Only show results available in Virginia? Ok

air lift separation Equipment

  • Premium

    Terra Select - Model V 70 - Air Lift Separator

    The V 70 is a air lift separator, designed for the removal of paper, plastics and other light materials from compost, wood and other streams of heavy waste. The V 70 comes in a silent diesel and an electric model. It works through a system of a heavy duty fan, air hose and funnel. The funnel is placed over the moving stream of waste (e.g.: ...

    By Eggersmann GmbH based in Ibbenbüren, GERMANY. from Products - Terra Select Product line

  • Hoover - Model 700 - Air Lift Separator

    The OBM Hoover 700 is a air lift separator, designed for removal of paper, plastics and other light materials from compost, wood and other streams of heavy waste. The OBM Hoover 700 comes in a silent diesel and an electric model. It works through a system of a heavy duty fan, air hose and funnel. The funnel is placed over the moving stream of ...

    By OBM Machines B.V. based in Buitenpost, NETHERLANDS.

  • Mud Mate

    The Mud Mate is a heavy-duty vacuum-cleaning unit driven by an air or electric motor. It is made with a stainless steel vacuum tank that has water traps and pressure relief valves. The two-way vacuum pump serves for suction and discharge of the vacuum tank. It is skid mounted with crash bars and lifting eyes. Swivel casters are installed for ease ...

    By Flo Trend® Systems, Inc. based in Houston, TEXAS (USA). from Separation Product line

  • Air Classifier Separator

    The Air Classifier Separator also known as a Zig Zag Separator may be installed in a recycling operation for both separation of light films or contaminating paper/foil. It is also used for the separation of fine dust from reclaimed material such as plastic flake or other granular materials. It is typically used after Granulation or Dry Cleaning ...

    By Summit Recycling based in Staffordshire, UNITED KINGDOM. from Separation/Sorting Product line

  • Separator

    Our patented separator was originally developed in 1980 and has been further refined ever since. That means that 30 years of R&D has gone into the three current models designed for separating particles such as fat and oils from liquid, for work as a flotation plant, and finally as a sedimentation plant. As you read this our separators are busy ...

    By Stigebrandt Hydroteknik AB based in Kungälv, SWEDEN.

  • JKF - Dust Bucket

    The dust bucket is suitable for all Blower, EC and DustStorm filters with the exception of DS-7. The dust bucket is mobile and ergonomic correctly designed. The handle can be locked in 2 positions. When the handle is locked in the upper position, the tank can easily be moved. When the handle is locked in the lower position, the tank is easily ...

    By J.K.F. Industrie A/S based in Hadsund, DENMARK. from Filters and Separators Product line

  • Gravity Separators

    Triple/S Dynamics Density Separators are equipped with a porous deck, which is inclined and subjected to vibration which causes material in contact with the deck surface to convey up the inclined surface of the deck.  Low-pressure air is forced through the deck to fluidize the dry mixture so that the lighter materials are lifted from the deck ...

    By Triple/S Dynamics, Inc. based in Dallas, TEXAS (USA). from Density Separation Product line

  • Sortech - Zig Zag air separator

    ZigZag air separator separates light material from heavy material. It is ideal for shredded or granulated plastics, rubber, WEEE material, C&D waste and plasterboard. The air flow required for separation is blown through the separation tube from button to top. Light material is lifted up by the air stream, while heavy material falls through the ...

    By SORTECH based in Genzano di Roma, ITALY.

  • Multi-Stage Oil Mist Collector

    Oil Mist Collector which includes drop-out chamber, separator mesh elements, and fiberglass filters.

    By Monroe Environmental Corporation based in Monroe, MICHIGAN (USA). from Air Pollution Control Systems Product line

  • SCT - Grit Handling

    Grit laden water is fed via the flanged inlet of the integral decanting hopper where the solids are allowed to settle out. A special air system improves the separation of the organic matter and aids the settling of the grit . The horizontal spiral moves the grit to the lifting pit, from which an inclined spiral removes and lifts the grit out of ...

    By Fay Environmental Services based in Cootehill, IRELAND.

