aluminium separation News

  • The Masters ‘Sort Out’ BMW

    Master Magnets Ltd custom built and designed a swarf separator for one of the world’s largest car manufacturers. BMW had the problem of obtaining clean aluminium from left over swarf at their engine manufacturing plant at Castle Bromwich in the Midlands BMW. BMW had the problem of obtaining clean aluminium from left over swarf at their engine manufacturing plant at Castle Bromwich in the ...


    By Master Magnets Ltd

  • Stockpiling alu cans risks 2009 targets, says Alupro

    Alupro has called on aluminium can collectors to stop stockpiling the material amid concerns it could affect 2009 recycling targets. As a result of the global economic slowdown, “recycling targets in 2009 are going to be tough to hit anyway,” Alupro executive director Rick Hindley said. Such stockpiling disrupts the generation of Packaging Recovery Notes (PRNs), and material that has not been ...

  • Innovative sorting of Aluminium and Zorba

    REDWAVE XRF new sorting possibillities for the aluminium recycling industry Introduction There are no limits set to the recycling of metals, they can be reused without limitation and to one hundred percent. Of course, metals have to be separated from non-metal impurities and different metals have to be sorted in pure fractions to be able to use them as secondary ...

  • Aluminium recycling

    Aluminium recycling is one of the most interesting topics at the moment, as aluminium is a highly sought-after raw material, just like steel. If it is processed properly, there is no limit to the reuse of aluminium. Recycled aluminium will not lose its quality through recycling as long as material of the highest possible purity is used. Currently, aluminium is shredded by means of shear balers to ...

  • Redwave Metal Days! The best opportunity to stay on top of new developments in the field of metal/aluminium recycling!

    Metal and aluminium recycling is moving ever more into the spotlight as companies around the world seek to incorporate more secondary material into their materials flow sheet and product lines. Metal scrap offers many economic benefits over prime metal. This event features international speeches of different sectors in the metal and aluminium recycling industry and latest innovations. ...

  • EU aluminium beverage can recycling hits 63%

    Aluminium drinks can recycling has increased to 63% across the EU27, data from the European Aluminium Association (EAA) has found. During the past two years, the recycling rate for aluminium cans has risen by 5.4%, going from 57.7% in 2006, to 61.8% in 2007 and reaching 63.1% in 2009. Germany recycles the most cans, with a rate of 96% by using the Green Dot scheme, which means the product ...

  • New possibilities in the metal recycling industry – International experts gathered in Gleisdorf

    The REDWAVE Metal Days, at BT-Wolfgang Binder in Gleisdorf, provided the context for international experts from various sectors of the metal and aluminium recycling industry to exchange information on markets, technologies and practical experience. In addition, the new REDWAVE XRF-M sorting system, for recycling in the metals sector, was presented to the participants. The interest of the ...

  • Radiators Recycling

    Using its experience in the electric cables recycling field, Guidetti Company has created a line for recycling of the radiators coming from cars, household appliances and air/liquid industrial coolers with the capacity ranging from 400 up to 1.200 kg/h. 3 models are available, according to the radiator’s composition that can be made up of: copper/aluminium, copper/aluminium/plastic, ...


    By Guidetti Recycling Systems

  • Eddy current separator sales reach all time high

    Recent increases in the value of aluminium have put the sales of Master Magnets Eddy Current Separators at an all time high. The Mastermag factory has become extremely busy over the last month as the production team have been working tremendously hard to handle the recent surge in ECS output. The amount of Eddy Current Separator sales in the last month accounts for more than 26% of the total ECS ...


    By Master Magnets Ltd

  • TOMRA´s latest automated LIBS sorting technology is making aluminium recycling worthwhile

    Coupled with its market-leading X-TRACT, TOMRA Sorting will launch its LIBS technology, at ALUMINIUM 2016, in Düsseldorf, Germany, between 29 November and 01 December, 2016. Conveniently situated in the exhibition’s Recycling Pavilion (Hall 11), TOMRA Sorting can be found at Stand 54 where its ALUMINIUM 2016 team will be on hand each day ...


