Well Drilling Applications available in Australia
-
Premium
Cathodic Protection and Pipeline Integrity Monitoring Solution for Offshore Platforms
Located miles off the coastline, offshore platforms are huge steel structures equipped with the resources to drill wells and extract oil and natural gas from the ocean floor. Offshore platforms may be floating or fixed, and they contain facilities to store and process oil and gas, as well as pipeline systems that connect the wells to these storage and processing components. Offshore platforms are continuously threatened by corrosive forces. The rate of corrosion in marine environments can be accelerated by ...
By Mobiltex Data Ltd based in Calgary, ALBERTA (CANADA).
-
Ground-Gas Monitoring Technology for Coal Seam & Shale Gas
GasClam enables continuous monitoring of active and non-active coal seam gas (coal bed methane) and shale gas ...
By Salamander Group based in Ulverston, UNITED KINGDOM.
-
Seismic borehole and surface solutions for cavity detection sector
Karst structures: Solution processes are a common phenomenon in limestones and dolomites which can lead to karstification causing in many cases cavities. They can be air-filled or filled with fine-grained material, which decrease the soil stiffness and thus the load capacity. Exploratory drillings, which are generally used for soil investigations, provide only local information about the subsoil conditions and are not suitable to detect small-scaled structures in a geologically heterogeneous environment. ...
By Geotomographie GmbH based in Neuwied, GERMANY.
-
Applications and Air Pollutants Removed in the Petroleum/Petrochemical Industry
Scrubbing of Hydrogen sulfide, mercaptans and other organosulfur compounds from sour gas and other sources. Proprietary regenerative scrubbing chemistries for hydrogen sulfide removal with sulfur production. By-product production systems for producing sodium hydrosulfide (Nash) from hydrogen sulfide. Sulfur dioxide scrubbing. Recover catalyst dust from FCC units. HCL storage tank vent scrubbing. Removal of HCL and particulate from thermal oxidizers burning chlorinated plastics. Marine drilling platforms sulfur ...
By Bionomic Industries Inc based in Mahwah, NEW JERSEY (USA).
-
Drill pipe cleaning
Problem: When scale and hardened mud build up in oil well drill pipe, plugged drill heads are the usual result. This reduces efficiency and increases downtime. Traditional rattle-and-brush systems can leave some build-up behind and require a rinse operation to flush debris and drilling ...
By NLB Corp. based in Wixom, MICHIGAN (USA).
-
GIS Software for Petroleum Industry
For years, petroleum companies have used Esri's GIS to decide where to drill a well, route a pipeline, build a refinery, and reclaim a site. Today's GIS provides oil and gas industry solutions throughout the petroleum life cycle. All major oil companies in the world use Esri's GIS technology to manage their location-based information, from leases, wells, and pipelines to environmental sites, facilities, and retail ...
By Esri based in Redlands, CALIFORNIA (USA).
-
Radiation and chemical detection instrumentation for Mining & drilling
Mining and drilling operations for radioactive ore such as Uranium, Thorium, Radium, and Rare Earth requires detection and monitoring of radionuclides. Drilling for gas or oil using hydrofracking methods also requires radiation monitoring for environmental and worker safety. Fracking rock releases naturally occurring radioactive isotopes such as Radon, Radium-226, Uranium-238, and Thorium-232. Equipment used for prospecting oil, water, or gas requires the use of radiation detectors for geological evaluation. US ...
By US Nuclear Corporation based in Canoga Park, CALIFORNIA (USA).
-
Microbial testing in upstream oil & gas industry
On-the-spot measurement of total microorganisms! Microbial growth can be a significant nuisance in the upstream oil and gas sector. Well drilling, completion and stimulation activities can introduce microbes into a producing formation. Microbes found in the near well bore of producing wells can impede inflow, corrode tubulars and pumps and sour the formation. At the surface, production problems associated with microbial infection include corrosion and fouling of wellheads, pipelines, heater treaters, separators ...
By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).
-
Digital high-quality camera solutions for oil and gas industry
High quality, reliable observation and monitoring of remote and inhospitable environments via our ATEX and IECEx certified digital IP cameras. Within the oil and gas industries there are many hazardous processes, often in very remote locations and inhospitable environments. This is where our explosion-proof ATEX and IECEx-certified cameras come into their own as they facilitate observation and monitoring, removing the need for personnel to be on-site. Our ATEX and IECEx cameras are compliant with international ...
By SeSys Limited based in Petersfield, UNITED KINGDOM.
-
Well Temperature Control Solution for Well Surface Temperature Control
Drill Cool Systems is an integral member of the well design team. We share our extensive experience earned while operating on High Pressure High Temperature (HPHT) wells all over the ...
By Drill Cool Systems, Inc. based in Bakersfield, CALIFORNIA (USA).
-
Offshore Oil Drilling and Production Project
PROJECT OVERVIEW: The re-lining of 12 seawater supply wells to a depth of 45 metres with Boode Select PVC screen and casing. The supply wells support an offshore oil drilling and production platform and were re-lined following the failure of existing stainless steel screen and casing due to sand ingress and corrosion. ...
By Boode Waterwell Systems based in Zevenhuizen, NETHERLANDS.
-
Heat Transfer Solution for Oil and Gas Industry
No matter if it’s during exploration or processing, the safe operation of oil and gas equipment depends on reliable, high-performance heating and cooling equipment. Our heat exchangers are up to the task. The biggest names in the industry depend on API Schmidt-Bretten products to perform in any and all ...
By API Schmidt-Bretten GmbH & Co. KG based in Bretten, GERMANY.
-
Well Temperature Control solution for Geothermal Drilling
Geothermal energy began in the United States in the early 1800’s. By the late 1920's electrical power was produced by John D. Grant at the Geysers. Fifty years later, during the oil crisis of 1979, Kern Steel Fabrication invented the Geo-Cooler to support the geothermal industry’s efforts to perform closed-loop drilling, which reduced the environmental impact of drilling. Well temperature control was needed to dissipate heat from the drilling fluid, otherwise it would accumulate heat and turn to ...
By Drill Cool Systems, Inc. based in Bakersfield, CALIFORNIA (USA).
-
Environmental sensors solutions for well characterization sector
New well assessment gathers information on the produced fluid for the producer to determine the economic production capability of the newly drilled well. Flo·Point provides on line, real time information on water content of the oil stream for logging and evaluation of the well to the production team. For producing wells evaluation of the amounts of water produced enables the producer to identify water zones and take remedial action. Flo·Points range of measurement provides for constant indication of ...
By E.S.I. Environmental Sensors Inc. based in Sidney, BRITISH COLUMBIA (CANADA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you