Only show results available in Virginia? Ok

Aluminium Recycling System (Aluminium Recycling) equipment

  • CORE - Model RKZ - Aluminium Compounds Recycling System

    The combination of CORE RKZ and CORE DHM enables processing aluminum-plastic laminates to high-purity granules that permit direct recycling, bypassing a remelting process. Through treatment with a CORE system, aluminum profiles, lithographic plates, aluminum dibond etc. contribute to an above-average value creation during processing, be it as ...

    By Urban Mining Solutions GmbH based in Remscheid, GERMANY. from Core- Commodity Recovery System Product line

  • Engine Cracker

    The JMC Engine Cracker has been designed to crack engines so that their different component parts can be separated for recycling. This is a compact, tough and powerful machine able to demolish engines at 3 – 5 tonnes per hour. The JMC Engine Cracker withstands the high forces needed to crush engines and separate valuable components. It has a ...

    By McIntyre – A JMC Recycling Systems Ltd based in Dunkirk, UNITED KINGDOM. from Aluminium Recovery Product line

  • Model Type RL (N) - Complete Treatment Plans for Scrap

    Most of the recycling companies use belt conveyor for the transport of the material. It is disadvantageous that the belt conveyors are not closed as our tube or hutch conveyors. Customers have to be aware that this leads to a higher contamination of the facilities. Apart form that it is not possible to realize vertical transportation. If you need ...

    By Wildfellner GmbH Optimale Fördertechnik based in Buchkirchen, AUSTRIA. from Recycling Product line

  • Premium

    Eldan - Model WST - Water Separation System

    The Water Separation System is a cost effective solution to recover metal dust and fine wires from the plastic fraction after the metal separation. By using a well-balanced combination of water, table inclination and oscillating movements you will get an almost clean plastic fraction with metal losses as low as 0.2%. The metal fraction will have a ...

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Material Separation Product line

  • Premium

    REDWAVE - Model M - Optical Electronic Scrap Sorting Machines

    The induction system for the reduction of detrimental substances is able to recognise different metals, such as aluminium, copper, iron and stainless steel.

  • ComTec - Recycling System

    The ComTec incorporates a large washing chamber that allows fast discharge of material into the receiving hopper. It is equipped with a patented design discharge conveyor that is available in different lenghts to offer material storage to suit your requirements. The machine is fitted with an aluminium cover for easy inspection. An optional extra ...

    By BIBKO Umwelt- und Reinigungstechnik GmbH based in Beilstein, GERMANY. from Mix Industry Product line

  • Premium

    Master Magnets - Eddy Current Separators (ECS) For Metal Sorting

    The Eddy Current Separator (ECS) is an advanced metal sorting and metal fractions separator unit that is capable of separating non-ferrous metals such as aluminium and copper from dry recyclables. Non-ferrous separators are very common in the fast growing market of beverage can sorting, where they can provide an accurate separation of aluminium ...

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Aluminium Scraps and Cuttings De-Coating System

    Donau Carbon Technologies Srl is able to provide aluminium scraps and cuttings (chips) thermal de-coating and cleaning to integrate and carry out an efficient aluminium smelting process down-stream in the Foundry. On this specific regard, Donau Carbon Technologies Srl has implemented on turn-key basis complete systems, including commissioning and ...

    By DCT - Donau Carbon Technologies based in Guanzate (CO), ITALY.

  • Sydney - Recycling Bin

    Frontal Door with Innovative & Attractive Design. Developed to Build Premium Recycling Stations. EES (Ergonomic Emptying System): Safe & Efficient Emptying. With Inner-Rings Bag Holder & Elastic Rubber. SLIM-FIT: Plastic Bags that Saves Money, Much More Efficient. Possibility to Build Recycling Stations with Several Bins. ...

    By Cervic Environment based in Ibi (Alicante), SPAIN. from Recycling Bins Urban Spaces Product line

  • Athens - Recycling Bin

    Modularity, Price & Minimalist Design. Developed to Build Basic Recycling Stations. EES (Ergonomic Emptying System): Safe & Efficient Emptying. With Inner-Rings Bag Holder & Elastic Rubber. SLIM-FIT: Plastic Bags that Saves Money, Much More Efficient. Possibility to Add Rain Hood. Identification of Waste by Printed Aluminium Plate. ...

