Rotowrap TT - Loading & Unloading System - Waste Bale Wrapper Wrapping Technology by PTF Häusser 015 Video
Rotowrap TT is the practical and reliable machine for wrapping your waste bales. It is an economical solution for recycling plants with a throughput of up to 15 waste bales per hour for bale weights of up to 850 kg. This machine is equipped with a loading and unloading system so that the Rotowrap TT acts as a fully automatic machine directly downstream of the waste baler. This system consists of a traversing crane unit fitted with a bale fork. The waste bale is conveyed from the ramp behind the waste baler to the wrapper using this crane unit. The waste bale is transported from the wrapping table to a bale collecting belt following the wrapping process. The waste bale is unloaded here by the forklift truck. The machine meets the highest of requirements while ensuring the efficient and exact wrapping of square and round bales during stationary operation. In the case of the Rotowrap TT, both the rotations required for the complete wrapping of a bale are realised simultaneously (around both axes). Turning of the waste bale through the oscillating roller pairs on the turntable achieves a uniform, reliable and controlled rotation around the longitudinal bale axis. Rotation of the turntable simultaneously rotates the waste bale around the vertical axis during this procedure. These two rotations are executed in a fixed relationship to each other. Film is evenly wrapped around the waste bale during this using the fixed film prestretcher, ensuring an overlapping of film layers of 55 %. This saves time during the wrapping process and achieves the best possible sealing of the waste bale.