aluminium separation (Aluminium Recycling) equipment in Europe

  • Premium

    Eldan - Model C12 / C15 / C22 / C26 - Separation Tables

    The Eldan Separation Table is an essential machine for material separation in recycling of e.g. Cables (aluminium or copper), Electronic and electrical waste (i.e. WEEE), Aluminium scrap, Tyres (upgrading quality by removing foreign objects), Shredder light fraction (SLF/ASR).

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Material Separation Product line

  • Premium

    Redoma - Model SM Series - Screening Machine - Up to 1300 kg/h

    The screening machine is used for recovery of small copper and aluminium particles - so called fines - from the insulation of granulated and separated cable. It is always installed as an additional unit, including transport equipment, after a REDOMA separator.

    By Redoma Recycling AB based in Malmö, SWEDEN. from Single Machines Product line

  • Premium

    Erdwich - Hammer Mills

    ERDWICH hammer mills are the answer to the challenge of selectively shredding hard and brittle materials. Then again, ERDWICH hammer mills also take the pelletisation of rubbery materials - as preparation for downstream separation systems - in their stride. A tough customer? Just so. ERDWICH hammer mills are especially suited to metal, electrical ...

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY. from Shredding Machines Product line

  • Premium

    McIntyre - Model 320 - Alligator Shear

    The 320 Shear has a 12.1/2'' Blade. Recognized as the industry standard for all shears of its class, the 320 is powerful enough to deal with a wide range of operation including the cleaning of automotive aluminium scrap, whole gear-boxes, cylinder heads and blocks, over-sized gate valves and handling all ...

    By Vortex De-pollution (USA) LLC Office in Nottingham, UNITED KINGDOM. from Shears Product line

  • Magnapower - Eddy Current Can Sorter

    Design and built by Magnapower Equipment for the removal of Glass, Paper, Rag etc from Aluminium cans so that the clean aluminium can be recyled. This machine is a cost effective Eddy Current Separator so that the non-metallics can be sorted from the aluminium cans. The cleaned aluminium can be baled for ease of storage and transportation.

    By Magnapower Equipment Ltd based in Bromsgrove, UNITED KINGDOM.

  • Swarf Separators

    Application: Used to separate turnings, millings and swarf, and mixtures of ferrous and non-ferrous metals such as aluminium, brass etc.Process: The turnings and swarf are transported over a magnetic bed on a feed belt. The iron is magnetised and remains on the belt until ejected into a collection hopper. Non-ferrous fragments fall down directly ...

    By Älmhults El-Mek AB based in Älmhult, SWEDEN.

  • Metal Separation

    Vazzoler s.r.l. designs and manufactures Eddy current separators for the recycling sector, which separate the electro-conductive materials (aluminium, copper, bronze, brass, etc.) from the processing materials (non ferrous metal scraps, wooden scraps, glass scraps, plastic scraps and from the urban wastes, etc.).

    By Vazzoler s.r.l. based in Cigole (Brescia), ITALY.

  • Model AP4040 - Metal Can Baler

    PAM Metal Box press bale  is made to easily press and bale the . Aluminium cans, steel cans, sawdust aluminium and  aluminium foil.  Aluminium, steel beverage cans, separated by a magnetic separator to obtain small portable packed in bales. A good performance can be achieved by Supplying of high compression force in the ...

    By PLAN MAKİNA LTD. ŞTİ. based in Torbalı, TURKEY. from Balling Presses Product line

  • Mastermag - Metal Sorting Eddy Current Separators (ECS)

    The Eddy Current Separator (ECS) is an advanced metal sorting and metal fractions separator unit that is capable of separating non-ferrous metals such as aluminium and copper from dry recyclables. Non-ferrous separators are very common in the fast growing market of beverage can sorting, where they can provide an accurate separation of aluminium ...

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Orchid - Traditional Separation Equipment

    The fragmented wastes are subject to a series of processes that removes ferrous metals and alloys like aluminium cans and large plastic bottles.