    By Cervic Environment based in Ibi (Alicante), SPAIN. from Recycling Bins Urban Spaces Product line

  • Aluminum Scraps Recycling Plant

    Low speed and high cutting capacity shredder to shread Aluminium profiles up to 7 mt of lenght and Aluminum sheets, with separation of Plastics, Papers and Ferrous metals.

    By Gianni Mori Engineering S.r.l. (GME) based in Monza (MB), ITALY.

  • Blubox - Lamp Recycling Plant

    The BLUBOX enables to process all kind of lamps in one machine. The recycling of fluorescent tubes is done in a batch process. Means that the lamps are filled in a mixer, where these are broken down and crushed to smaller particles. At the same time, escaping mercurial lamp powder is captured by the exhaust gas system. All compact lamps are ...

    By Blubox Trading AG based in Birrwil, SWITZERLAND.

  • QIDA - Model QD-600C - Copper Wire Recycling Machine

    The machine has unique structure, big processing capacity and lower power consumption. With high separation rate, controlled by PLC system, the separation is conducted by each component coordinately. This equipment has not only improved the purity of metal (copper or aluminium), but also reduced the pollution to environment. Features: 1. Suitable ...

  • Kerby - Kerbside Recycling Vehicle

    Kerby is our unique solution for the future of Kerbside Recycling Equipment.Kerby’s brilliant design allows Cans to be Sorted and Baled into biscuits of Aluminium and Steel during your collection round! Plastic Bottles are pierced, flattened and transferred to a separate transportation chamber. Receptacles are provided t

    By Advanced Recycling Systems Ltd (ARS) based in Pool, Redruth, UNITED KINGDOM. from Other Products Product line

  • Kavurlar - Model HP Series - Semi Mobile Metal Scrap Baler

    Designed for all type of industrial ferrous scrap, end-of-life vehicle and aluminium can recycling processes. This model is different from its competitors with its pressing forces and production capacity.

    By Kavurlar based in Izmir, TURKEY. from Metal Baling Presses Product line

  • Panizzolo - Model Flex 400 - Hammer Mills

    Panizzolo Recycling Systems Flex 400 hammermill is suitable for grinding and refining small-size metal materials, valueing the final product. It works with: aluminium profile, cans from MSW, small electronic components from WEEE and more.

    By Panizzolo Srl based in Piove di Sacco PD, ITALY. from Hammer Mills Product line

  • Henschel - Model PDC range - Double-Acting Balers

    DANIELI HENSCHEL range are especially recommended for continuous compaction of small-sized products, such as metal offcuts (copper, aluminium, zinc, steel, etc.).For your industrial applications or at recycled waste sorting plants, DANIELI HENSCHEL offers a range of nine double-acting press models, to produce up to 5 t/h of aluminium or 10 t/h of ...

    By Danieli Centro Recycling based in CHAMBERY, FRANCE. from Henschel Balers Product line

  • Magnapower - Can Sorters

    The majority of cans collected for recycling in both Kerbside and Can-Bank collections are steel. It is therefore necessary to use a magnetic separator capable of efficiently separating the high proportion of steel cans without sacrificing any high value aluminium cans

    By Magnapower Equipment Ltd based in Bromsgrove, UNITED KINGDOM.

  • Aluminum Die-cast

    General task requirements for systems treating separating agents from the aluminium die-cast: Minimization of disposal costs, High quality distillate with which the separating agents can be used again or discharged.

    By MKR Metzger GmbH based in Monheim, GERMANY. from Branches - Solutions Product line

  • Intesa Machinery - Reels Splitter

    Our reels cutters or reels splitters are designed to cut waste paper rolls and reels by separating the cardboard core from the residue paper. The paper can thus be recovered and processed by press, pulper or shredded. Designed also for cutting aluminium reels, plastic, wrapped bales, polyethylene and other materials. Our machines are ideal for ...

    By Intesa Machinery S.A.S based in Lonato del Garda, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you