    By TOMRA Sorting GmbH

  • New Luton plant for laminate packaging recycling

    Waste firms or producers looking to recycle their laminate packaging waste such as drink cartons, toothpaste tubes and coffee sachets can now test this at a new engineering facility in Luton. Privately funded environmental technology solutions firm Enval has opened the new pilot plant in the town. The company, originally a spin-out from the Chemical Engineering Department at the University of ...

  • Unique recycling firm receives big investment

    Enval, the first packaging recycling company to allow complete recycling of laminate packaging waste, has obtained significant investment from the East of England Co-Investment Fund. Laminate packaging is a material made up from tightly-packed layers of aluminium and plastic that are hard to separate, such as a drink carton. The spinout company of the ...

  • Eriez introduces the New Shred1 Ballistic Metal Sorter to Scrap Processors

    Eriez Magnetics Europe Ltd introduces their new Shred1™ Separator which uses ballistics to efficiently separate iron-rich ferrous from much of the mixed metals and waste material in the post Magnetic Drum flow in scrap processing lines. This powerful and innovative separator delivers three distinct fractions with the first being a high value, low-copper content ferrous product. This ...


    By Eriez Magnetics Europe Ltd

  • REDWAVE XRF - new sorting possibilities for the Metal and Aluminium Recycling Industry

    The sorting system REDWAVE XRF was initially used in the field of glass sorting, more precisely for the separation of heat-resistant and leaded glass from the waste glass cullet. Soon it became apparent that the fields of application go far beyond the glass sector. The use of this innovative technology together with the development of a new machine design set new standards in the metal sorting, ...

  • Eriez new eccentric rotor for RevX-E® eddy current separator

    Eriez, world leading authority in magnetic separation, announce the release of a new rotor design for its RevX-E® eddy current separator, Eriez’ most recent addition to its extensive line of recycling equipment. The new design of the eccentric magnetic rotor brings the greatest recovery of valuable non ferrous metals for application in automobile shredding, glass cullet, plastics, ...


    By Eriez Magnetics Europe Ltd

  • Premier of the new eddy current separator CanMaster - The master for coarse material at STEINERT

    Ecomondo in Rimini/Italy and Pollutec in Lyon/France were the venues where Steinert’s new eddy current separator—the CanMaster—was first presented to the world. The reception it received was great! “At last”, said the visitors, “no more compromises. The STEINERT technology is finally available at a good entry-level price'. The CanMaster gets its name because its target is coarse pieces of ...


    By Steinert GmbH

  • Novelis Commissions Expanded Latchford Recycling Plant

    Novelis, the world leader in aluminium rolling and recycling, announced today the commissioning of its expanded recycling plant in Latchford, Warrington in the UK. With an investment of approximately € 13.6 million (£6 million), the plant’s capacity will increase by over a third and becomes Europe’s largest closed-loop recycling operation for automotive aluminium rolled ...


    By Novelis Inc.

  • Nederman receives order for over SEK 30 million (€3.3’’) from Stena Aluminium

    The order is for new investments in Stena Aluminium’s smelter in Älmhult, Sweden. Nederman will supply the plant with solutions for the filtration of the fumes generated in the smelting of returned aluminium products. “Our operations are important especially for the environment, but there is also a growing ...


    By Nederman

  • TOMRA showcases latest technologies at ALUMINUM USA

    A strong ALUMINUM USA convention in Nashville, TN, on October 25 and 26, 2017, saw a 13% surge in attendance over the previous show. Eric Thurston, sales manager metals – recycling, and Frank van de Winkel, business development manager metals, met with hundreds of attendees, including representatives from the major automakers, to discuss TOMRA Sorting ...


    By TOMRA Sorting GmbH

  • Rössl & Duso launches its new line of shredders for Aluminium scrap

    Rössl & Duso S.p.a. has a long tradition on mechanical machining of large industrial parts in forged, cast or sheet steel, like turbine casings, naval shafts, rings, etc. for the power, oil/chemical, nuclear and naval industries. The works are carried out exclusively with CNC machines. The company was created in 1970 and is part of the medium-size manufacturing industries of the Veneto region ...


    By Rössl & Duso S.R.L.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you