aluminum recovery (Aluminum Recycling - Waste and Recycling) ...

Showcase

GME - Plants for the Melting Process of Aluminium Scraps Recycling

Static & tilting furnaces, melting and holding types, for Aluminum scraps recovery with or without side well to install vortex system, with regenerative ...

By Gianni Mori Engineering S.r.l. (GME) based in Monza, ITALY. from Aluminum Plant - Aluminum Scraps Recycling Product line

Showcase

Redoma - Model PC 12C & PC 15C - Aluminium and Copper Fines Sorting Classifier Up to 1300 kg/h

The REDOMA classifiers are used for recovery of small copper and aluminum particles - so-called fines - from the insulation of granulated and separated cable. The classifier is always installed as an additional unit after the ...

By Redoma Recycling AB based in Malmö, SWEDEN. from Fine Copper Recovery Product line

Premium

PowerCore - Model 9400 - Systems

The PowerCoreTM 9400 allows you to limit the number of employees needed on site. This asphalt & concrete coring system provides a convenient, cost-effective method for retrieving a sample of concrete or asphalt for materials tests, or to collect soil samples from below the pavement. Rather than having to remove large sections of the concrete or asphalt, simply core a small-diameter hole. Then ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from PowerCore Systems Product line

Premium

Redoma - Model SM Series - Screening Machine for Cable Recycling Plants - Up to 1300 kg/h

The screening machine is used for recovery of small copper and aluminium particles - so called fines - from the insulation of granulated and separated cable. It is always installed as an additional unit, including transport equipment, after a REDOMA ...

By Redoma Recycling AB based in Malmö, SWEDEN. from Single Machines Product line

Premium

AMS PowerCore - Model 9410 - Hydraulic Hammer Machine

The PowerCoreTM 9410 allows you to limit the number of employees needed on site. Each model is set up with our standard direct push capability by using a 200 ft-lb. hydraulic hammer along with a 2400 ft-lb. hydraulic core motor that can core through concrete and asphalt to allow access for the collection of intact continuous soil cores. The PowerCoreTM 9410 model has all the same features and ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from PowerCore Systems Product line

Premium

Lamor - Model VX 100-64Q - Oil Rotary Lobe Transfer Pumps

The Rotary Lobe Transfer Pump VX 100-64Q is a light-weight transportable positive displacement pump with multipurpose usages for various oil recovery applications e.g. several types of skimmers. It can also be used as an off-loading pump. The transfer pump has a capacity of 20 m3/h (77 gpm) and it can handle ...

By Lamor Corporation Ab based in Porvoo, FINLAND. from Oil Spill Response Products - Pumps Product line

Premium

Regulator Cetrisa - Model R-SLB - Cans & Briks Sorting System

The Cans & Briks1 SORTER (R-SLB) is classifying equipment that processes the flow of material made up of cans and briks1 that are previously separated from the general flow of the Municipal Solid Waste by means of an Eddy Current Separator. The cans undergo the most influence and are thrown ahead, where they are distinctly separated from the ...

By Regulator-Cetrisa based in Gava, SPAIN. from Non-Ferrous Metal Separators Product line

MG - Model 220VZT - Cable Granulator

The MG220VZT is the next level up in the MG Granulator range. It is truly a complete technological solution for copper and aluminum recovery from electric cables and other materials such as copper aluminum radiators. The 99.9% recovery is achieved using the patented technology of the vibrating air separation ...

By Vortex De-pollution (USA) LLC based in Denver, COLORADO (USA). from PRODUCT by MG Product line

Dens-A-Can - Can Buying Systems

You can automate your aluminum can recovery operation by separating and weighing the cans with out additional handling! No need to manually separate or weigh the cans. The Conveyor/separator removes steel from the aluminum cans which are then dropped into either a 1 or 2.75 cu. yd. bin where the cans are then ...

By Dens-A-Can, International based in Greensburg, PENNSYLVANIA (USA).

MG - Model 380VZT - Cable Granulator

The MG380VZT is the mid level of the VZT MG Granulator range. It is a totaly complete solution for copper and aluminum recovery from electric cables and other materials such as copper aluminum radiators, circuit boards and waste electrical and electronic equipment. The patented technology of the vibrating ...

