Water Well Monitoring Equipment For Soil And Groundwater In Africa
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
To protect monitoring wells (and piezometers) against traffic, destruction, contamination and weather effects, various protective materials are ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Vectran cable, Ø 1.6 mm, length per m. For installation of Diver in corrosive water. Fixing on monitoring well ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard bailer boring auger set is suitable for augerings to a depth of about 7 meter. The set is very suitable for in addition to exploratory soil augering and sampling inserting monitoring well pipes for groundwater level measurements and for sampling. This compact set can be carried easily in a station car and is easy to use in the field. It can be used by one person. The set contents ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Vectran cable, Ø 1.6 mm, length 50 m. For installation of Diver in corrosive water. Fixing on monitoring well ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Submersible probe – piezo-resistive stainless steel measurement cell. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement in clean to slightly polluted liquids. With piezo-resistive stainless steel measurement ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Diameter 19 mm – ideal for deep wells. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement. Suitable for measurements in deep wells through small diameter of only 19 mm. With piezo-resistive stainless steel measurement ...
-
Manufactured by ICE WATER MANAGEMENTbased in FRANCE
Reverse Osmosis (RO) technology is used to demineralise water, in a non selective, physical process. This technique allows to remove minerals (cations and anions), and colloïds from raw water. The RO unit, heart of your water treatment unit, is designed for adjusting water composition to your target. The unit is adapted to the quality of your raw water as well as the level of automation of ...
-
Manufactured by Sitelab Corporationbased in USA
UVF-Trilogy analyzer includes GRO UV module used to detect Gasoline Range Organic Hydrocarbons, including benzene and other volatile petroleum compounds in the C6 to C10 carbon range. The analyzer is factory calibrated using Sitelab's GRO calibration kits for testing soil or water. This test matches well to U.S. EPA and other regulatory methods for GRO, VPH, BTEX or VOCs using Gas ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
Service rig used for rehabilitation of water wells, cleaning, fishing, pump testing and bore hole washing. The rig can be supplied with various optional based on the customer's specific requests. All the accessories needed for completing the well can be mounted onboard. Among the numerous optional there is the electrical generator, the welding machine, the air compressor, water and foam pump. The ...
-
Manufactured by Eno Scientificbased in USA
Understanding your well water levels has never been more important than it is today. Whether you live in an area affected by record breaking drought, fracking or you are concerned about over use in your community. These units can give you piece of mind by providing you with the ability to monitor current, real time levels or trends in usage and level patterns. These units are the perfect ...
-
Manufactured by Eno Scientificbased in USA
The Well Sounder 2010 PRO is a sonic water level meter, designed and manufactured by Eno Scientific, to measure static water level in wells, piezometers or boreholes. This portable handheld unit uses sound waves to measure the distance from the top of the well to the water level. This eliminates the need to lower anything into the well. Unlike standard water level tapes these acoustic meters are ...
-
Manufactured by Bruker Corporationbased in USA
The HYPERION is the culmination of more than 25 years of experience in FT-IR microscopy. Its high-quality design, including all optical, mechanical, and electronic components, provides high stability and reliability. Featuring many contrast enhancement tools, a wide variety of dedicated objectives, and chemical imaging, the HYPERION enables you to conduct the most sensitive microanalysis easily ...
-
Manufactured by Eno Scientificbased in USA
The Eno Scientific WS131 Flow Meter is designed to measure water flow for monitoring well drawdown and usage. It uses a modular design consisting of a PVC housing and an electronic sensor module that easily attaches to the housing using a hand tightened ring nut. With the sensor in place, electrical pulses are generated as water moves past the paddle wheel which can be interpreted as water volume ...
-
Manufactured by Industrial Test Systems, Inc.based in USA
Well Water Check Home Test Kit offers a broad range of concentrations that can be measured using this four part water quality test. Accurate results are obtained in under one minute for Iron, Total Hardness, pH, and Nitrate Nitrogen/Nitrite Nitrogen, making the new test kit ideal for the wastewater and processing industry, as well as for home use. Foil-packed strips are packaged in a clamshell ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
A versatile spectroscopic ellipsometer covering a range from VUV to NIR.The UVISEL 2 VUV is a new generation of phase modulation ellipsometer for VUV measurements. It is the only spectroscopic ellipsometer on the market designed to deliver the fastest thin film measurements over the largest wavelength range, from 147 to 2100 ...
-
Manufactured by HERON Instruments Inc.based in CANADA
Heron's top selling water level meter, #1 for accuracy, reliability and value. The dipper-T water level meter has been designed to provide a long and reliable service life; we back up our claims with a 5-year warranty. Accuracy begins with a top quality, heavy duty tape. Each tape is tested by the manufacturer to ensure compliance with appropriate ASME standards. These tough tapes have a breaking ...
-
Manufactured by Industrial Test Systems, Inc.based in USA
Every industrial, commercial or natural water source contains dissolved solids or salts. These impurities contribute to the scaling and corrosion of equipment, affect industrial and commercial processes and contribute to poor taste and other deficiencies in drinking water. Obtain reliable digital measurements of your water source with this affordable conductivity meter from ITS. Ideal for water ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The 101D Water Level DrawDown Meter has all of the same qualities as our well-known 101 P7 Water Level Meter, with the added feature of a drawdown mode. One simple toggle switches between static water level and drawdown measurements. Water level mode allows accurate depth to water measurements in wells, boreholes, standpipes and tanks. The drawdown function is used to monitor falling hydraulic ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The Model 201 Water Level Temperature (WLT) Meter is ideal for measuring static water levels, as well as profiling temperature in wells, boreholes, tanks and open water. Accurate temperature measurements are clearly displayed on an LCD readout on the faceplate, from -20ºC to +125ºC. Water level and probe depth measurements are read off the Solinst durable laser marked flat tape. Tape ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you