AAMS-Salvarani Spray-Scanner - Video
With the AAMS spray scanner, the liquid distribution under a spray boom can be measured. The liquid distribution under a spray boom reflects the quality of the sprayer and its distribution under field conditions. The distribution is measured with a high precision and independent of the operator. The spray scanner works autonomous under the spray boom until the entire spray boom is measured. • The spray scanner has a measuring surface of 80 x 150 cm. • The measuring plane is horizontal (no slope in the upper surface). • The data are stored in a memory box that can be transferred to a PC. • The data in the memory box can be exchanged through a wireless communication system between scanner and PC. It allows a continuous update of results on the computer and a steering of the device from the PC. • With the software, only the distribution can be reported or a complete inspection report can be edited and printed. • The scanner is usually delivered with two 12V batteries and a charger. • In the kit, 9 rail parts of 3.2 m length are always supplied. • The scanner is activated and navigated through the display unit. A part of the spray boom can be measured again without completion of the rest of the spray boom (e.g. when parameters or parts of the spray boom have been changed), the maximum working width is 72 meter. • On request a water collection container can be delivered. • On request an extension for measuring high speed nozzles (extending the measuring width from 1m50 up to 2m10) can be delivered. This can be added to all existing scanners as well.