Only show results available in Virginia? Ok

aluminium recycling machine (Aluminium Recycling) equipment

  • Premium

    REDWAVE - Model M - Optical Electronic Scrap Sorting Machines

    The induction system for the reduction of detrimental substances is able to recognise different metals, such as aluminium, copper, iron and stainless steel.

  • Premium

    Eldan - Model C12 / C15 / C22 / C26 - Separation Tables

    The Eldan Separation Table is an essential machine for material separation in recycling of e.g. Cables (aluminium or copper), Electronic and electrical waste (i.e. WEEE), Aluminium scrap, Tyres (upgrading quality by removing foreign objects), Shredder light fraction (SLF/ASR).

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Separation Tables Product line

  • Premium

    Redoma - Model SM Series - Screening Machine - Up to 1300 kg/h

    The screening machine is used for recovery of small copper and aluminium particles - so called fines - from the insulation of granulated and separated cable. It is always installed as an additional unit, including transport equipment, after a REDOMA separator.

    By Redoma Recycling AB based in Malmö, SWEDEN.

  • Whirlston - Model QJ-16 - Radiator Recycling Machine

    Radiator Recycling Machine IntroductionRadiator recycling machine is designed to process scrap aluminium copper radiator normally used in air conditioning units. Cut the clean radiator neatly into 30-40cm wide, and then put into the material inlet, within seconds copper pipes and aluminum fin will be discharged separately. Copper pipe will keep ...

    By Whirlston Recycling Machinery based in zhengzhou, CHINA.

  • QIDA - Model QD-600C - Copper Wire Recycling Machine

    The machine has unique structure, big processing capacity and lower power consumption. With high separation rate, controlled by PLC system, the separation is conducted by each component coordinately. This equipment has not only improved the purity of metal (copper or aluminium), but also reduced the pollution to environment. Features: 1. Suitable ...

  • Premium

    Master Magnets - Eddy Current Separators (ECS) For Metal Sorting

    The Eddy Current Separator (ECS) is an advanced metal sorting and metal fractions separator unit that is capable of separating non-ferrous metals such as aluminium and copper from dry recyclables. Non-ferrous separators are very common in the fast growing market of beverage can sorting, where they can provide an accurate separation of aluminium ...

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • ComTec - Recycling System

    The ComTec incorporates a large washing chamber that allows fast discharge of material into the receiving hopper. It is equipped with a patented design discharge conveyor that is available in different lenghts to offer material storage to suit your requirements. The machine is fitted with an aluminium cover for easy inspection. An optional extra ...

    By BIBKO Umwelt- und Reinigungstechnik GmbH based in Beilstein, GERMANY. from Recycling System Product line

  • Torneria - Model SB 50 - Cable Stripping Machine

    Cable stripping machine developed for the recycling of electric copper and aluminium cables through quick separation of the outer cable coating.

    By Torneria Bergamini SNC based in Carpenedolo, ITALY. from Cable Stripping Machine Product line

  • Aluminum Melting Furnace Dross Recycling Machine

    Aluminum melting furnace dross recycling machine is a machine adopts foreign advanced technology, no need for any fuel, fast recovery, which can made full use of the aluminum ash and scraps with high aluminum contents and replace the old way for recycling by labor. This machine can separate the aluminum and ash by one time, and has been very high ...

  • Blubox - Lamp Recycling Plant

    The BLUBOX enables to process all kind of lamps in one machine. The recycling of fluorescent tubes is done in a batch process. Means that the lamps are filled in a mixer, where these are broken down and crushed to smaller particles. At the same time, escaping mercurial lamp powder is captured by the exhaust gas system. All compact lamps are ...

    By Blubox Trading AG based in Birrwil, SWITZERLAND.

  • Electric Cable Recycling

    Electric cable recycling without having to strip the cable. At a market price of between AUS $ 5000 - 8000 / T imagine recovering from 100 - 750 kg's / hr. ( subject to machine size ). Guidetti SRL, this Italian company is offer leading edge technology to recycle Electric Copper and Aluminium cored cable. They have developed the SINCRO unit. The ...

    By IT`s GREEN based in Ascot Vale, AUSTRALIA.

