Waste & Recycling Applications
-
Premium
Waste Incineration Application Note
Waste incineration is commonly used to dispose of the organic components of both domestic refuse and hazardous waste by burning it under controlled conditions. The heat generated in this process can be used to generate electricity, a process known as Waste-To-Energy (WTE). Because they have the potential to release highly toxic chemicals, such as polyaromatic hydrocarbons (PAH) and heavy metals, waste incinerators are subject to stringent environmental regulations.Temperature and emissions monitoring equipment ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Steel & industrial refractories solutions for iron ore pelletizer sector
Steel & industrial refractories solutions for iron ore pelletizer sector - ...
By CETCO based in New York, NEW YORK (USA).
-
Premium
Flame Photometer for Recommended Sample Handling Techniques & Considerations
Preparation of Glassware: Thoroughly clean and rinse all glassware with the supplied BWB Technologies deionised distilled water to ensure that it is clean and free of extractable sodium and potassium. Glassware should be acid cleaned and rinsed thoroughly in deionised double distilled water prior to use to avoid contamination from extractable metals under ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
Metal separation and recovery for urban waste treatment industry
By Regulator-Cetrisa based in Gavà, SPAIN.
-
Premium
Respirometry solutions for toxicity testing sector
Waste Type: Complex alcohols. Objective: Certain constituents of the test waste were know to be biodegradable but were suspected of being toxic to aerobic biological processes when present in high concentrations. The objective was then to determine how much waste could be added to an activated sludge process before toxic impacts would be ...
By Challenge Technology based in Springdale, ARKANSAS (USA).
-
Premium
Corrosion-resistant materials for the food & beverage industry
In the food and beverage industry, flooring systems must resist not only bacterial growth, but also corrosion caused by fats, acids and other by-products. These factors, combined with caustic and steam cleaning methods, pose dual threats to floors. In addition, repetitive physical abuse from forklifts demonstrates how these facilities are subject to many destructive ...
By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).
-
Premium
Application package FLUXANA Slag
This application package is a 'ready to go' calibration kit for xrf instruments. The analysis of slags in the metal industry delivers important information about the production process. FLUXANA has developed a fusion slag method which allows the direct analysis of most common slags. Elements of interest and calibrated concentration ranges can be selected individually by the customer. The same application program can also be easily adapted to the analysis of different filter dusts (see ...
By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.
-
Premium
Drinking water solutions for the coagulation optimization - TOC, UV254
Problem: Drinking water plants that use surface water or ground water under the influence of surface water are susceptible to high levels of organic matter in the raw water. Reduction of organic matter through coagulation/sedimentation and filtration is important to lower the potential for disinfection by-product formation (DBP) and limit operational problems. In addition, organics in water consume the polymers used for the coagulation process, which reduces the efficiency of the treatment. Therefore, optimization ...
By Real Tech Inc. based in Whitby, ONTARIO (CANADA).
-
Premium
Ozone generators for industrial application
Disinfection of industrial and chemical freshwater, process water and cooling water. Disinfection, detoxification, decolouration and deoderization of industrial wastewater and improvement of its biodegradability. Oxidation of industrial off gasses. Chemical ...
By Absolute Ozone® based in Edmonton, ALBERTA (CANADA).
-
Premium
Wastewater Evaporator Unit for Ultra-Filter
RunDry Evaporators help our customers with thousands of waste streams and have satisfied clients across the US, Canada and Mexico with a variety of applications. This list shows some of the more common applications for RunDry ...
By RunDry Evaporators based in Mahwah, NEW JERSEY (USA).
-
Premium
Sub-ppm Oil in Water Testing
InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Filtrations solutions for general industrial sector
Plating & Metal Finishing Waste. Tumbling & Deburring Waste. Tannery Waste. Scrubber Sludge. Laundry Waste. Textile Waste. Paint Sludge. Clarifier ...
By D. R. Sperry & Company based in Aurora, ILLINOIS (USA).
-
Premium
Mobile Water Treatment Systems for Military
Mobile water purification, also known as portable water purification. In the absence of healthy water, this situation arises for the drinking water transfer process. ...
By Zetaş Kimya based in Ostim OSB/Yenimahalle, TURKEY.
-
Premium
XRF Spectrometers solutions for alloy analysis sector
Alloy analysis is the process of identification of the chemical composition of the sample. Opposite to PMI (Positive Material Identification), where the alloy grade is determined, it shows the material's whole element composition. The analysis can be carried out by an x-ray fluorescence (XRF) alloy tester, and it is widely used in a variety of industries: from aero-space testing to welding and scrap ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Pumps and Dredging Systems for Mining Dredging
Raw materials are fundamental for the global economy. Extraction, processing, and cleaning are complex and expensive activities that require reliable and efficient machines. Dragflow has been producing and designingmine pumps and dredging equipmentfor years. Our equipment is successfully used by the greatest players in the mining ...
By Dragflow S.r.l. based in Roverbella (MN), ITALY.
-
Premium
Determination of total mercury content in blood by cvaas
INTRODUCTION Blood is one of the most complex substances for determination of the Hg content. At the same time, blood is the most important diagnostic medium used for monitoring the effect of Hg vapor on the human organism. In almost all the countries, personnel of mercury-involving production facilities are regularly examined for the Hg content in blood, which should not exceed 20–50 µg/l, whereas in the case of a person unexposed to mercury vapor the blood normally contains 1–3 µg/l of ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
High-quality shredding solutions for bulky waste shredding sector
If you’re looking for a heavy-duty shredding solution that can easily tear through some of the toughest bulky waste materials in your industry, then any of the slow-speed shredder machines from 3R-Machinery are an excellent fit. Bulky and unwieldy waste can come from a variety of sources and include many different types of materials. You need a super-tough shredder that offers high versatility in its accepted in-fed material types, high durability to withstand regular shredding of large waste items, and high ...
By 3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA).
-
Premium
Water treatment solutions for the food, beverage & tobacco industry
Food and beverage producers are constantly looking for production optimization while achieving the highest levels of quality and compliance. Lenntech provides sustainable complete solutions for ingredient, water and waste water treatment in food and beverage industry considering a wide range of technologies and ...
By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.
-
Premium
Chemical water treatment for refinery
Deposits and corrosion as well as undesired emulsion, foam and toxic gases impact the operation and the occupational safety in refineries. Kurita provides tailored treatment concepts to increase the operational and the occupational safety. Our product lines and technologies are based on decades of experience in process treatment and they contribute to reduce your total operating ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Product Recovery Solutions for Nanoparticles
An increasingly high number of industries, from the fine chemicals to the cosmetics industry, are investing on the design and production of nanoparticles, such as metal oxides, in specific reactors. There is a need to recover these very fine powders from the exhaust streams often at high temperature, pressure and moisture. The very fine particle size precludes the use of mechanical collectors by themselves. The main problem of using barrier filters is product hold-up and breakage of the nanoparticles. Client's ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you