Well Casing (Water Wells) Equipment Near Slovakia
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard set for pF-determination pF 0 - 2.0 (0 - 0.1 bar) consists of the sandbox with control panel, suction levelling stand, water supply bottle with stand, filter cloth (140-150 micron), a number of containers synthetic sand, grain size approximately 73 micron and various ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The Easy Bolt provides the function of conventional nuts and bolt sets, but uses a simple lever action instead of wrenches. The Easy Bolt fits through the flange bolt holes and is tightened by simply pushing the cam lever down. Easy Bolts are constructed of high quality stainless steels, with an investment cast ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Well Wizard pumps for MicroPurge low-flow groundwater sampling systems come in an unsurpassed range of sizes, materials, and capabilities, including models for deep sampling wells, narrow or obstructed casings, and small-volume pumps for low-yield monitoring wells. Together with MicroPurge controllers, flow cells, and ...
-
Manufactured by QED Environmental Systems, Incbased in USA
sampling with advanced logic control of purge flow and well drawdown. Simple up-down arrow keys increase and decrease purge flow to meet low-flow requirements. Once optimized, settings can be easily recalled in the next round of ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Prevent Common Regulatory Emissions Violations with Membrane Seal. Landfill well casing and wellbore can be a significant source of surface gas leaks and air intrusion. These potential problems frequently result from landfill settlement around well casings and cracking along the well ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Pull pumps faster from landfill and remediation wells to reduce downtime and increase productivity while protecting field personnel from injury. Removing pumps from landfill gas, leachate or groundwater remediation wells for cleaning or maintenance can be time-consuming, awkward and physically demanding. QED’s Pump Pull E™ ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Limiting drawdown is one of the basic requirements of proper low-flow sampling. The MicroPurge® MP30 (U.S. Patent Number 6,456,201) Drawdown/Water Level Meter provides a unique and simpler way to assure proper drawdown control. The MP30 switches between two modes- as a drawdown sensor and control when connected to the MicroPurge basics controllers, and as a high quality water level ...
-
PremiumManufactured by AMS, Inc.based in USA
different well casing heights. The units are also fitted with a footage counter. Standard models have a hand crank and reel brake. Hydraulic models includes a 1 HP, 110-volt electric driven hydraulic pump motor with a pendant ...
-
Manufactured by ASIO, spol. s r.o.based in CZECH REPUBLIC
A device that is steadily growing in popularity is the automatic grease trap. It is a mechanical grease trap consisting of a plastic or stainless-steel waterproof tank with a system of scum-boards and partitions, supplemented with a system that is capable of automatic or semi-automatic cleaning. It means that sludge can be removed without directly opening the trap. Everything can work simply on ...
-
Manufactured by QED Environmental Systemsbased in USA
The Easy Bolt clamping force far exceeds the requirements for sealing 6" and 8" landfill gas well flanges. In most cases, no more than four bolts are needed to provide the required force in these ...
-
Manufactured by QED Environmental Systemsbased in USA
Eliminate Well Bore Gas Leaks, Air Intrusion and Underground Fires Prevent Common Regulatory Emissions Violations with Membrane Seal Landfill well casing and wellbore can be a significant source of surface gas leaks and air intrusion. These potential problems frequently result from landfill settlement around well ...
-
Manufactured by QED Environmental Systemsbased in USA
need to operate a bladder pump into one easily portable unit. A standard padded nylon case protects the MP15 in transport, provides over-the-shoulder on-site carrying convenience, and even has a hook on the back to let you hang it from the well casing during sampling. The MP15 also includes a bypass fitting, so you can now use one handy unit to ...
-
Manufactured by QED Environmental Systemsbased in USA
Well Wizard Bladder Pumps: The Original, Low-Flow Sampling Standard. Well Wizard pumps for MicroPurge low-flow groundwater sampling systems come in an unsurpassed range of sizes, materials, and capabilities, including models for deep sampling wells, narrow or obstructed casings, and small-volume pumps for low-yield monitoring ...
-
Manufactured by HERON Instruments Inc.based in CANADA
The Conductivity Plμs Level and Temperature Meter enables accurate measurements of conductivity, water level and temperature in wells, boreholes, stand pipes and open bodies of water. The Conductivity Plμs can be used to profile conductivity and temperature to depths of 1000ft ...
-
Manufactured by Van Essen Instruments - part of Nova Metrix LLCbased in NETHERLANDS
The Diver-SDI integrates Divers with SDI-12 remote monitoring systems. A typical SDI-12 system illustrated in the figure below. On one end the Diver-SDI is connected to the SDI-12 system through the 3-wire SDI-12 bus, which also include the power supply of 12 Volt. On the other end a Diver cable (AS2xxx) is attached to connect the Diver-SDI to a Diver. Diver cables up to a length of 500 meters ...
-
Manufactured by HERON Instruments Inc.based in CANADA
The Heron Well Casing Indicator Probe is used for measuring the depth of metal casing in wells and boreholes from 2” diameter and greater. The Heron Well Casing Indicator Probe is a necessary tool when decommissioning wells, installing packers and registering ...
-
Manufactured by HERON Instruments Inc.based in CANADA
The Heron Draw Down meter is an essential tool for low flow sampling, purging and well development. Allow the meter to track the draw down for you. When the probe is no longer immersed in water an alarm sounds and the light on the meter goes off. Use the Draw Down meter to determine flow rates for low flow sampling and to protect your pump ...
-
Manufactured by HERON Instruments Inc.based in CANADA
The dipper-T with Temperature Option will allow temperature profiling as well as measuring the depth of water in wells, boreholes and standpipes. Temperature readings will appear on the digital display read out in the center electronic module. Temperature will read as Degrees C only. The static level of the water will be indicated by a solid ...
-
Manufactured by HERON Instruments Inc.based in CANADA
The SKINNY DIPPER water level meter is equipped with a ¼” probe and a ¼” extruded polyethylene tape that is reinforced with Kevlar, making it ideal for use in narrow tubes and piezometers. ...
-
Manufactured by HERON Instruments Inc.based in CANADA
The H.OIL oil, water interface meter is used to measure the interface level between two liquids in the same tank, vessel, well or aquifer. The dissimilar density of two liquids means the lower density, non-conductive product (LNAPL) will float on top of the higher density, conductive liquid (water). Denser products will tend to sink ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you