industrial process control Training and Courses

Industrial Process Control and Instrumentation

To provide an understanding of control systems and associated equipment. The knowledge, skill and techniques necessary to maintain and calibrate this equipment.

By Uniper Engineering Academy based in Nottinghamshire, UNITED KINGDOM. from Industrial Process Control and Instrumentation Training line

Premium

Achieving PAT and QbD goals with Process Analytics Equipment

Since the FDA revolutionary PAT guideline in 2004, the industry has talked non-stop about the potential of PAT (Process Analytical Technology) and more recently, QbD (Quality by Design). PAT is an enabler of the concept of QbD. This webinar will focus on new technologies used to assist the control of pH, dissolved oxygen and conductivity in up- ...

By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Achieving PAT and QbD goals with Process Analytics Equipment Training line

Premium

The Role of Process Analytical Technology (PAT) in Green Chemistry and Green Engineering

Today, the chemical industry faces major challenges including globalization, environmental regulation, and shortening product life cycle. Meeting these challenges requires alternative approaches towards reducing costs and improving the environmental and economical profile of chemical processes. Breakthroughs in process operations and process ...

By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from The Role of Process Analytical Technology (PAT) in Green Chemistry and Green Engineering Training line

Process Emissions and Control

This short course will provide you with the specialist understanding of major air pollutants, the associated regulatory frameworks and detection and monitoring techniques. The course covers principal air pollutants associated with industrial processes such as bioaerosols, odours, dust and particulates, noise and radiations.

By Cranfield University based in Cranfield, UNITED KINGDOM.

Premium

Webinar : High-pressure DSC

Increased pressure influences all physical changes and chemical reactions in which a change in volume occurs. For material testing, process development, and quality control there is often no alternative to DSC measurements under pressure. High-pressure DSC allows you to measure samples under defined atmospheres at up to 10 MPa as a function of ...

By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Webinar : High-pressure DSC Training line

Instrumentation and Controls for Industrial Applications Technical Training Courses

Target Audience: Recently Graduated Engineers, Senior Plant Operators and Maintainers. Course Duration: Three Consecutive Days, Eight Hours a Day. Class size: Minimum five students. Prices: $1,750.00 per student. Discounts for 11 or more students. Course Location: Abbottsfield’s Oregon offices; National and International Video Conferences.

By Abbottsfield Industrial Training, Inc. based in Portland, OREGON (USA). from Instrumentation and Controls for Industrial Applications Technical Training Courses Training line

Integrated Process Management

The purpose of Integrated Process Management is to consistently control production variables to achieve higher quality, less scrap, and greater on-time delivery. Integrated Process Management is described in the book by the same name, written by Roger Slater. Phil has helped companies successfully implement IPM in a variety of ...

By Greenbridge Management Inc. based in Mississauga, ONTARIO (CANADA).

Statistical Quality Control Training

Statistical process control (SPC) involves using statistical techniques to measure and analyze the variation in processes. Most often used for manufacturing processes, the intent of SPC is to monitor process quality and maintain processes to fixed targets. SPC is used to monitor the consistency of processes used to manufacture a product as ...

By The Institute of Industrial Engineers based in Norcross, GEORGIA (US) (USA). from Statistical Quality Control Training Training line

Industrial Coating Application (ICA) eCourse

Today, the coatings industry is a highly technical field that requires skilled personnel to perform quality surface preparation and protective coatings application. The Industrial Coating Application eCourse is a comprehensive training program based on the NACE No. 13/SSPC-ACS-1 standard that sets the criteria for a qualified workforce that can ...

By NACE International based in Houston, TEXAS (USA). from Industrial Coating Application (ICA) eCourse Training line

Water and Wastewater Industry Online Training

Gain a general understanding of the financial, economic, and physical impacts of corrosion on the water and wastewater industry, as well as how corrosion control results in cost savings and lower health risks. The Corrosion in the Water and Wastewater Industry eCourse is geared towards individuals who need the ability to recognize and understand ...

