scrap aluminum Articles

  • Aluminum Recycling

    The Customer The Company is one of the largest producers of aluminum. They conduct business worldwide and serve the aerospace, automotive, building, construction, commercial transportation, consumer electronics, oil & gas, packaging and industrial products & services markets. Aluminum is infinitely recyclable and 75% of all aluminum ever produced is still in use today. ...

  • How To Recycle Scrap AC Radiator

    Every scrapper’s dream is to find a “jackpot” of metal that is ripe for the picking. If you have any type of experience under your belt, you’ll know that “jackpots” are not happened upon often...unless, you happen to find an AC radiator. These are the non-ferrous tube systems that are used to compress air and radiator off heat. The bigger the AC unit, ...


    By Allance

  • Aluminum Manufacturing Industry - Pollution Prevention Guideline

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • How to Recycle Radiator Scrap?

    Radiator is widely used in cars, trucks and other automobiles. Radiators were also once an essential part of a home heating system. In today’ s life, AC radiator is more known by commons. Before discussing how to recycle radiator, let’s have a general knowledge of this three kinds of radiators. Car radiators was almost born with the automobile itself. We know that, as the ...

  • How to Set Up Your Scrap Yard?

    Scrap metal business has a huge market because recycled and scrap metal is cheaper than pure metals, therefore a wide scope of businesses can benefit from buying these raw materials at a cheaper price. If you are thinking of starting a scrap metal business, you need to know and consider a lot. First, you need to be able to identify and sort different metals. Buyers will purchase specific metals ...

  • Secondary materials transfer from Japan to China: destination analysis

    China has been the largest importer of secondary materials for recycling from Japan during the past decade. In this study, we analyzed the transfer of major secondary materials (plastic, steel, copper, and aluminum scrap) from Japan to China. We identified specific destinations for secondary materials, and the characteristics of secondary materials transferred to China. The major destination for ...


    By Springer

  • Aluminum trim scrap, ST-75E, Throught USA - Case Study

    Specially designed ST-75E for shredding of automotive aluminum trim scrap at stamping plants. Note the use of air-vey shredder ...


    By Shred-Tech Corp.

  • Aluminum recycling at Centro Rottami, Italy - Case Study

    Aluminum recycling is particularly important for the Italian economy, which has historically been lacking in raw materials – The showcase of Centro Rottami. Aluminum recycling is particularly important for the Italian economy, which has historically been lacking in raw materials. In fact, as much as 90% of the aluminum produced in the country comes from recycling, and is identical to ...


    By TOMRA Sorting GmbH

  • Overview of the Whole Copper Recycling Chain

    Copper is of good characteristics. It is easily stretched, molded, and shaped; is resistant to corrosion; conducts heat and electricity easily. Therefore, copper is widely used in construction, power generation and transmission, electronic products manufacturing, and the production of industrial machinery and transportation vehicles. At the same time, as a non-renewable resource, copper is also ...


    By Allance

  • Identification and control of safety and health hazards in metal scrap recycling

    The audience for this guide is anyone who works in the metal scrap recycling industry—employers, employees, safety professionals, and industrial hygienists—should read this publication. This guide can help you identify and manage the hazards associated with exposure to various metals and processing chemicals and with related processes and equipment used in metal scrap recycling operations. Why is ...

  • New for old – the film cycle case study

    Plastic belongs, among glass, paper and aluminum, to the most common materials when it comes to recycling. Hammerl, headquartered in Gemmrigheim (Germany) proves impressively how profitable and resource-friendly it is to recover PE film. For a year now, the company is capable of producing its own PE granulate from film scrap by using the most modern size reduction equipment. This granulate can ...


    By WEIMA

  • Centro Rottami, Italy - Case Study

    Aluminum recycling is particularly important for the Italian economy, which has historically been lacking in raw materials. In fact, as much as 90% of the aluminum produced in the country comes from recycling, and is identical to the product obtained from the original ore. Thus, in line with current practice elsewhere in the world, it is no coincidence that Italy has installed a great number ...


    By TOMRA Sorting GmbH

  • Direct fired thermal oxidizer - Aluminum manufacturer

    Epcon has extensive experience in designing and building Air Pollution Control Systems for the Aluminum Industry. The Problem The company had a direct fired afterburner and a gas fired rotary kiln. The kiln would de-oil the aluminum scrap and the offgas would go to the afterburner. The design of the system was over 20 years old and very fuel ineffficient.   ...


    By Epcon Industrial Systems, LP

  • MB-LS170 Screening Bucket Designed for Exploitation of Scrap Aluminum

    The use of waste from industrial processes and their exploitation and re-use in the carrying out of new projects is a regular practice in many countries today. According to Italy-based MB Crusher, one recent testimony regarding such exploitation of waste comes from one of MB’s Germany-based ...


    By MB Crusher

  • Foundries Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Applications of Tray Pads in Rolling Mills and the Secondary Aluminum Industry

    Due to the rapid growth in the use of aluminum by automobile manufacturers, there have been an increased supply demands for aluminum rolling mills. The aluminum industry is buoyant as manufacturers take advantage of the materials strength and lightness in preference to steel. A good example is Ford committing to aluminum for the F-150 pick-up truck. Ford Motor made a bold gamble in 2015 with a ...


    By Mid-Mountain Materials Inc.

  • Product Spotlight – The ExtractPack Vertical Baler

    The Perfect Solution for An Industry Niche Bottling facilities, retail centers, and distributors all face the challenge of what to do with out-of-date product.  This becomes particularly difficult when that product is in liquid form and the containers are made of plastic or metal.  The conventional method of manually draining liquid from bottles or cans is very time ...


    By Harmony Enterprises, Inc.

  • Recycle Cans

    Garbage isn't something most Americans want to think about every day. Still, the ways we manage the nearly 230 million tons of it that are generated each year has huge implications for everyone. While America is making gains in the effort to reduce the amount of waste produced each year and to improve the way we deal with garbage, there is still work to do. And every American can help--starting ...


    By Bee Cool LLC

  • ENERPAT Alligator Shear Simple Introduction

    Alligator Shear, also named Scrap Metal Cutting Machine, used for cutting long scrap metals ...


    By Enerpat Group UK Ltd

  • Dumpster Divers Give a Boost to Recycling

    Recycling advocates are always searching for new driving forces to move the field forward on the road to materials recovery. Greater emphasis is now placed on composting programs, commercial office paper recovery, construction and demolition salvage projects, and support of reuse centers. While these strategies have been successful, there is still the sense that — for recycling to be more ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you