  • Premium

    Eldan - Model M16-2 - ACSR Cable Shear

    If processing ACSR Cable or similar type of cable, the ACSR Shear (M16-2) provides a safe and efficient means of reducing long cable lengths in seconds.. It is simple to load, to operate and to maintain.  The ACSR Shear M16-2 offers a very useful and economic way of preparing solid cables for granulation in a granulation system.

    By Eldan Recycling A/S based in Faaborg, DENMARK. from ACSR Cable Shear Product line

  • Henschel - Model PDC range - Double-Acting Balers

    DANIELI HENSCHEL range are especially recommended for continuous compaction of small-sized products, such as metal offcuts (copper, aluminium, zinc, steel, etc.).For your industrial applications or at recycled waste sorting plants, DANIELI HENSCHEL offers a range of nine double-acting press models, to produce up to 5 t/h of aluminium or 10 t/h of ...

    By Danieli Centro Recycling based in CHAMBERY, FRANCE. from Double-Acting Balers Product line

  • Magnapower - Can Sorters

    The majority of cans collected for recycling in both Kerbside and Can-Bank collections are steel. It is therefore necessary to use a magnetic separator capable of efficiently separating the high proportion of steel cans without sacrificing any high value aluminium cans

    By Magnapower Equipment Ltd based in Bromsgrove, UNITED KINGDOM.

  • Wrights - Model 400 - Alligator Shears

    The Wrights 400 alligator shear is an ideal machine for cropping aluminium, copper, steal tubing, shock absorbers, lead, cable, PVC window frames, and most other hard metals/materials that need shearing into smaller lengths. The foot operation gives total control over the jaws, the blade can be raised, lowered, stopped, and advanced from any ...

    By Wrights Recycling Machinery Ltd based in Leeds, UNITED KINGDOM. from Alligator Shears Product line

  • Wrights - Model 300 - Alligator Shears

    The Wrights 300 alligator shear is an ideal machine for cropping aluminium, copper, steal tubing, shock absorbers, lead, cable and most other hard metals that need shearing into smaller lengths. The foot operation gives total control over the jaws, the blade can be raised, lowered, stopped, and advanced from any position, allowing the operator to ...

    By Wrights Recycling Machinery Ltd based in Leeds, UNITED KINGDOM. from Alligator Shears Product line

  • METALL-I-CAN - Multi-Purpose Metal and Oil Filter Baler

    Metallican is the latest in the range of JMC metal balers and one of the fastest. It produces up to 20 bales of metal per hour and is able to act as an oil filter baler, baling over 1 tonne an hour of aluminium cans. The Metallican baler is a general purpose machine with an automatic hopper feed so it is ideal for all non ferrous grades, ...

    By McIntyre – A JMC Recycling Systems Ltd based in Dunkirk, UNITED KINGDOM. from Multi-Purpose Metal and Oil Filter Baler Product line

  • Model Type SZcut - Cutter Pumps

    Milling, drilling, turning - is aluminium your specialised area? If so, you can now dispense with expensive and complicated chip crushers and lifting equipment! SZCUT is a centralized module for modern, advanced delivery technology utilised in aluminium chip processing, specially developed for both plant manufacturers and users. The SZCUT reduces ...

    By Schmalenberger GmbH Co. KG based in Tübingen, GERMANY. from Cutter Pumps Product line

  • Wrights - Model 600 - Alligator Shear

    The Wrights 600 alligator shear is  robust and durable enough for the most difficult of working environments it’s the ideal machine for cropping aluminium, copper, steal tubing, shock absorbers, lead, cable, PVC window frames, and most other hard metals/materials that need shearing into smaller lengths. The foot operation ...

    By Wrights Recycling Machinery Ltd based in Leeds, UNITED KINGDOM. from Alligator Shear Product line

  • WRIGHTS - Model 600-HD - Alligator Shear

    WRIGHTS 600-HD ALLIGATOR SHEARThe Wrights 600-HD (heavy duty) alligator shear is one of the most robust and durable shears on the market today, tough enough for the most difficult of working environments. It’s the perfect machine for cropping aluminium, copper, steal tubing, shock absorbers, lead, cable, PVC window frames, and most ...

    By Wrights Recycling Machinery Ltd based in Leeds, UNITED KINGDOM. from Alligator Shear Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you