By Vortex De-pollution (USA) LLC based in Denver, COLORADO (USA). from PRODUCT by MG Product line

RUNSUN - Double Chamber Aluminum Scrap Furnace

and formed a vortex. Then the aluminum scrap shall soon melt but not directly touch the fire. This can realize up to98% aluminum recovery. Characteristic: 1. It adopts regenerative burners to ultimately recycle the heat in exhaust gas to raise the temperature in the furnace, which can significantly improve the ...

By Runsun Metallurgical Equipment Co., Ltd based in Quzhou, CHINA.

Eddy Current Separator

Our eddy current separator is designed to increase aluminum recovery in MRF’s. The separator yields the best separation of nonferrous metal from non-metallic contamination. As aluminum cans or other non-ferrous metals pass over the drum, the alternating magnetic field creates eddy currents that ...

By Krause Manufacturing Inc (KMI) based in San Diego, CALIFORNIA (USA). from Recycling Sorting Equipment Product line

Ejet - Eddy Current Separator for Aluminum Cans Recycling Machine

Aluminum separators automatically pick up aluminum and steel cans from all waste collected from the recycling stations. Recovery aluminum cans from plastic bottles. High efficiency of recovery of aluminum from city ...

By Fushun Ejet Magnetic Equipment Co.,Ltd. based in Fushun City, CHINA. from Eddy Current Separator Product line

NLB - Model SRT-6LT Vertajet - Handheld High-pressure Surface Preparation Tool

® seal. The compact design weighs only 20 pounds (9.1 kg) and includes a counterbalancing system that minimizes operator fatigue. With features like a lightweight aluminum body, available vacuum recovery, 6″ (15.3 cm) Barjet™ nozzle assembly and a 3″ (7.6 cm) vacuum attachment, the ...

By NLB Corp. based in Wixom, MICHIGAN (USA). from Accessories Product line

Tardis - Dross Press

ALTEK was the inventor of the dross press in the early 1990s and at that time had a relationship with a UK company called J M McIntyre, who distributed the ALTEK products. Following this the TARDIS press was initiated and the two systems from the same birthplace became available in the ...

By ALTEK Europe Ltd based in Chesterfield, UNITED KINGDOM. from Products Product line

Altek - Salt Slag Press

ALTEK have developed a specialised salt slag press to extract as much aluminium out of slag as possible. Salt slag differs from aluminium dross due to it having a lower aluminium content and a higher temperature when taken out of the ...

By ALTEK Europe Ltd based in Chesterfield, UNITED KINGDOM. from Products Product line

Altek - Press Heads

All ALTEK TARDIS Gen II Dross Press and Salt Slag models are fitted with a specially designed, cast steel press head, suited to the mould of the dross pan which has been ...

By ALTEK Europe Ltd based in Chesterfield, UNITED KINGDOM. from Steel Castings Product line

MiniVac System

The MiniVac system is a lightweight, aluminium, hand portable vacuum recovery system for the collection of spilt oils and floating contaminates. The MiniVac employs safe diesel driven units with a unique ability to split into 2 parts for ease of handling. The modular system is available in three standard ...

By Vikoma International Limited based in East Cowes, UNITED KINGDOM. from Recovery Systems - Vacuum Product line

Side Well Melters

Gillespie + Powers, Inc. remains one of the leading suppliers of large production Side Well Melting Furnaces dating back to the early commercialization of this method of melting scrap aluminum. As the techniques for metal recovery became more refined, it was obvious that substantial reduction in metal losses ...

By Gillespie + Powers, Inc. based in St. Louis, MISSOURI (USA).

Eco-Tec AnoPur - Purifies Anodizing Baths to Improve Aluminum Quality

AnoPur is a version of Eco-Tec’s Acid Purification System specifically adapted for purification of sulfuric acid used in aluminum anodizing. Hundreds of AnoPur units are in operation in anodizing facilities around the world. AnoPur is used to continuously remove dissolved aluminum from sulfuric acid ...

By Eco-Tec Inc. based in Pickering, ONTARIO (CANADA). from Chemical Recovery/Purification - Aluminium Finishing Product line

Subscribe to our eBulletins