well sounder Equipment

9 Results found
Only show results available in Virginia?
  • Category: Soil & Groundwater ×

  • Subcategory: Water Wells ×

  • Keyword: well sounder ×

Well Sounder

by RST Instruments Ltd.     based in Maple Ridge, BRITISH COLUMBIA (CANADA)

RST Well Sounders are designed to measure the depth of boreholes, standpipes and wells. Depths are quickly measured by simply lowering the stainless steel weight, which is attached to the wire, until it reaches the bottom of the well or borehole. The onset of any slack in the wire will indicate when the bottom has been reached, at which point the ...

Eno Scientific - Model WS131 - Flow Meter Well Sounder Compatible Flow Sensor

by Eno Scientific     based in Hillsborough, NORTH CAROLINA (USA)

The Eno Scientific WS131 Flow Meter is designed to measure water flow for monitoring well drawdown and usage. It uses a modular design consisting of a PVC housing and an electronic sensor module that easily attaches to the housing using a hand tightened ring nut. With the sensor in place, electrical pulses are generated as water moves past the ...

Well Sounder - Model 2010 PRO - Complete Groundwater Monitoring System

by Eno Scientific     based in Hillsborough, NORTH CAROLINA (USA)

The Well Sounder 2010 PRO is a sonic water level meter, designed and manufactured by Eno Scientific, to measure static water level in wells, piezometers or boreholes. This portable handheld unit uses sound waves to measure the distance from the top of the well to the water level. This eliminates the need to lower anything into the well. Unlike ...

Well Watch - Model 600 Series - Line of Sonic Water Level Meters

by Eno Scientific     based in Hillsborough, NORTH CAROLINA (USA)

The Well Watch 600 Series is a line of sonic water level meters designed for semi-permanent installation. These units utilize sound waves and adaptive sensor technology to learn the makeup of a particular well allowing for the most accurate readings. The Well Watch meters were designed to be a solution for the long term monitoring needs of ...

GM - Model PWRA - Power Sounder

by Geomorph Instruments     based in Piraeus, GREECE

Geoelectric Power Sounder PWRA-2000 is a device for data acquisition and interpretation of deep VES (vertical electrical sounding) as well as for 8 channel profiling (resistivity and IP sections). It can be used for measurements up to 1000 – 2000 m depth allowing both high voltage and high current injection of transmitter current according to real ...

LOG_aDSLP - Echo Sounder

by General Acoustics e.K.     based in Kiel, GERMANY

LOG_aDSLP is totally new and different to all other currently available hydroacoustic systems. LOG_aDSLP is based on a revolutionary new concept. It uses different frequencies out of a broad frequency range to stimulate the interaction between sound wave and material. LOG_aDSLP detects this interaction with a very high resolution. LOG_aDSLP uses ...

Model WL500 - Water Level Sounder

by Global Water Instrumentation, Inc. - a Xylem brand     based in Gold River, CALIFORNIA (USA)

Global Water's WL500 Well Level Sounder sets a new precision standard for well water level measurement. The Water Level Sounder meets or exceeds federal specification US GGG-T-106E (USA) or EEC CLASS II (Europe) for a guaranteed accuracy of 0.008%. The Water Level Sounder uses a full depth-rated stainless steel and teflon probe that is 5/8-inch ...

Water Level Measurements: Sounding Devices with Acoustic and Light Signal, Inversion

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

The devices are provided with a probe, which is connected to a measuring tape with centimeter graduation. When the probe touches a conductive liquid, a clear acoustic and light signal is produced. If the cable is then lifted a little, the signal will stop. Determination of this point allows the user to read the depth directly from the measuring ...

Interface Modules

by Mavili Elektronik Ticaret ve Sanayi A.S.     based in Istanbul, TURKEY

Monitor and control modules, offering high performance by the VIP communication protocol, can be configured to operate in cause-effect scenario and fire automation can be performed.Monitor and control modules can cooperate with peripheral systems by making the related identifications in fire scenario. As well as monitoring peripheral systems, the ...

Need help finding the right suppliers?

Let the XPRTs do the work for you