Waste & Recycling Applications available in Belgium
-
Premium
Piping & ducting solutions for the water/waste water industry
Proco Products, Inc. has been supplying water and wastewater treatment plants with cost-effective, durable rubber check valves for decades. Our experience in these industries over the years has allowed us to develop sturdy, high-quality expansion joints and rubber duckbill check valves to assist in the control of back pressures while resisting corrosion and breakage from harsh conditions. Proco operates worldwide, and maintains one of the largest product inventories in North America. For more information on ...
By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).
-
Premium
XRF Spectrometers solutions for scrap sorting industry
Scrap metal identification and sorting are some of the most important tasks in recycling. The analysis might take days if not months, depending on the pile. But if you have a handheld XRF for scrap metal sorting, speed and efficiency are ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Geosynthetic Lining for Secondary Containment
GCLs can be used around and underneath secondary containment above ground petroleum storage tanks. of above ground storage tanks and are easy to install. Installation details and penetrations are easily handled using simple installation techniques and can be quite cost ...
By CETCO based in New York, NEW YORK (USA).
-
Premium
Hot Sludge Flow Measurement solutions for Wastewater Treatment Plant - Sludge Treatment
Continuous measurement of sludge coming from a digestion tower and being pumped through a heat exchanger. Required to detect possible blockage or reduced pump performance and to ensure permanent heat supply for the WWTP social ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Ultrasonic sensors for hydrofoil & nautical applications
Senix ToughSonic sensors are found on may hydrofoil boats to measure the flying height, including electric and solar foiling boats, and almost all America’s Cup boats. They are also used on other marine applications, and the stainless 316 housings are suited for the salt water environment. Superior real-time performance, rugged submersible construction, internal filtering options and the ability to adjust the sensor to meet the needs of each application are important ...
By Senix Corporation based in Hinesburg, VERMONT (USA).
-
Premium
Water treatment solutions for building industry
Genesis Water Technologies partners with leading property developers, facilities management companies and international construction/project management companies involved in the development of commercial, industrial and multi-family residential housing to integrate advanced grey water reuse, and disinfection solutions ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Premium
Waste reduction for the material recycling industry
Waste Reduction for the Material Recycling ...
By PTF Häusser GmbH based in Borgholzhausen, GERMANY.
-
Premium
Electronic pressure measurement devices for food and beverage industry
Hygiene is as essential in the manufacture of foodstuffs, drinks and tobacco as in the production of pharmaceutical products. This is true not only for the production facilities but also for machinery and plant and in the latter case especially sensors, probes and measuring technology. The design and materials BD|SENSORS uses for their pressure and fill level measuring instruments fully meet the demands made by these markets ...
By BD|SENSORS GmbH based in Thierstein, GERMANY.
-
Premium
Automatic Hydraulic Valves and Water Control Systems for Water Meters Industry
High flow capacity and free water passage with low pressure loss. Self-cleaning tangential impeller suitable for dirty water. Removable and replaceable counter mechanism, one type covers all sizes. Magnetic drive transmission no affected to external magnetic fields. Hermetically sealed super dry dial register condensation free and dust proof. External calibration device locked and adjustable in working condition. Rotating dial for easy reading. Anti-tampering impact resistant metal cover with lock facilities. High ...
By Tecnidro Srl based in Genova (GE), ITALY.
-
Premium
Oil Water Separators for Original Equipment Manufacturers (OEM)
Groundwater Treatment Systems. Wash Water Treatment Systems. Pre-treatment Before Evaporators and Pre-treatment Before ...
By Hydro Quip, Inc. (HQI) based in Seekonk, MASSACHUSETTS (USA).
-
Premium
Application package FLUXANA Glass
This application package is a 'ready to go' calibration kit for xrf instruments. In the glass industry, raw materials have to be analysed together with the quality control samples from production. FLUXANA has created two basic programs Raw Materials (CS-0022) and Glass (CS-0016) for these two purposes, which can be individually adapted by the ...
