Waste & Recycling Applications available in South Africa
-
Premium
Recycling equipment for shredding electronic scrap (E-scrap)
Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, and IT equipment need to be destroyed to extract recyclables or ensure the security and complete destruction of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic scrap items do not require the specific size reduction that hard drives or other data storage devices require, all electronic scrap includes recoverable ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
XRF Spectrometers solutions for RoHS and WEEE Testing sector
There is no secret that in the EU, every sphere of the industry that concerns production falls under different regulations that concern waste exposure and recycled materials usage. When it comes to electronics, there are two directives that regulate the issues: RoHS and WEEE. They regulate the existence and concentration of harmful substances in various categories of production (RoHS) and responsibility for the proper recycling of electrical equipment (WEEE). These regulations can prevent appearance on the EU ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Water quality monitoring for semiconductor industry
Water is fundamental to the manufacturing process in a semiconductor facility. Electronic components are rinsed or washed several times during the producing process with ultrapure water (UPW) to remove residue. Continuous monitoring of organic constituents (TOC) on the influent city water assist with UPW production. Good quality waste streams for the manufacturing process can also be monitored for reuse ...
By Real Tech Inc. based in Whitby, ONTARIO (CANADA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Circuit Board Cleanliness Testing Industry
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple 'on line' test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Metal Separators for WEEE
REGULATOR-CETRISA, as manufacturer of metals separation equipment, offers different solutions for cleaning metal pollutants from. Before the E-Waste enter into the shredding process, any contaminating material, like batteries, color cartridges, tonners, etc., must be removed manually from the incoming ...
By Regulator-Cetrisa based in Gavà, SPAIN.
-
Premium
Temperature and gas sensing solutions products for industrial electronics
Optimize performance, boost functionality, and decrease costs. Industrial electronics require high power quality thanks to equipment and process control sensitivity (e.g., factory automation equipment, semiconductor processing, etc.). As a power system designer, you're faced with changing safety regulations, greater performance and functionality demands, increased costs, and size reduction ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA).
-
Industrial shredders for WEEE/cables industry
Since 2003 in Europe, the professionals of the sector of the electric and electronic components must organize dies of recovery, recycling or valorization of their called worn products WEEE (Waste Electrical and Electronic Equipment). Before the evolution of the legislation, Préciméca proposes since 1998 a machine (range 01-02) for the treatment of electronic cards. Large electric household appliances (ranges 50-02, 14-02, 17-02) with the Small household products (14-02, 12-02) to the data-processing components, ...
By Precimeca based in Toulouse, FRANCE.
-
EDXRF spectrometers for electronics (RoHS / WEEE) industry
Compliance with the RoHS and WEEE directives The Energy Dispersive X-ray Fluorescence (ED-XRF) spectrometers offer efficient solutions for the analytical requirements of the determination of regulated substances in electrical and electronic equipment according to the European Directive RoHS (Restriction of Hazardous Substances in Electrical and Electronic Equipment) and WEEE (Waste Electrical and Electronic ...
By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.
-
Waste gas treatment for the TFT industry
Manufacturing TFT/LCD displays requires waste gas treatment as well. Processes that produce large scale Thinfilm Transistors (TFT) on glass substrates, for instance, use Chemical Vapour Deposition – CVD – to separate the thin films onto the material. The process requires cleaning the process chamber periodically and usually employs etching with NF3. Etching of the separated thin films typically utilises CF4, SF6 and chlorinated gases, which release large amounts of waste gas ...
By DAS Environmental Expert GmbH based in Dresden, GERMANY.
-
Waste gas treatment for the LED industry
Market analysts predict sustained growth in demand in the LED industry. After LED backlighting for the small LC displays of mobile phones and the LC displays of larger screens in the television market, the next potential growth market is the lighting industry: Sales of LEDs in this market in 2012 are almost USD 3.5 billion – thus nearly doubling since 2010. Analysts are expecting a growth of more than USD 7 billion in 2014 and believe that the total market for LEDs should peak at USD 17.7 billion.* A mass ...
By DAS Environmental Expert GmbH based in Dresden, GERMANY.
