Waste & Recycling Applications in Asia & Middle East

  • Premium

    Odor control for tank cleaning

    When it comes to odor management, simply cleaning the tank isn’t enough to remove the odors. Prior to cleaning, storage tanks are vented to the atmosphere in order to reduce the internal gas content to a level below its lower explosion limit (LEL). This permits safe worker access. During venting, odors escape into the atmosphere creating a nuisance to nearby residents, businesses, and employees. Furthermore, storage tank cleaning results in production downtime that reduces plant profitability.

    By OMI Industries (OMI) Distributor in Bangalore, INDIA.

  • Premium

    Environmental solutions for the automotive and industrial painting industry

    Automotive, industrial painting and other finishing applications. Reliability and uptime are essential. Uninterrupted production—all are essential requirements in painting and finishing applications. Just-in-time manufacturing demands uninterrupted production and smooth pressure control that eliminates pressure fluctuations in the painting and finishing process. Dürr MEGTEC has supplied many systems to tier 1 and tier 2 automotive plants where high volume, low concentration exhaust streams are treated...

    By Dürr Megtec LLC Office in Shanghai, CHINA.

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher,...

    By Dürr Megtec LLC Office in Shanghai, CHINA.

  • Premium

    Environmental solutions for the drying and curing sector

    In the industrial sector, drying and curing technologies from Dürr MEGTEC have been deployed in roll-to-roll processing applications for advanced battery materials, coatings of various types, composites, solar films, membranes, flexible packaging, coil coating, converting, printing, electronics, nonwovens, and other industries. Our patented flotation air bar systems transport webs contact-free without web shift, which helps ensure product quality. Capable of handling webs at a wide range of speeds and...

    By Dürr Megtec LLC Office in Shanghai, CHINA.

  • Premium

    Environmental solutions for the waste incineration industry

    From a regulatory standpoint, the industry is divided into a number of categories: commercial/industrial solid waste incinerators (CISWI), municipal waste combustors (MWC), hospital/medical/infectious waste incinerators (HMIWI), hazardous waste combustors (HWC), sewage sludge incinerators (SSI), and other solid waste incinerators (OSWI). While each sub-category is subject to differing environmental regulations, all can benefit from evaluating their air pollution control requirements.

    By Dürr Megtec LLC Office in Shanghai, CHINA.

  • Premium

    Environmental solutions for the wood products

    Environmental Solutions for Engineered Wood Products.

    By Dürr Megtec LLC Office in Shanghai, CHINA.

  • Premium

    Odors control for solid waste

    A solid solution for solid waste odors. All areas of solid waste handling are, by nature, odorous affairs. Municipal sludge, municipal solid waste, landfills, composting and co-composting facilities all generate odors that can be offensive to workers and the community at large. The process is a complex one, with multiple drops, collections, transfers and sortings of recyclable and non-recyclable material. Combustible materials are then incinerated for energy production.

    By OMI Industries (OMI) Distributor in Bangalore, INDIA.

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have...

    By Myron L Company Distributor in VIETNAM.

  • Premium

    Odor control for liquid waste

    Vaporize Odors Associated With Liquid Waste Processing: Liquid waste, such as fats, oils and grease (F.O.G.) can emit unpleasant odors, which become even more pronounced in various stages of processing. Malodorous F.O.G. from restaurants are often transported by truck to F.O.G. filtering facilities and then to plants where they are processed into useable byproducts.

    By OMI Industries (OMI) Distributor in Bangalore, INDIA.

  • Premium

    Anerobic treatment of wastewater

    30 years of experience in the design, construction, and operation of waste-to-energy plants for a wide range of industrial and municipal clients. Our proprietary anaerobic treatment technologies process wastewater and sludge to produce biogas, which can b

    By Fluence Corporation Office in Beijing , CHINA.

  • Premium

    Metal swarf shredding for the metal industry

    In metal-working shops utilising swarf-producing manufacturing techniques, the generated swarf is often an underestimated cost factor.

    By Erdwich Zerkleinerungssysteme GmbH Office in Singapore , SINGAPORE.

  • Premium

    Waste sorting solutions for the bulky waste

    Bulky waste sorting can produce a high number of valuable materials. The accessibility of these materials, however, is challenging due to its cumbersome nature.

    By TOMRA Sorting GmbH. Office in Moscow, RUSSIA.

  • Premium

    Waste sorting solutions for the refuse derived fuel

    One way in which valuables within waste can be utilized is by using it as fuel. Refuse derived fuel (RDF) is a term that applies to materials with a high calorific value (typically around 18 Mega joule per kilogram) that are removed from waste streams. Beneficiaries of this material are cement kilns to power plants.

    By TOMRA Sorting GmbH. Office in Moscow, RUSSIA.

  • Premium

    Recycling equipments for shredding & reducing medical waste

    Shredding and reducing medical waste poses special challenges. Processing must meet stringent regulatory standards for the safe handling of infectious and red bag waste, including precise size reduction to ensure proper sterilization. In addition, the waste is comprised of many different materials, ranging from sharps to textiles, requiring shredders that can effectively process the variety of materials.

    By Granutech-Saturn Systems Distributor in Pune, INDIA.

  • Premium

    Recycling sorting solutions for the non-ferrous metals - post shredder

    The widespread use of electronic products has created an enormous demand for the sorting of non-ferrous metals such as copper and aluminum. To be usable, these non-ferrous metal fractions must be treated to a high degree of purity. Thanks to TOMRA’s efficient sorting technology, separating these materials from metal waste makes is worthwhile in every aspect.

    By TOMRA Sorting GmbH. Office in Moscow, RUSSIA.

  • Premium

    Recycling equipments for shredding scrap metals

    Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft...

    By Granutech-Saturn Systems Distributor in Pune, INDIA.

  • Premium

    Recycling equipments for non-ferrous scrap metal shredding & recycling

    Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic converters.

    By Granutech-Saturn Systems Distributor in Pune, INDIA.

  • Premium

    Recycling equipments for shredding hazardous waste

    The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements.

    By Granutech-Saturn Systems Distributor in Pune, INDIA.

  • Premium

    Plant solutions for refuse derived fuel (RDF)

    Refuse Derived Fuel (RDF) are fuels derived mainly from industrial waste, bulky and commercial waste or from sorting residues delivered by recyclable material sorting plants.

    By REDWAVE a division of BT-Wolfgang Binder GmbH Office in Singapore, SINGAPORE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you