Airplaco Equipment Company

PumpMaster | Masonry Grout Pump for Core Filling | Block Fill | Masonry Wall Grouting Video

The AIRPLACO PumpMaster PG-30 is shown on a jobsite in Nashville, TN with Masonry Contractor WASCO, Inc. The pump was brought on the job to demo for WASCO during their building addition project at MBA Wallace Hall. The PG-30 pumped through 125 ft of hose, 25 ft up at 5 yards in 1/2 hour. The mix was a fine grout containing 3/8' aggregate max.

The PumpMaster PG-30 is designed for masonry contactors. It will pump up to 10 yards per hour to allow contractors to empty a typical ready-mix truck in an hour. It features a swing-tube material valve and 4' dual pumping cylinders for smooth pumping of mortars and grouts up to 3/4' minus. The PG-30 pumps fine or coarse grouts. It features self-propelled motion for convenience on the jobsite. Fork slots are included for extra mobility. Even through the PG-30 inculudes a large 4' material outlet, it is a very compact machine that you can position at your command. Transport is a breeze--the PG-30 can be loaded into a typical pickup truck.

Complete audio:
Now, Masonry contractors can efficiently and cost effectively accomplish structural reinforcement and core filling requirements by using a masonry grout pump.
Meet the new Master. The PumpMaster PG-30 is a masonry grout pump designed for grouting masonry block walls and hoisting mortar. Essentially, the PG-30 is a small concrete pump with self-propelled movement.

The PG-30 is self-propelled. The ability to drive the machine into position on the jobsite provides a major convenience for contractors. The AIRPLACO Hydraulic Drive Train is exclusive to the industry--it gives the pump a smooth self-propelled movement. Masonry contractors can further benefit from the portability of the machine. Its compact size makes transport to and from the jobsite a breeze. These pumps can be transported on a trailer or in a typical pickup truck. The PG-30 includes forklift slots and lifting lugs to allow it to be moved or loaded with ease.

The PumpMaster PG-30 includes a 4 inch swing tube material valve. Swing tubes are standard equipment for concrete pumps today. The PG-30, due to its smooth operation and ability to handle larger aggregates, can pump three eights inch pea gravel and grouts with aggregates up to three quarter inch.

The PumpMaster features a 29 horse power gasoline powered engine with fuel injection and key start. The trademark 'LONG LIFE' hard-chrome cylinders are built to last. This ensures that replacement cylinders are kept to a minimum. The compact PG-30 offers a large 4 inch heavy-duty material discharge, making it a truly one-of-a-kind masonry grout pump. The complete machine setup for masonry grout and mortar pumping includes reducers... clamps... material hose... and masonry wall hook nozzle. Contractors often flll block without a wall hook by using the hose end. AIRPLACO two-inch green-stripe grouting hose is lightweight (or heavy-duty) and flexible made to withstand the harshest of jobsites.

At the start of a job, a primer, such as 'slick willie' brand, or a cement slurry is used to lubricate the material hose. The PumpMaster PG-30 will pump materials directly from a ready-mix truck. AIRPLACO supplies material mix designs that contactors can specify with their ready mix provider. The PumpMaster PG-30 pumps 10 yards per hour (or 7.6 cubic meters) allowing you to cycle through a typical ready mix truck once per hour. Using ready-mix ensures consistent material on the job to achieve required compressive strength. Contractors can use existing mixers with a masonry grout pump. Typical mortar mixers on the jobsite can take up to 7 bags or 20 cubic feet, have adjustable legs to manage loading height and feature hydraulic dumping. Mortar mixers offer self-sufficiency by allowing contractors to mix materials without relying on ready-mix truck deliveries.

Material silos offer another means of batching materials. When coupled with a silo system or wet-mix system, masonry grout pumps offer the perfect means of delivering materials from silo mixers to grout the block walls.

PumpMasters are the ideal machines for efficient core filling. Material flow is controlled at the front of the machine with an on/off switch. The pump includes a remote control with cord for convenience. Wireless remotes are also available. The flow control valve controls the rate of movement and variable pumping speed.

The PumpMaster PG-30 puts you in control of each and every grouting project allowing you to reduce labor by controlling your core filling rate. The PG-30 gives you the power to grout walls at 10 yards per hour. And you will solve space and portability concerns on the job with a compact machine that you can move and position at your command. With this pump...YOU are the Master! The PumpMaster is proudly made in the USA.

Customer comments

No comments were found for PumpMaster | Masonry Grout Pump for Core Filling | Block Fill | Masonry Wall Grouting Video. Be the first to comment!