-
Water treatment solutions for microelectronics applications
Consistent ultrapure water (UPW) production is critical for microelectronics manufacturing. SUEZ helps protect product yield, generate savings and improve environmental ...
By SUEZ Water Technologies and Solutions based in Trevose, PENNSYLVANIA (USA).
-
Air pollution control solution for electronics industry
The semi-conductor, circuit board and electronics industry have multiple applications for air pollution control equipment from the control of cleaning solvents and acid gas to the capture of particulate ...
By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).
-
Steinstosser Machine Knives for Electronics & Cables
Steinstosser machine knives account for reliable and efficient size reduction of electronic waste and cables. We supply shredder knives, distance rings, scrapers and sheet gaskets for multi-shaft-shredders, as well as rotor and stator knives for ...
By Schmachtenberg & Steinstosser - Buchholz Group based in Remscheid, GERMANY.
-
Industrial parts cleaning solution for electronic industry
Enviro Tech manufactures EnSolv-Ionic, the leading nPB electronic cleaning solution. We’ve been perfecting this highly effective, patented formula since 1994, when Enviro Tech first opened its doors. Companies around the globe use and trust this stabilized n-Propyl Bromide (nPB) solvent as a cleaning solution for ...
By Enviro Tech International, Inc. based in Melrose Park, ILLINOIS (USA).
-
Oxygen Generating Systems for Waste Gas Treatment in the Semiconductor, PV and LED Industries
Waste gas treatment is an often overlooked but important function of Semiconductor, PV and LED fabrication. Several serious accidents have taken place in factories where no abatement was installed. Even today waste treatment is often seen as a cost rather than a safety issue. There are three main reasons why waste gas treatment is installed in factories: health and safety, environmental factors, and quality ...
By NOVAIR Groupe based in North Tonawanda, NEW YORK (USA).
-
Waste gas treatment for the semiconductor industry
In the early 1990s no appropriate and comprehensive technical solution had been available for waste gas treatment in the semiconductor industry. Back then as well as today many industrial and research production procedures use process gases and generate waste gases. These waste gases, considered greenhouse gases, are toxic and/or highly flammable and very often pose a significant risk to production facilities and the environment. The semiconductor industry, for instance, uses perfluorocarbons, whose global warming ...
By DAS Environmental Expert GmbH based in Dresden, GERMANY.
-
Shredders for Electric and Electronic Equipment (WEEE) and Refrigerators
Electric and electronic waste (WEEE), are coming from technology products such as home appliances (washing machines, vacuum cleaners), computers and tools. An economy based on the consumption such as today, provides a continuous increase of WEEE, and determines an increasing risk of dropping out in the environment or in landfills, with the consequences of pollution of soil, air, water and health human repercussions. These products should be handled properly and used for the differential recovery of the materials ...
By SA Eng. based in San Donà di Piave, ITALY.
-
Innovative gas measurement solutions for electronics industry
Incredible advances in micro-miniaturization of electronic components, integrated circuits and microprocessors have benefited our world and will continue to produce new solutions and conveniences. These advances have resulted in extraordinary innovations, such as very powerful, compact computers, cell phones and various telecommunications devices. And these devices, though inconceivable just a few decades ago, are now common place ...
By Advanced Micro Instruments, Inc. (AMI) based in Costa Mesa, CALIFORNIA (USA).
-
VOC abatement equipments for electronics
Managing overall environmental control is essential for electronics manufacturing processes and operations as well as facilities like battery dry rooms that provide mission critical low dew point ...
By Munters based in Amesbury, MASSACHUSETTS (USA).
-
Laboratory and industrial ovens and furnaces solutions for electronics industry
Within the electronics industry manufacturers of ICs (integrated circuits), PCB and semiconductor devices use Carbolite bench top and floor standing ovens for a number of tests to prove their components. The Carbolite Peak series (PN Natural Convection Oven & PF Fan Convection Oven) as well as the GP General Purpose ranges of ovens are used at elevated temperatures over an extended period for burn-in and stress testing of components to detect faults. Carbolite ovens can accommodate both rack and shelf loading. ...
By Carbolite Gero Ltd - part of Verder Scientific based in Hope, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you