  • Flammable Liquid Recovery Vac

    Exceptional static lift and high air flow for recovering large amounts of liquids and slurries. Specifically designed for the recovery of jet fuel and other flammable liquids. Standard 55 gallon compressed air operated unit includes lid assembly with locking lid latches, pressure relief valve, liquid shut off, intake hose closure, 25´ x 1 1/2'' ...

    By BASCO, Inc based in University Park, ILLINOIS (USA).

  • GW - Grit Washing

    The unit can perform both grit classifying and grit washing. The mixture water, grit and organic enters by a vortex type inlet imposing to the particles a rotating velocity. While entering the settling tank that velocity must deflect.  Due to the volume of the tank the velocity is reducing: the combination of the velocity reduction and ...

    By Fay Environmental Services based in Cootehill, IRELAND.

  • Combined Pre-Treatment Unit STU/2

    The incoming sewage is pumped or gravity fed to the STU/2 depending on its location. The sewage flows through the screen. Solids are trapped on the screening element and as the screen becomes blocked, the upstream level rises to a pre-determined level at which the screw operates and clears the screening element While the screenings are conveyed ...

    By Fay Environmental Services based in Cootehill, IRELAND.

  • Combined Pre-Treatment Unit STU/C

    The incoming sewage is pumped or gravity fed to the STU/C depending on its location. The sewage flows through the screen. Solids are trapped on the screening element and as the screen becomes blocked, the upstream level rises to a pre-determined level at which the screw operates and clears the screening element. While the screenings are conveyed ...

    By Fay Environmental Services based in Cootehill, IRELAND.

  • Model VAM 40 MK II - Tent Heating

    Mobile warm air heater for tent heating. The warm air heater VAM 40 MK II is a mobile 38-kW unit primarily developed to provide heating in temporary or transportable buildings or tents. The VAM 40 operates according to the indirect fired principle meaning that the supply airstream is heated separately from the combustion chamber. This way, the ...

    By Dantherm A/S based in Skive, DENMARK. from Mobile Heating & Cooling Product line

  • Model MCF - Centrifuge

    In various clarification processes involving water, water-soluble and viscous liquids such as lubricating oils, the solids generated can cause excessive wear on tooling and adversely affect product quality. To provide efficient low cost liquid-solid separation, Filtertech offers the Model MCF, Manual Centrifuge. The Model MCF Centrifuge utilizes ...

    By Filtertech based in Manlius, NEW YORK (USA). from Centrifuges Product line

  • terabloc - Model F-VNW - Nonwoven Composite Geotextile

    Puncture-resistant, filtering needle-punched nonwoven composite geotextile under rockfill shields and waves

    By TERAGEOS - la solution géosynthétique based in VEUREY VOROIZE, FRANCE.

  • Dancutter - Model DC 70 - Reinstatement Cutter

    We are now the exclusive distributor in North America for all Dancutter reinstatement tools. Dancutter A/S was established as a limited company 1 January 2002, Lone Gammelgaard being the principal shareholder. Since 1989 Lone Gammelgaard has been the holder of a “world patent” of a cutter robot that was till the year 1998 manufactured ...

    By Perma-Liner Industries, LLC. based in Clearwater, FLORIDA (USA).

  • Ace - Model 27 - Sliding Suspension Trailer

    Extends to reach maximum Federal Bridge.  27′ Trailer slides out to 35′ thus giving longer bridge and ability to carry larger containers. Reach 80,000 GVW with ease. Have a 22′ container that weighs 40,000+ lbs? This Trailer Will Handle That All Day, Everyday!

    By Ace Brother`s Equipment based in Cleveland, OHIO (USA).

  • Vulcan - Model 25 TPH - Gypsum Drying System

    Vulcan 25 TPH Gypsum Dryer System – new or used Vulcan 25 ton per hour Gypsum Dryer dries mined gypsum, pelletized gypsum or gypsum for use in wallboard. This equipment has been designed to reduce the moisture content in gypsum through a direct fired rotary dryer. Particulate matter emissions (dust) are controlled using a high-efficiency ...

    By Vulcan Systems based in Moberly, MISSOURI (USA). from Drying Systems- Reconditioned Drying Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you