By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.
-
Premium
Advanced resource recovery and purification solutions for amine purification sector
Amine gas treating, also known as amine scrubbing, gas sweetening and acid gas removal, refers to a group of processes that use aqueous solutions of various alkylamines (commonly referred to simply as amines) to remove hydrogen sulfide (H2S) and carbon dioxide (CO2) from ...
By Kovalus Separation Solutions, Inc. based in Wilmington, MASSACHUSETTS (USA).
-
Premium
Oxygen monitoring from aerobic and anaerobic for biodegradation tests
Biodegradation tests involve testing samples in response to various parameters: dilution, nutrient addition, pH, temperature, and others. The pattern of oxygen uptake in aerobic tests; nitrogen gas production in anoxic denitrification tests; methane production in methanogenic tests; hydrogen production during glycolysis; and carbon dioxide production during fermentation reactions gives a measure of the rate and extent of biodegradation of the organic constituents of the test ...
By Respirometer Systems and Applications, LLC (RSA) based in Fayetteville, ARKANSAS (USA).
-
Premium
Determination of the mercury concentration in naphtha
Introduction The mercury concentration in crude oil and petroleum products can vary in a wide range of less than 0.1 ppb to dozens ppm. Direct mercury determination in crude oil and petroleum products at the range above 5 ppb is covered by ASTM D7622-10(2015) "Standard test method for total mercury in crude oil using combustion and direct cold vapor atomic absorption method with Zeeman background correction". Mercury determination in naphtha and light petroleum products (condensate, gasoline and diesel fuel) at a ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Multiprobes for Coastal
Protect your beaches and waterways by monitoring with equipment you can depend on and the assurance of accurate data. ...
By Eureka Water Probes based in Austin, TEXAS (USA).
-
Premium
Wastewater Treatment Monitoring for Pulp & Paper - Real-time BOD, COD, TSS
In industries such as pulp and paper toxic or difficult to treat contaminants can end up in the waste stream. Not being able to detect these toxic release events or other unexpected events in a timely manner can disrupt the biological treatment system and cause compliance issues or permit violations. Significant benefits can be derived from continuous water quality monitoring with an online sensor system. Real Tech provides practical, low cost solutions for continuously monitoring important industrial wastewater ...
By Real Tech Inc. based in Whitby, ONTARIO (CANADA).
-
Premium
Compressed air and industrial gases solutions for automotive industry
Energy savings solutions in the automotive industry. Compressed air consumption is vital in the car industry. Measuring and monitoring of your compressed air and other utilities will lead to significant system improvements and energy savings. With the introduction of compressed air, the automotive industry has been significantly improved in terms of workers’ safety and overall plant efficiency. Nowadays you will find compressed air in almost all aspects of the car manufacturing process, like vehicle ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Water treatment solutions for the food, beverage & tobacco industry
Food and beverage producers are constantly looking for production optimization while achieving the highest levels of quality and compliance. Lenntech provides sustainable complete solutions for ingredient, water and waste water treatment in food and beverage industry considering a wide range of technologies and ...
By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.
-
Premium
Water and Wastewater Treatment Systems for Health
Water, which draws attention as it ranks first among the basic needs of all of us, creates a serious ecological and biological danger when it is not hygienic enough. Being aware of this, water treatment systems are produced. This is important in terms of health. Water purification systems are used in almost every sector. Especially in places such as hospitals, it is not sufficient for the water in certain units to be clean only. ...
By Zetaş Kimya based in Ostim OSB/Yenimahalle, TURKEY.
-
Premium
Monitors and analysers for Steel industry
Successful steel production requires accurate measurements across a wide range of temperatures, under a variety of different conditions. AMETEK Land is an experienced supplier of non-contact temperature measurement solutions to the steel industry. We deliver dedicated solutions for key applications, and flexible instrumentation that can be customised for specific processes. Our products support higher quality, lower costs, and greater safety across the industry. AMETEK Land provides comprehensive temperature ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you