By NACE International based in Houston, TEXAS (USA). from Water and Wastewater Industry Online Training Training line

Control Charts Course (SPC)

Control Charts are a key tool in any Six Sigma initiative, and the cornerstone to a strong total quality management organization. There are numerous run charts and control charts with lots of calculations. This course simplifies the understanding of Statistical Process Control (SPC) and statistical quality control by providing the formulas and ...

By Business Performance Improvement (BPI) based in Portland, OREGON (USA).

Semiconductor Process Chemical Safety Training (Part Two) Online

This online course is intended to provide you with specific information about chemical hazards in semiconductor (and related) operations and provide them with additional knowledge about engineering, administrative, and personal protective equipment controls. This is the second training course in a series of two from Compliance ...

By Compliance Solutions based in Denver, COLORADO (USA). from Semiconductor Process Chemical Safety Training (Part Two) Online Training line

Optimizing Your Process Analyzer Sampling Systems

Process analyzer sampling systems are critical to your facility’s production control and automation, and an optimized system combines these three traits to provide exceptional analysis performance. Having personnel on-site who can evaluate and determine if a problem is being caused by an analyzer or by the sample system can save valuable ...

By Control Analytics, Inc. based in Export, PENNSYLVANIA (USA).

Introduction to the Toxic Substance Control Act (TSCA)

Course Overview: This two (2) hour course provides each student with an in depth analysis of the key provisions comprising the Toxic Substance Control Act (TSCA), including requirements for Pre-Manufacture Notification (PMN), testing, and regulation of chemicals; as well as record keeping and reporting requirements. TSCA is a broad-ranging ...

By EPA Alliance Training Group (Baxter Communications Group) based in The Woodlands, TEXAS (USA). from Introduction to the Toxic Substance Control Act (TSCA) Training line

OSHA 30 Hour Training for General Industry

The 30 Hour training program covers OSHA policies, standards and requirements, including health & safety principles for general industries. The 30 Hour course was designed by OSHA for supervisors, management and any other company personnel with some safety responsibility for analyzing work-site hazards. The course provides participants an in-depth ...

By HAZMAT Plans & Programs, Inc. based in Aurora, COLORADO (USA).

Premium

Webinar - Optimize Separations in Dark Crude Oil

This webinar focuses on how to optimize flow assurance, separations, fouling, and tailings management to reduce exploration and production costs in dark crude oil at standard operating temperatures and pressures, without sampling or sample dilution.

By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Webinar - Optimize Separations in Dark Crude Oil Training line

Hazard Analysis Critical Control Points (HACCP) Training Course

Hazard Analysis Critical Control Points (HACCP) is the main platform for international legislation and good manufacturing practices for all sectors of the food industry. HACCP also forms a key component of many certified compliance standards and is recognized as a main element of international trade in food products. A HACCP system helps you to ...

By Kelmac I Group, Inc based in Chicago, ILLINOIS (USA). from Hazard Analysis Critical Control Points (HACCP) Training Course Training line

Premium

Bioprocess Academy - a knowledge hub

Welcome to this knowledge hub for people from both the academia and the industry within various fields. Here you will find a collection of articles, online courses, short summary of book chapters and online simulation tool both with shorter tips and further in-depth content. The Bioprocess Academy will be regularly updated with valuable ...

By Bioprocess Control Sweden AB based in Lund, SWEDEN.

SPC Certification Exam

Certification by AIAG in SPC confirms an individual's proficiency in statistical process control techniques as defined in the SPC reference manual. The individual is able to apply and communicate them, and as a result, can successfully support the monitoring and improvement of manufacturing processes.

By Automotive Industry Action Group (AIAG) based in Southfield, MICHIGAN (USA). from SPC Certification Exam Training line

DVD Training

ISA Training DVDs are an informative way to brush up on the technology you encounter daily in your job. These fast-paced lessons include live footage shot at manufacturing plants around the world, and include the following series: Automatic Process Control, Boiler Control, Control Valves and Actuators, Electronic Maintenance, Industrial ...

By The International Society of Automation (ISA) based in Research Triangle Park, NORTH CAROLINA (USA).

Subscribe to our eBulletins

Add Supplier Profile