    By Orchid Environmental Limited based in Adlington, UNITED KINGDOM. from Technology - Process Technology Product line

  • Rhodius - Separator Cartridges

    Knitted wire mesh links form the filter media in our versatile filter cartridges. Besides other applications, these are used for fat deposition in catering establishments or as a filter in industrial production. A kms wire mesh filter usually consists of several superimposed filter mats, a metal frame and a mesh on the front and back sides. We ...

    By Rhodius GmbH based in Weissenburg (Bay.), GERMANY. from Separation Product line

  • STEINERT - Model NES - Non-Ferrous Metal Separator

    The mechanical recovery of non-ferrous metals is the economic basis of all recycling – and theSTEINERT NES Eddy Current Separator with Eccentric Pole System fulfills the associated requirements perfectly! High yield and long life are the qualities that make for assured, long-term operating result. The CanMaster is ...

    By Steinert GmbH based in Köln, GERMANY. from Suspension Magnets Product line

  • Eddy - Eddy Current Separators

    Applications: Used to separate non-magnetic metals such as aluminium, copper, zink and brass. Process: Induction is created in a rotating magnetic field to induce eddy currents in the metals. Non-conductive materials follow the rotation of the drum, while non-magnetic metals are separated off in the opposite direction.

    By Älmhults El-Mek AB based in Älmhult, SWEDEN.

  • Mastermag - Beverage Can Sorter

    The Master Magnets Can Sorter is a low-cost Eddy Current Separator that is designed specifically for beverage can separation. The extremely compact machine, which has been designed as a simple ‘drop in’ unit, enables a customer to easily adapt a can sorter straight into their process. With the ever increasing price of aluminium as well ...

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Model ESSE - Scrap Separators

    Our range of scrap separators comprises our revolutionary ESSE separation units plus electrostatic EESE and magnetic separators for all capacity needs. Our basic versions of ESSE separator consist of multi-zone vibrating table containing ionization and blow stages. The complete version ESSE XL includes additionally a drum screen and feeding ...

    By Ecomation Oy based in Salo, FINLAND.

  • Recco - Metal Separation Plant

    In our facility in Emmeloord, we have engineered a unique dry metal separation installation with a capacity of 600 tons per week. For our relations, we recycle the non ferrous mixed streams into single streams of heavy metals and aluminium with extremely high purity rates. Our unique sorting and recycling method utilizes various separation ...

    By Recco Non Ferro Metals B.V. based in Emmeloord, NETHERLANDS.

  • Wire-Drawing-Machine DZ - 1

    The wire-drawing-machine has been developed to separate the core of an open-wire line out of A1 aluminium. The handling of the machine is simple and not complicated. The rolls of the entry can be adjusted by a hand wheel to different diameters of the steel core (3- 20 mm). In the initial phase you have to lay bare 100 mm of the open wire line by ...

    By Gertrud Diebels based in Kalkar/Kehrum, GERMANY.

  • Densimetric Separation Table

    GOSAG, S.A. is the leading company in developing technology for separating two dry materials with a different density. This technology is used successfully in many sectors such as the chemistry, wood, recycling (compost, rubble from demolition work, aluminium, etc) or the food and drink industries. GOSAG densimetric tables achieve outputs that ...

    By Allgaier Mogensen, S.A.U based in Madrid, SPAIN.

  • Model Type SZcut - Cutter Pumps

    Milling, drilling, turning - is aluminium your specialised area? If so, you can now dispense with expensive and complicated chip crushers and lifting equipment! SZCUT is a centralized module for modern, advanced delivery technology utilised in aluminium chip processing, specially developed for both plant manufacturers and users. The SZCUT reduces ...

    By Schmalenberger GmbH Co. KG based in Tübingen, GERMANY. from Cutter Pumps Product line

  • Aluminum Die-cast

    General task requirements for systems treating separating agents from the aluminium die-cast: Minimization of disposal costs, High quality distillate with which the separating agents can be used again or discharged.

    By MKR Metzger GmbH based in Monheim, GERMANY. from Branches - Solutions Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you