes. It calculates volumes of excavation and also serves as task manager for other GEO5 ...
-
based in NETHERLANDS
MicroFEM for Windows is a Finite-Element Program for Multiple-Aquifer Steady-State & Transient Ground-Water Flow ...
-
based in CZECH REPUBLIC
Hydrus-2D is a Microsoft Windows based modeling environment for analysis of water flow and solute transport in variably saturated porous media. The software package includes the two-dimensional finite element model HYDRUS2 for simulating the movement of water, heat, and multiple solutes in variably saturated media. The model includes a parameter optimization algorithm for inverse estimation of a ...
-
based in USA
SVSlope represents the new standard in slope stability analysis. Users can perform classic limit equilibrium slope analysis by the method of slices or newer stress-based methods. Advanced searching methods are implemented to correctly determine the correct location of the critical slip surface. SVSlope is characterized by an advanced probability analysis as well as integration with other packages ...
-
based in ROMANIA
Software used for Dynamic Penetration Tests, that is the reading, recording, interpretation, storage and the management of any type of penetrometer including new or custom equipment and of in borehole SPT readings. Dynamic Probing provides functions for the archiving of readings by site and for automatic calculation of the real energy transmitted, including correction for warp and the correlation ...
-
based in CZECH REPUBLIC
This program, based on the finite element method, can model and analyze a wide range of geotechnical problems, including terrain settlement, sheet pile/diaphragm walls, slope stability, excavation analysis. It offers several material models for soils and a variety of structural elements such as walls, anchors, geotextiles or geogrids. The GEO5 FEM is used to compute displacements, internal forces ...
-
based in ITALY
This program perform all the function of the Isomap package and can be considered as it extension. Most of the complex problems related to ground-water modeling can be solved with INQUIMAP. It allows the geometric modeling of the water table and the insertion of one or several wells, flooded areas, barriers and impermeable barriers, recharge points and variations in permeability. The obtained ...
-
based in USA
FLAC, Fast Lagrangian Analysis of Continua, is numerical modeling software for advanced geotechnical analysis of soil, rock, groundwater, and ground support in two dimensions. FLAC is used for analysis, testing, and design by geotechnical, civil, and mining engineers. It is designed to accommodate any kind of geotechnical engineering project that requires continuum analysis. FLAC utilizes an ...
-
by Rocsciencebased in CANADA
Settle is a three-dimensional program for the analysis of vertical consolidation and settlement under foundations, embankments and surface loads. The program combines the simplicity of one-dimensional analysis with the power and visualization capabilities of more sophisticated three-dimensional ...
-
based in USA
What is the best software for pumping test analysis? In a recent LinkedIn poll, groundwater professionals overwhelmingly chose AQTESOLV as their preferred pumping test analysis software. AQTESOLV is advanced software for pumping test data analysis that features the most comprehensive set of solution methods for confined, leaky confined, unconfined and fractured ...
-
based in CZECH REPUBLIC
This program is used to perform slope stability analysis (embankments, earth cuts, anchored retaining structures, MSE walls, etc.). The slip surface is considered as circular (Bishop, Fellenius/Petterson, Janbu, Morgenstern-Price or Spencer methods) or polygonal (Sarma, Janbu, Morgenstern-Price or Spencer ...
-
based in USA
Complete Analysis & Design Of Shallow Foundations: Bearing Capacity, Stability Analysis & Reinforcement Design.SoilStructure SHALLOW FOUNDATION, version 3 removes the pain of using calculators in the analysis and design of footings. Spreadsheets are hard to preserve and it is time consuming to do all the stability and reinforcement design using in house tools. This spread footing software ...
-
based in USA
FLAC/Slope is a special, streamlined version of FLAC for evaluating the factor of safety (FoS) of soil and rock slopes in two dimensions with simple and fast model setup and analysis execution. FLAC/Slope can simulate stability problems under a wide variety of slope conditions, including: arbitrary slope geometries, multiple layers, pore pressure conditions, heterogeneous soil properties, surface ...
-
based in USA
SVFlux is designed to model seepage and groundwater in soils. It is a 1D, 2D, axisymmetric and 3D finite-element program for calculating saturated and unsaturated groundwater flow. The package represents powerful and stable finite element groundwater modeling software including climatic coupling. Our CAD-based front end and automated solver allow you to spend time solving your problem, not ...
-
based in USA
MINEDW is a three-dimensional (3D), finite-element, groundwater flow program that was developed specifically for mining applications. MINEDW is used worldwide to design dewatering or depressurization systems, predict local and regional environmental impacts of mine dewatering, assist in the design of water-supply systems, simulate the infilling of a “pit lake” after mining ceases, and ...
-
based in CANADA
MODFLOW-SURFACT is one of the most comprehensive flow and transport models available. Built around the MODFLOW code, MODFLOW-SURFACT includes advanced computational modules that are based on robust, efficient, mass-conserving algorithms making it faster and more accurate than its transport modeling ...
-
Manufactured by Encardio-Rite Electronics Pvt. Ltd.based in INDIA
Encardio Moniterra Group unveils a new era of sustainable structural deformation monitoring. With over 50 years of experience assimilated in one unique application for deformation monitoring using laser scanning data, OPSIS is the brilliant software that is going to redefine monitoring philosophy - a true game ...
-
based in USA
AQTESOLV is used for the design and analysis of aquifer tests, including pump test, step-drawdown tests, variable-rate tests, recovery tests, single-well tests and slug tests. AQTESOLV offers sophisticated options for a vast array of aquifer test solutions for confined, unconfined, leaky and fractured aquifers, ...
-
based in USA
SVSolid is designed for solving the stress state and deformations in soils under various loading conditions. It is a 1D, 2D and 3D finite-element program for engineering soil mechanics computations. SVSolid simulates the behavior or soil or rock which may undergo elastic or plastic deformations. SVSolid may also be coupled with our groundwater flow or slope stability ...
-
based in CANADA
The WinLoG version 5 extension module of StrataExplorer can be used to quickly and easily create, edit and print boring and well logs for a variety of industries. The module is a major upgrade to our very popular WinLoG version 4 program. WinLoG is used by more than 3000 firms in more than 80 countries worldwide. The geotechnical version of this module has been specifically designed for the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you